1) alumina nanowire
Al2O3纳米线
1.
During the aluminum anodic oxidation process,porous aluminum oxide was formed first,then the wall of the pores was dissolved chemically and left a thin nanowire between every adjacent three pores,and finally a special structure of alumina nanowires film was obtained on the surface of anodized aluminum.
研究了一种简单新颖的制备Al2O3纳米线薄膜的电化学方法。
2) nano-Al2O3
纳米Al2O3
1.
A ceramic coating containing nano-Al2O3 particles was prepared on MB2 magnesium alloy by thermo chemical reaction method.
采用热化学反应法在MB2镁合金表面制备了含有纳米Al2O3粒子的陶瓷涂层。
2.
Composite electroless Ni-P/PTFE-Al2O3 coating was prepared by adding nano-Al2O3and PTFE into electroless Ni-P alloy baths.
在化学镀Ni-P合金镀液中添加纳米Al2O3及PTFE制得Ni-P/PTFE-Al2O3复合镀层。
3.
Effects of content of nano-Al2O3 on the tensile strength and bending strength and impact strength of UPR were studied.
用未经表面处理和经过表面处理的纳米Al2O3对不饱和聚酯树脂(UPR)进行填充改性,研究了纳米Al2O3的用量对UPR拉伸强度、弯曲强度、冲击强度的影响。
3) Ni-nano Al2O3
Ni-纳米Al2O3
4) nano Al2O3
纳米Al2O3
1.
Ni-P-nano Al2O3 composite coatings were fabricated by electroless plating.
用化学镀的方法制备了镍-磷-纳米Al2O3复合镀层,研究了热处理温度对镀层硬度和磨损性能的影响,并与二元镍-磷镀层以及镍-磷-Al2O3复合镀层进行了性能对比。
2.
The nano Al2O3 powder was uniformly dispersed in poly(amic acid)solution under the ultrasonic,which was treated by different silicon coupling agent dosage,then the Polyimide/nano Al2O3 hybrid films with different dosage of coupling agent were prepared.
用不同用量硅烷偶联剂处理纳米Al2O3粉体,并借助超声波以一定方式将其均匀分散于聚酰胺酸溶液中,制备出不同偶联剂用量的PI/纳米Al2O3杂化薄膜,并对该杂化薄膜的断面形貌、聚集态结构、热稳定性、力学性能、电击穿场强进行表征测试分析。
3.
Optimization technology of nano Al2O3 prepared by the reverse precipitation method which NH4Al(SO4)2 solution was added into NH4HCO3 solution was experemental studied and discussed.
制备纳米Al2O3是为进一步制备纳米Al2O3/高分子复合材料提供优质原料。
5) nano-Al_2O_3
纳米Al2O3
1.
Nano-Al_2O_3 is a new material and is mainly prepared by chemical synthesis.
文中对纳米Al2O3粉末的化学制备法进行了叙述,并对近年来的一些新方法及常规方法中需要注意的事项进行了着重介绍。
2.
Laser cladding was used as surface modification technology on casting iron and the mixture of nano-Al_2O_3 and iron powder were chosen to serve as surface modification material.
激光熔覆试验对灰铸铁进行表面改性,纳米Al2O3与铁粉混合作为灰铸铁的表面改性材料,对激光熔覆的凝固过程进行了分析,运用金相显微镜和扫描电镜观察灰铸铁的表面改性层组织,观察得到改性层分为熔覆区、结合区与基体区。
3.
The mixtures of nano-Al_2O_3 and iron powder were chosen to serve as surface modification materials,and the surface modification of gray iron was carried out by means of laser cladding technology.
灰铸铁激光熔覆纳米Al2O3后,其磨损机制为犁削磨损。
6) Nanometer Al_2O_3
纳米Al2O3
1.
采用锰铜测压法和小隔板实验(SSGT)测试了纳米Al2O3对HMX临界起爆压力影响,对纳米Al2O3在混合炸药中的作用机理进行了探讨,混合炸药的配比HMX/纳米Al2O3为98∶2,密度为90%理论密度。
2.
The polyetheretherketone (PEEK) based composites filled with nanometer Al_2O_3 or nanometer TiO_2 and polytetrafluoroethylene (PTFE) were prepared by heat compression molding.
以纳米Al2O3、纳米TiO2及聚四氟乙烯(PTFE)作为复合填料,利用热压成型方法分别制备了纳米Al2O3-PTFE及纳米TiO2-PTFE填充聚醚醚酮(PEEK)复合材料;采用销-盘式摩擦磨损试验机考察了纳米微粒对复合材料摩擦学性能的影响;采用扫描电子显微镜观察分析了复合材料磨损表面形貌。
补充资料:赤岗过桥米线
赤岗过桥米线
在赤岗路口附近的金堤过桥米线,环境优雅,出品也不错,人均消费15元左右即可。这里除了过桥米线,还有米饭供应,更有大塘烧腊、住家菜等。米线够大碗,材料又新鲜,吃饭还有例汤送,最紧要是味道也不赖。三四人围着吃,还可以点小炒菜和打火锅,最抵食的6元酸豆角粉也十分好味。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条