1) CNT-TiO_2
CNT-TiO2
1.
The composite material of nanometer TiO_2 decorated carbon nanotubes(CNT-TiO_2) was prepared by acid sol method.
采用酸性溶胶法在碳纳米管(CNT)上负载纳米TiO2颗粒,制备了CNT-TiO2修饰电极,利用TiO2与辣根过氧化物酶(HRP)间的静电吸附及TiO2与羧基的高反应特性,实现了HRP在CNT-TiO2修饰电极表面的固定。
2) CNT/TiO2 composites
CNT/TiO2复合材料
1.
CNT/TiO2 composites were prepared using multi-walled carbon nanotubes(MWCNTs) as a starting material,and titanium(IV) isopropoxide,titanium(IV) propoxide and titanium(IV) n-butoxide as titanium sources and benzene as a solvent.
采用多壁碳纳米管(MWCNTs)为原料,分别以异丙醇钛(TIP)、丙氧基钛(TPP)和四丁氧基钛(TNB)为钛源,苯作为溶剂,制备了CNT/TiO2复合材料。
3) Carbon nanotube-titaniumdioxide composite(CNT-TiO2 composite)
碳纳米管-二氧化钛复合材料(CNT-TiO2)
4) Pt/CNTs
Pt/CNT
1.
A novel method, hydrothermal method, was firstly employed to prepare Pt/CNTs used in proton exchange membrane fuel cell ( PEMFC ) in the work.
首次使用水热法制备用于质子交换膜燃料电池(PEMFC)的Pt/CNT。
5) titanium dioxide
TiO2
1.
Recently the progress has been made in the area of controlling and manipulating photon with photonic crystal of titanium dioxide.
最近利用TiO2光子晶体控制光子的研究取得了一定进展。
2.
Flaky titanium dioxide was prepared by the sol-gel method using Ti(OC4H9)4.
以Ti(OC4H9)4为原料,采用溶胶-凝胶涂膜法制备片状TiO2,探讨了溶胶的性质、涂膜过程、煅烧温度等参数对片状TiO2性能的影响,结果表明:反应温度为30℃,水与Ti(OC4H9)4的摩尔比为2-4, Ti(OC4H9)4与无水乙醇的摩尔比为7-10,pH值为1-3,反应时间为15 min的条件下,通过溶胶涂膜、干燥、剥片及400℃煅烧2 h,可得到具有明显片状结构的TiO2。
3.
The titanium dioxide(TiO2) based photocatalysts were prepared on the adsorption layer of the zeolite which acted as a "nanreactor".
以钛酸丁酯为钛源,天然沸石为载体,采用吸附相反应技术,以沸石表面吸附的水层为"纳米反应器",制备了沸石/TiO2光催化剂。
6) Titania
[英][tai'teiniə] [美][taɪ'tenɪə]
TiO2
1.
In order to obtain visible light response,doping or modifying titania by nonmetal elements such as nitrogen has been investigated extensively in recent years.
为了扩展TiO2光催化剂对可见光的利用,以非金属元素对其进行掺杂和改性是近年来很活跃的研究内容,文献报道主要有氮、碳、硫、氟等非金属元素的改性结果。
2.
The nitrogen doped titania photocatalysts were prepared by nitridation process.
采用氨气氮化工艺制备了氮掺杂的TiO2光催化剂,研究了氮化温度对光催化性能的影响。
3.
The paper reviews the types of core-shell titania composite nanoparticles,their.
本文着重介绍核壳型TiO2的几种类型、特点及其性能,并提出其今后的发展方向。
补充资料：CNT
分子式：C8H7N
分子量：117.15
CAS号：529-19-1
性质：密度0.989。熔点-13°C。沸点205°C。折射率1.5269-1.5289。闪点85°C。水溶性<0.1 g/100 mL at 17°C。
分子量：117.15
CAS号：529-19-1
性质：密度0.989。熔点-13°C。沸点205°C。折射率1.5269-1.5289。闪点85°C。水溶性<0.1 g/100 mL at 17°C。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条