1) blending method
共混法
1.
The preparation methods of polymer/AT composites included in situ polymerization and blending methods, both resulted in fine dispersion of AT.
聚合物/AT复合材料的制备方法主要包括原位聚合(复合)法和共混法,两种方法均可以获得AT良好分散的复合材料。
2.
Nanosized bismuth-doped tin dioxide/waterborne polyurethane nanocomposite materials were prepared by the blending method with self-made nanosized bismuth-doped tin dioxide slurry and waterborne polyurethane as raw materials.
以自制纳米铋掺杂二氧化锡(nano-BTO)分散浆料和水性聚氨酯(PU)为原料,采用共混法制备nano-BTO/水性聚氨酯杂合材料。
3.
Two kinds of phase change materials (PCMs) were prepared by means of chemical reaction and physical blending methods respectively.
结果表明 :采用化学键联法制得的相变材料具有更小、更稳定的微相区 ,并且是通过固—固相变来储能和释能的 ;而采用物理共混法制得的相变材料 ,仅仅是两种原料聚乙二醇和二醋酸纤维素的简单混合 ,实际上发生的仍为固—液相
2) blend
[英][blend] [美][blɛnd]
共混法
1.
The advances in preparing AES resin by direct synthesis and blend were reviewed,containing the technology of solution polymerization,emulsion polymerization,suspension polymerization,application of compatilizer and chemical reaction during the mixture for compatibilization.
概述了直接合成法和共混法制备AES(丙烯腈/三元乙丙橡胶/苯乙烯共聚物)树脂方面的研究进展,包括溶液聚合、乳液聚合、悬浮聚合、加入相容剂增容和利用混合过程中的化学反应来增容等工艺和技术,并提出了关于今后AES树脂制备和应用发展建议。
2.
Stearic acid/silica white as solid - solid phase change material was prepared by blending.
用物理共混法制备了硬脂酸／白炭黑固-固相转变材料,探讨了该固-固相转变材料形成的机理。
3.
Octa-vinyl polyhedral oligmeric silsesquioxane (POSS) was blended with polymethyl methacrylate (PMMA), polyacetoxystyrene (PAS) and polystyrene (PS), respectively, for preparing three new organic/inorganic nanocomposites.
本论文采用溶液共混法将八乙烯基笼型POSS和聚甲基丙烯酸甲酯(PMMA)、聚对乙酰氧基苯乙烯(PAS)、聚苯乙烯(PS)复合,制备了三个系列的新型有机/无机纳米复合材料,利用FTIR、XRD对材料进行了表征,通过DSC、TGA研究了复合材料的热性能。
3) blending
[英]['blendiŋ] [美]['blɛndɪŋ]
共混法
1.
The enthalpy and transition temperature of solid - solid phase change materials of PEG/PET prepared by both chemical bonding method and blending method were studied in the paper.
研究了化学键连法和溶液共混法制备的聚乙二醇/涤纶(PEG/PET)固固相转变材料的相变焓、相变温度等物性,探索了两种材料的链结构与蓄热性能的关系。
2.
The enthalpy,transition temperature and crystallinity of phase change materials (PCMs)prepared by both chemical bonding method and blending method were studied by means of DSC,IR and X-ray.
通过IR、DSC和X -ray研究了用化学键联法和溶液共混法制备的聚乙二醇 /二醋酸纤维素 (PEG/CDA)型相变材料的相变热焓、相变温度和结晶度等物性 ,探索了两种材料的链结构与储热性能的关系。
4) mixing and co-coagulating
乳液共混共凝法
1.
This experiment prepared the silane modifying attapulgite/natural rubber composites(ANRC) by the method of mixing and co-coagulating.
硅烷改性凹凸棒石后,采用乳液共混共凝法制备出了凹凸棒石/天然橡胶复合材料(attapulgite/natural rub-ber composites,ANRC),并对ANRC进行了表征;红外光谱分析证实凹凸棒石得到了有机化改性;ANRC的力学性能测试表明,当天然胶乳浓度适宜?改性剂用量为1。
5) Graft copolymerization-blending method
接枝共聚-共混法
6) solution blending
溶液共混法
1.
The surface of SiO2 nanocomposites was dispersed and modified by supersonic wave and silane coupling agent KH-570, and then blended with PET by solution blending to prepare PET/nano-SiO2 composites.
利用超声波、偶联剂KH-570对纳米SiO2进行了分散和表面改性,用溶液共混法制备了PET树脂/纳米SiO2复合材料。
补充资料：苯乙烯-丙烯腈共聚物/聚碳酸酯共混物
分子式：
CAS号：
性质：系由丙烯腈-苯乙烯共聚物与聚碳酸酯组成的共混物，可改善丙烯腈-苯乙烯共聚物的拉伸强度、热变形温度及冲击强度，并有较好的加工性能，耐溶剂性及耐候性，丙烯腈含量为25%的共聚物与聚碳酸酯共混可获得最好的综合性能，丙烯腈含量小于10%的共聚物与聚碳酸酯共混可得到透明材料，透光率可保持90%以上，机械共混法制取，可用于汽车仪表盘、挡泥板、其他外饰件及商用机器、电器制件等。
CAS号：
性质：系由丙烯腈-苯乙烯共聚物与聚碳酸酯组成的共混物，可改善丙烯腈-苯乙烯共聚物的拉伸强度、热变形温度及冲击强度，并有较好的加工性能，耐溶剂性及耐候性，丙烯腈含量为25%的共聚物与聚碳酸酯共混可获得最好的综合性能，丙烯腈含量小于10%的共聚物与聚碳酸酯共混可得到透明材料，透光率可保持90%以上，机械共混法制取，可用于汽车仪表盘、挡泥板、其他外饰件及商用机器、电器制件等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条