1) denaturation temperature
变性温度
1.
The denaturation temperature of acid-soluble collagen from the Channel catfish was 32.
实验中获得的胶原中甘氨酸最为丰富,质量分数超过23%,酸溶胶原的变性温度为32。
2.
【Objective】Effect of thermal characteristics on PCR processors, denaturation temperature, denaturation time on the validity of detecting HBV-DNA (150 bp amplified) were studied by real-time fluorescent quantification PCR.
目的探讨PCR仪温度特性及变性温度、变性时间对实时荧光定量PCR检测乙型肝炎病毒的影响。
3.
And the denaturation temperature of collagen from Channel catfish bone was 33.
鱼骨胶原蛋白溶液的粘度随着蛋白浓度的增大而增大,其变性温度为33。
2) denatured temperature
变性温度
1.
Subsequently,the relative molecular mass,thermal denatured temperature and secondary structure of extracted collagen were determined.
方法用稀碱溶胀酶解法和缓冲液溶胀分离法分别从水鲨头皮和马鲛鲨皮中分离胶原蛋白,利用聚丙烯酰胺凝胶电泳法(SDS-PAGE)、差示扫描量热仪法(DSC)、园二色谱仪法(CD)对分离胶原蛋白进行纯度及分子大小、变性温度和二级结构的测定。
3) DNA denaturing temperature
DNA变性温度
4) denaturation temperature of protein
蛋白质变性温度
1.
Effects of moisture of flaxseed powder on denaturation temperature of protein;
亚麻籽粉含水率对其蛋白质变性温度的影响
5) brittle transition temperature
脆性转变温度
1.
Series impact tests were carried out to measure the series impact work done to a 400?MPaclass supersteel which was supplied through controlled rolling and cooling rate accelerated with trace element Nb contained, thus giving a brittle transition temperature curve.
以微Nb处理控轧控冷工艺生产的400MPa级超级钢为研究对象,采用"系列冲击实验法"测定系列冲击功,绘制出脆性转变温度曲线·按综合能量法及断口形貌,确定出脆性转变温度为-80℃,并与相同化学成分、普通方法生产的钢板的脆性转变温度加以比较,对这一温度降低的原因进行了分析·分析结果认为,脆性转变温度降低、低温韧性的改善是化学成分、微观组织、轧制工艺综合作用的结果·钢中S、P、Si含量低有利于脆性转变温度的降低、微量Nb的存在有利于脆性转变温度的降低;晶粒细化,亚晶强化是试验钢脆性转变温度降低的组织原因;控轧控冷工艺的采用是降低脆性转变温度的工艺因素
2.
Based on the character of ductile-brittle transition temperature curve, Boltzmann function was proposed to depict the relationship of impact absorbing energy with temperature deterministically and quantitatively.
试验数据的回归分析表明 ,该方法获取的回归曲线具有较高相关系数 ,并能较准确地求取材料脆性转变温度vTr5 4 。
3.
Charpy brittle transition temperature was studied and the mechanical properties and fracture toughness were tested at room temperature and working iemperaiure for 11/4Cr-1/2Mo steel, which has been used in hydrogen with partial pressure 4.
55MPa氢分压下使用12万小时的1 1/4Cr-1/2Mo钢进行了室温及使用温度的力学性能,断裂韧性和夏比冲击功的脆性转变温度的试验研究。
6) FATT
脆性转变温度
1.
The paper studies the facture appearance transition temperature(FATT)of SA335P91/12CrMoV dissimilar steel welding metal.
本课题对异种钢焊接SA335P91/12Cr1MoV的焊缝金属脆性转变温度进行了研究,通过高、中、低3种不同匹配的焊缝金属夏比缺口冲击试验数据的计算及分析,得出SA335P91/12Cr1MoV异种钢3种匹配的焊接接头焊缝金属的脆性转变温度分别为低匹配78℃、中匹配79℃、高匹配91℃。
补充资料：铂电阻温度表(见电阻温度表)
铂电阻温度表(见电阻温度表)
表。bod旧nZu wendubiao铂电阻温度表见电阻温
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条