说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 粘合力
1)  adhesion [英][əd'hi:ʒn]  [美][əd'hiʒən]
粘合力
1.
The oxygen content in Zn-coat has great effect on adhesion of rubberized cord with rubber.
锌层中氧含量对胶带钢丝绳与橡胶粘合力有很大的影响 ,在生产过程中 ,无法避免锌与氧接触生成ZnO。
2.
The influence of sulfur,zinc oxide,accelerator,carbon black and process on the adhesion between rubber and brass plated steel cord was investigated by the orthogonal design method and the comparative test.
采用正交设计法和对比试验法,考察了硫黄、氧化锌、促进剂、炭黑以及某些工艺条件对胶料与镀铜钢丝帘线粘合力的影响。
2)  adhesion strength
粘合力
1.
Effect of cobalt salt on adhesion strength between cord compound and brass-plated steel cord in radial tire;
钴盐对子午线轮胎帘布胶镀铜钢丝帘线之间粘合力的影响
2.
The results showed that the scorch time extended,the aging properties improved significantly,the adhesion strength between rubber and steel cord increased,and the vulcanization delayed by using RF90 resin instead of resorcinol resin in 3 adhesion systems.
结果表明,在3个体系中用RF 90树脂替代间苯二酚可以延长胶料焦烧时间,明显改善胶料的耐老化性能,提高老化前后胶料与钢丝帘线的粘合力,但同时降低了胶料的硫化速度。
3.
The results showed that the reversion resistance,the physical properties of thermal oxidative aged vulcanizate or overcured vulcanizate,and the adhesion strength between rubber and cord were improved by adding 2 phr of DL 268 to NR/SBR compound;and the fatigue heat build up of vulcanizate decreased.
试验结果表明,在NR/SBR 胶料中加入2份硫化剂DL268 ,可改进抗硫化返原性,提高硫化胶在热氧老化或过硫化状态下的物理性能及胶帘线之间的粘合力,降低硫化胶的疲劳温升。
3)  cohesion [英][kəʊ'hi:ʒn]  [美][ko'hiʒən]
粘合力
1.
The cohesion between rubber and steel wire is 438N per piece for 2+2×0.
拉拔出的钢丝与橡胶粘合力:2+2×0。
4)  binding force
粘合力
1.
The binding forces of bead wire with rubber at various technology parameters in the producing process of electroplating copper on bead wire were studied.
对胎圈钢丝电镀紫铜生产过程中不同工艺参数下钢丝粘合力的变化进行研究和分析,探索了影响钢丝粘合力的工艺因素,获得了最佳生产工艺参数,达到了预期目标。
2.
To introduce the matters needing attention in the test for binding force of bead wire with rubber,which are shown from designing of die,thinning of size,cutting of steel wire specimen,size packing in die and taking steel wire out et
介绍在胎圈钢丝与橡胶粘合力试验中应注意的事项 ,从模具设计、胶料的薄通、钢丝样品的截取、胶料的装模操作及钢丝的抽出等几个方面进行了说
5)  high adhesive strength
高粘合力
6)  bond resistance
粘合抗力
补充资料:赤力力
1.亦作"赤历历"。 2.象声词。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条