1) Concasting Thin Strip
连铸薄带
1.
An Analysis on Formation and Distribution of Cracks in 2mm 304 Stainless Steel Concasting Thin Strip;
304不锈钢2mm连铸薄带中的裂纹分布和形成分析
2) strip casting
薄带连铸
1.
Temperature field and thermal deformation of roll sleeve in twin-roll strip casting;
双辊薄带连铸用结晶辊套温度场及其热变形
2.
The surface transverse cracks on AISI304 strip produced by twin-roll strip casting were studied using optical microscopic observation and colored metallographic analysis,with consideration of the near rapid solidification characteristics of strip casting.
采用化学侵蚀和彩色金相等手段,对双辊薄带连铸304不锈钢铸带表面横裂纹的成因进行了研究,并结合双辊薄带连铸亚快速凝固的特点,对薄带表面横裂纹形成的原因进行了综合分析后认为,铸带表面横裂纹均为凝固时产生的高温热裂纹,熔池的液面波动、冷钢和铸辊的表面缺陷等因素导致的铸带表层凝固速度不一致是产生表面横裂纹的根本原因,而在随后的冷却和卷曲过程中,铸带受到各种形式的拉应力则是表面横裂纹得以扩展和加深的主要原因。
3.
Temperature field of cast roll and its thermal deformation were studied during strip casting with elastoplastic and thermal stress coupled FEM.
利用弹塑性热力耦合有限元法,对薄带连铸过程中,结晶辊温度场及其热变形进行了仿真研究,并利用试验数据对仿真结果进行验证,表明仿真结果具有较高精度。
3) strip continuous casting
薄带连铸
1.
The deformation model for 304 stainless steel strip continuous casting, which is based on the hypothesis of frustum of quadrilateral prism, at high temperature and in hot deformation during the necking was presented.
提出了薄带连铸304不锈钢在高温热变形过程中,当出现颈缩时以四棱台进行变形的模型。
2.
This paper researched the single-roll strip continuous casting.
本文以单辊薄带连铸机为研究对象，通过建立传热数学模型，结合热态试验，找出带厚与工艺因素之间的关系，从而为生产出较好质量带坯提供工艺参数。
4) thin strip continuous casting
薄带坯连铸
1.
The development of continuous casting technology in China, conventional continuous casting technology, thin-slab continuous casting and thin strip continuous casting are reviewed briefly.
简要评述了我国连铸技术的发展概况 ,传统连铸技术的发展 ,薄板坯连铸技术发展以及薄带坯连铸技术发展。
5) twin-roll strip casting
双辊薄带连铸
1.
Optimum design of twin-roll strip casting metal distribution devices;
双辊薄带连铸中分配器的优化设计
2.
Study on the characteristic of twin-roll strip casting delivery device;
双辊薄带连铸布流器的布流特性研究
3.
Transport phenomena of the molten steel in a twin-roll strip casting pool have been studied numerically by solving the momentum equation,k-ε two equations along with the species concentration equation.
采用数值模拟的方法研究了双辊薄带连铸熔池内钢液的传输行为,分析了采用V形布流系统时熔池内钢液的流动状态和混合特性。
6) twin roll strip casting
双辊薄带连铸
1.
Study of stainless steel produced with twin roll strip casting process
双辊薄带连铸生产不锈钢技术探讨
2.
An experimental setup which can model dynamically the twin roll strip casting was established.
设计了一个双辊薄带连铸机动态物理模拟实验装置，利用超声波浪高仅对双辊熔池液面波动进行了实验测定。
补充资料：衡阳钢管厂水平连铸机生产连铸圆管坯
衡阳钢管厂水平连铸机生产连铸圆管坯
衡阳钢管厂水平连铸机生产连铸圆管坯
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条