1) swelling resistance
抗溶胀性能
1.
The results showed that black N330,black N660 and fumed silica had better reinforcing effect on phenolic resin-cured BIIR,and a BIIR vulcanizate with better comprehensive physical properties was obtained when 60 phr reinforcing agent was used;and the black N330-reinforced BIIR had optimum thermal aging property and swelling resistance.
结果表明,炭黑N330、N660和气相法白炭黑对酚醛树脂硫化BIIR胶料均有较好的补强效果,补强剂用量为60份时BIIR胶料的综合物理性能较好;炭黑N330补强BIIR胶料的耐热老化和抗溶胀性能最好。
3) swelling properties
溶胀性能
1.
g, by swelling properties of the vulcanizates after elongation, Lorenz-Parks Equation and by Kraus Formula.
从复合材料的溶胀性能出发 ,用三种不同方法———试样的拉伸破坏溶胀、Lorenz-Parks方程和Kraus公式分析了短纤维 /橡胶的界面粘合状况。
2.
A study was made on the influence of length of nylon and polyester fibres on the physical and swelling properties of nylon/NR and polyester/CR composites.
本文就尼龙、聚酯短纤维的长度对尼龙－天然橡胶以及聚酯－氯丁橡胶复合材料的物理性能和溶胀性能的影响进行了理论研究。
3.
In this thesis, the physical and heat-aging properties of chlorinatedcis-1, 4-polybutadiene composite were mainly studied, and the swelling properties ofthe composite were also studied.
对尼龙短纤维预处理，短纤维与橡胶基质的粘合性能改善，与氯化顺丁橡胶形成的复合材料的力学性能、耐热性能提高，耐溶胀性能也明显提高。
4) swelling performance
溶胀性能
1.
Based on the above,the authors discussed the relation between the montmorillonite content,the exchangeable cationic type between layer and its amount,the montmorillonite structure and the swelling performance of bentonite.
通过测定夏子街钠土、吉林四平钠土、浙江安吉钙土、泗安钙土、常山钙土基本的物化性能,并对其蒙脱石矿物结构进行分析,探讨了蒙脱石含量、层间可交换阳离子种类和数量、蒙脱石矿物结构特点与膨润土溶胀性能之间的关系。
2.
Discussing the corrlelation between the montmorillonite content, the layer ion - exchange type and amount, the montmorillonite structure with swelling performance of bentonite.
本文通过测定新疆钠土、吉林钠土、安吉钙土、泗安钙土、常山钙土基本的物化性能,并对其蒙脱石矿物结构进行分析,探讨了蒙脱石含量、层间可交换阳离子种类和数量、蒙脱石矿物结构特点与膨润土溶胀性能之间的关系。
3.
The swelling performance of many kinds of "O" -type rubber sealing collar made by different material in biodiesel or mixed diesel were studied,and compared with those in 0# diesel.
研究了多种不同材料的"O"型橡胶密封圈在生物柴油、混合柴油中的溶胀性能,并与0#柴油进行了对比。
5) swelling property
溶胀性能
1.
The effect of various reaction parameters on the swelling property was investigated systematically, such as the concentration of the monomer, the content of the initiator, reaction time and temperature, as well as intercalation with montmorillonite(MMT).
分别考察了单体浓度、引发剂用量、反应时间、反应温度及与蒙脱土(MMT)插层复合对接枝反应产物溶胀性能的影响,确定了最佳制备条件。
2.
Their swelling property and separation property for biomacromolecules were studied.
合成了均聚的聚N 异丙基丙烯酰胺(PNIPAM)水凝胶以及N 异丙基丙烯酰胺与丙烯酰胺共聚的〔P(NIPAM-AM)〕水凝胶,并研究了它们的溶胀性能及其对生物大分子的萃取分离性能。
6) swelling
[英]['swelɪŋ] [美]['swɛlɪŋ]
溶胀性能
1.
With increasing the amount of waterabsorbent resin, the tensile strength of CPE/P (AAAMHMA) decreased, the equilibriumswelling ratio increased.
采用机械共混将氯化聚乙烯(CPE)与自制的吸水树脂丙烯酸 丙烯酰胺 甲基丙烯酸羟乙酯共聚物[P(AA AM HMA)]共混,并且以合成的两亲聚合物为共混试样的增容剂实施增容,讨论了吸水树脂以及增容剂对共混试样的力学性能和溶胀性能的影响。
2.
The results indicate that the tensile strength of CPE/P(AA AM) decreases, the equilibrium swelling ratio increases with increasing the amount of water absorbent resin.
采用机械共混将氯化聚乙烯 (CPE)与自制的吸水树脂丙烯酸 -丙烯酰胺共聚物 (P(AA- AM) )共混 ,并且以合成的两亲聚合物为共混试样的增容剂实施增容 ,讨论了吸水树脂以及增容剂对共混试样的力学性能和溶胀性能的影响。
3.
The effect of reaction parameters,such as the amount of initiator,crosslinker,AA and AM as well as reaction temperature/time on the swelling behavior and responsive properties of the hydrogel was investigated.
以丙烯酸(AA)、丙烯酰胺(AM)两种单体同时对壳聚糖(CTS)进行接枝改性,合成了具有环境响应性的壳聚糖水凝胶,讨论了各合成因素对凝胶溶胀性能的影响及凝胶对pH值、离子强度和温度的响应性。
补充资料：抗溶胀性
分子式：
CAS号：
性质：固体浸渍于液体或暴露于蒸气中尺寸不变化的能力。当固体高聚物浸渍于溶剂，溶剂分子会渗入高聚物内部。随后，线型高聚物分子会均匀分散在溶剂中，逐渐形成完全溶解的分子分散的均相体系。对于交联的高聚物，因有交联的化学键束缚，不能再进一步使交联的分子拆散。交联度大的高聚物溶胀度小，交联度小的高聚物溶胀度大。也可以用物理的方法，比如在木材表面涂漆来阻止水分的进入材质，从而也就提高了这一构件的抗溶胀性。
CAS号：
性质：固体浸渍于液体或暴露于蒸气中尺寸不变化的能力。当固体高聚物浸渍于溶剂，溶剂分子会渗入高聚物内部。随后，线型高聚物分子会均匀分散在溶剂中，逐渐形成完全溶解的分子分散的均相体系。对于交联的高聚物，因有交联的化学键束缚，不能再进一步使交联的分子拆散。交联度大的高聚物溶胀度小，交联度小的高聚物溶胀度大。也可以用物理的方法，比如在木材表面涂漆来阻止水分的进入材质，从而也就提高了这一构件的抗溶胀性。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条