1) sodium sulfoacetic
磺酸乙酸钠
1.
A method for synthesizing sodium sulfoacetic is discussed,which sodium sulfoacetic is synthesized with sodium sulfite and ethyl monochloro acetate,with sodium sulfite and chloroacetic acid.
主要分别介绍用亚硫酸钠与氯乙酸乙酯合成磺酸乙酸钠和亚硫酸钠与氯乙酸合成磺酸乙酸钠。
2) sodium 2-bromoethyl sulfonate
溴乙磺酸钠
1.
The optimum conditions were obtained as follows:the molar ratio of hexadecyl amine: sodium 2-bromoethyl sulfonate=1.
以十六胺和溴乙磺酸钠为原料合成了十六胺乙基磺酸钠,用单因素优选法研究了影响反应的因素,优化反应条件为n(十六胺)∶n(溴乙磺酸钠)=1。
3) ethenesulfonic sodium
乙烯磺酸钠
1.
It was obtained with ethylenediamine and ethenesulfonic sodium as primary material through addition.
采用乙二胺和乙烯磺酸钠为主要原料,经过加成反应合成了乙二胺双乙基磺酸钠。
2.
It was obtained from ethylenediamine,ethenesulfonic sodium and decanoic acid as primary materials through addition and acylation.
采用乙二胺、乙烯磺酸钠和癸酸等为主要原料,在低温常压下,经过加成、酰化等反应,合成了一种新的Gem in i(双子)表面活性剂——N,N’-双癸酰基乙二胺二乙磺酸钠,以1H NMR和IR进行结构表征,考察了原料的物料比、反应温度、反应时间等工艺条件对产物收率的影响。
4) mesna
巯乙磺酸钠
5) Sodium styrene sulfonate
对苯乙烯磺酸钠
1.
A study was made on the preparation of the cation-exchange membranes including sulfonate and carboxylic acid groups by pre-irradiation grafting of acrylic acid(AA) and sodium styrene sulfonate(SSS) onto high-density polyethylene(HDPE).
利用电子束引发预辐射接枝技术,在高密度聚乙烯(HDPE)上接枝丙烯酸(AA)和对苯乙烯磺酸钠(SSS),制备一种含羧酸基团和磺酸基团的双功能基阳离子交换膜,详细研究了反应温度、单体总浓度、pH值变化及溶剂类型对接枝率的影响规律,明确了实验条件与接枝率的对应关系。
2.
A study was carried out on the preparation of cation-exchange membranes using a one-step method obtained by pre-irradiation grafting of acrylic acid (AA) and sodium styrene sulfonate (SSS) onto high-density polyethylene (HDPE).
高密度聚乙烯预辐照接枝丙烯酸和对苯乙烯磺酸钠单体混合溶液,运用一步法制备了一种羧酸基团和磺酸基团共存的阳离子交换膜,并考察了单体总浓度、辐照剂量、反应温度及交联剂用量诸因素对接枝率的影响规律,找到了实验条件与接枝率的对应关系。
6) sodium polystyrene sulfonate
聚苯乙烯磺酸钠
1.
Preparation and characterization of a new pharmaceutical grade excipient:sodium polystyrene sulfonate-ion exchange resin;
一种新型药用辅料——聚苯乙烯磺酸钠离子交换树脂的合成与表征
2.
Characteristics of the new excipient sodium polystyrene sulfonate;
聚苯乙烯磺酸钠理化性质的考察
3.
Study on Sodium Polystyrene Sulfonate Drug-resins Liquid Sustained-release System;
聚苯乙烯磺酸钠药物树脂液体缓释给药系统的研究
补充资料：脱氢乙酸钠
分子式：C8H7NaO4
分子量：190.13
CAS号：4418-26-2
性质：熔点295°C (dec.)。
分子量：190.13
CAS号：4418-26-2
性质：熔点295°C (dec.)。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条