1) dispersed phase
分散相
1.
Study on dispersed phase size distribution in combined-blown converter with water modeling;
复吹转炉水模分散相粒度分布的研究
2.
Power-function representation of particle size distribution for dispersed phase in water modeling of converter
转炉水模分散相粒度分布的幂函数表征
3.
Based on the introduction of present formulation about dispersed particle dimension and coalescence probability of dispersed phase, it can be concluded that the combination of theory and experiment is an effective method of obtaining phase dimension of immiscible polymer blends.
阐述了不溶混聚合物共混体系相态的形成与发展过程 ,对影响共混体系相态尺寸的因素进行了分析 ,通过对目前建立的各种分散相粒径大小及其聚结概率计算公式的介绍与分析 ,认为理论与实验相结合的方法是获得不溶混聚合物共混体系相态尺寸的有效途
2) Disperse Phase
分散相
1.
22 mm/s and the disperse phase superficial velocity was 1.
萃取温度为40℃,空气和分散相的表观流速分别为(0~3。
2.
The recent advances in composite particles disperse phase used in electrorheological fluids are re- viewed.
综合论述了近年来复合分散相电流变液的研究进展,重点论述了多组分掺杂的分散相、不同组分间包覆的分散相以及纳米复合材料作为分散相的几种体系的制备方法、结构和电流变机理,并提出复合电流变材料的发展方向。
3.
By use of disperse phase and pre composite,the microstructure of aluminium titanate is improved,the anomalous growth of crystal and the flaw forming are restrained in the course of cooling.
用分散相、先驱体有效地改善了钛酸铝合成材料的显微结构，控制了钛酸铝在冷却过程中所形成的微裂纹和钛酸铝晶粒的异常生长，提高了钛酸铝材料的烧结能力及力学性
3) dispersion phase
分散相
1.
A recent use of the research achievement of reinforcing by on site composite technology was reviewed in this article,with a description made mainly with emphasis on the several fiber formation effecting factors,such as compatibility of the continuous phase and dispersion phase in the blend,viscosity ratio,interfa-cial tension,p.
本文综述了近年利用原位复合技术增强的研究成果,主要从共混体中连续相和分散相的相容性、黏度比、界面张力、加工成型参数(剪切速率、毛细管或口模的形状和大小、加工温度)这几个成纤影响因素作了重点阐述。
2.
The development process and reinforcing mechanism of the nanodispersion phase structure in the insitu polymerized nanoPZDMA/POE were investigated by microscopy and thermogravimetric analysis and the dependence of the stressstrain behavior and tensile strength of PZDMA/POE composite on the temperature was also studied.
利用显微镜观察和热分析方法研究了原位聚合纳米聚甲基丙烯酸锌(PZDMA)补强乙烯 α辛烯共聚物(POE)材料(简称PZDMA补强材料)的纳米分散相结构的生成历程和补强机理,探讨了PZDMA补强材料的应力 应变特性及拉伸强度与温度的关系。
3.
The droplet size and distribution of dispersion phase for emulsion explosives matrix were tested by laser particle analyzer.
结果表明:在一定条件下,水相析晶温度对分散相液滴大小与分布有较明显的影响;乳化搅拌速度存在一个临界值,本实验条件下此值为1230 r。
4) scattered-element
分散相
1.
Aggregates could be regard as scattered-element in concrete, and i.
集料作为混凝土分散相,在普通混凝土中,其对混凝土强度贡献不如基体大,但是,在高强混凝土中,集料性能对混凝土强度影响较大。
5) discrete phase
分散相
1.
Fractal characterization of uniformity of discrete phase in nanocomposites
纳米复合材料分散相分散均匀性的分形表征
6) solution dispersion
液相分散
1.
Nanocrystalline Pb powders were prepared, starting from Pb granules, by solution dispersion method in paraffin oil, using polyglycol as a protecting agent and oxidation inhibitor.
以铅粒为起始原料 ,聚乙二醇为保护剂和抗氧化剂 ,采用液相分散法成功地制备出了铅纳米晶 ,并采用投射电子显微镜和X -射线粉末衍射仪对其形貌和结构进行了研究。
2.
Oil soluble tin nanoparticles with average diameter of 40 nm have been successfully prepared by solution dispersion method.
用液相分散法制得了油溶性锡纳米微粒 ,平均粒径为 4 0nm。
补充资料：分散相
分子式：
CAS号：
性质：又称弥散相。合金内以细小而弥散分布的微粒的形式存在的相。在合金钢中，存在细小微粒弥散分布的相，它对晶界有钉孔和扩大相界面作用，使合金的强度和硬度增加。
CAS号：
性质：又称弥散相。合金内以细小而弥散分布的微粒的形式存在的相。在合金钢中，存在细小微粒弥散分布的相，它对晶界有钉孔和扩大相界面作用，使合金的强度和硬度增加。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条