1) heat power
热功率
1.
Based on the calorigenic mechanism of gearbox and the heat power theory,the numerical heat power of AK320 gearbox is calculated using the data generated from real 3D model of gearbox.
根据齿轮传动箱的发热机理和热功率评估理论,采用箱体三维实体造型所生成的相关数据,分析估算了AK320齿轮传动箱的热功率数值,在此基础上针对运行中的问题提出了改进措施,保证了该齿轮传动箱的正常运行。
2.
Heat generation and dissipation processes of Jinchuan group s large-scale belt transport-er-reductor are briefly introduced, and the specified heat power is calculated according to the actual heat dissipation capability.
简述了金川集团公司大型皮带驱动站B3SF-560型减速机的发热过程和散热过程,根据其实际的散热能力计算出了该减速机的额定热功率。
3.
On the basis of specified thermal power of the prototype machine,the specified heat power is appoximated.
简述了四环板式针摆行星传动减速器的发热过程和散热过程,由热力学公式分别计算出样机各种散热途径的散热量,并根据样机的散热能力近似地计算出了样机的额定热功率。
2) thermal power
热功率
1.
Effect of radiators on the thermal power of gear reducers in coalmine;
散热措施对矿用减速器热功率的影响
2.
The static characters, arc shape and thermal power of the anode and cathode are measured and discussed for different Ar-He gas ratio.
采用水冷紫铜阳极和水冷TIG焊枪,在60~400A的直流电流范围内,对钨极氩-氦混合气体电弧的行为进行了测定和分析,主要测定和讨论了氩、氦及其不同配比的混合气体电弧的静特性、电弧形态、阴极热功率、阳极热功率等内容。
3.
Based on an exact mathematic model, a measurement method regarding core thermal power of nuclear power pressurized water reactor and it s error analysis were presented in this paper.
通过建立精确的数学模型 ,提出了一种测量核电站压水反应堆堆芯热功率的方法 ,并对该方法进行了误差分析。
3) heat-power
热功率
1.
Methods of improving the heat-power of retarder;
提高齿轮减速器热功率的措施
2.
The analyse method of heat-power on crawler gear-reducer was told,and compared the calculate result with the experiment result.
介绍了行走减速器热功率分析的方法,并与试验结果进行了分析对比。
4) heating power
热功率
1.
According to the electromagnetic wavetransmitting equation in good conductor,get the eddy currents 'heating power in sheet metal,then some factors that affect heating power are di-scussed.
根据良导体中的电磁波基本方程,导出了针对金属薄板涡流的热功率公式,讨论了影响其热功率的因素,对电磁加热的实际应用有一定的意义。
5) heating power
加热功率
1.
Finally by a series of ice experiment, graphs of heating boards and heating power is drawn, testing the performance desired of heating system.
介绍了新一代食品真空冷冻干燥实验机NTFD05E加热系统的结构、设计的参数及计算过程,并通过一系列冰实验得到了加热板与加热功率的关系图,从而验证了加热系统的性能要求。
2.
Three kinds of method for calculating heating power of hot runner plate were listed for references of design of hot runner moulds.
介绍了避免或减小热流道模具中热流道板加热后膨胀导致喷嘴的中心线产生的偏移的几种补偿结构,列举了3种热流道板加热功率的计算方法,可为热流道模具的设计提供参考。
3.
Through the practical test of cemented carbide pressure sintering furnace, a heating power calculation model of cemented carbidepressure sintering furnace was established on the basis of the heat balance equation of furnace system.
通过对硬质合金压力烧结炉的实际测试,根据系统热平衡原理,建立了硬质合金压力烧结炉的加热功率计算模型。
6) Endothermic power
吸热功率
补充资料：负温度系数热敏电阻陶瓷(见热敏陶瓷)
负温度系数热敏电阻陶瓷(见热敏陶瓷)
thermo-sensitive ceramics with negative temperature coefficient
负温度系数热敏电阻陶瓷thermo一sensitiveeeramies with negative temperature eoeffieient在某一特定温度范围，电阻率随温度的升高而明显减小的热敏陶瓷。简称NTC陶瓷。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条