1) ketoimine
[,ki:təu'imi:n]
酮亚胺
1.
The product of cyanosilylation of ketoimines is the intermediate precursor ofα,α-dialkylated amino acids.
酮亚胺的腈化产物是α位双烷基化α-氨基酸的重要中间体,在生物化学、制药及有机合成方面都具有重要意义。
2.
A series of metal complexes supported by N-aryloxo-β-ketoimine were synthesized, including alkali metal complexes, lanthanide complexes, and aluminum complexes.
本论文采用N-芳氧基功能化的酮亚胺为辅助配体,合成了一系列酮亚胺基金属配合物,包括碱金属配合物、稀土配合物和铝的烷基配合物。
2) ketimine
['ki:tə,mi:n]
酮亚胺
1.
The Research on Preparation and Performance of Ketimine Curing Agent;
新型酮亚胺改性固化剂的合成及其性能研究
2.
The influeuce of charging approaches and dosage of ketimine on hardness,thickness,water resistance,acid resistance,alkali resistance,heat stability and mechanical performance of the paint film were studied.
用丙酮分别和乙二胺、己二胺反应制备酮亚胺,并以其作为潜伏性扩链剂改善水性聚氨酯(PU)的性能。
3.
It consists of four main parts of (1) study of the preparation and properties for the IPDI based waterborne polyurethane, (2) the synthesis of ketimine and modification of aqueous polyurethane, (3) modification of water-based polyurethane dispersions by polyacrylate, and (4) preparation of "living" radical macromolecule initiator.
本论文由四部分组成：1)IPDI基阴离子水性聚氨酯树脂的制备与性能研究 2)酮亚胺的制备及其对水性聚氨酯性能的改进 3)新型丙烯酸酯改性聚氨酯水性树脂的制备与性能研究 4)活性自由基聚合大分子引发剂的制备。
3) poly(imino ketone)
聚亚胺酮
1.
Novel poly(imino ketone)(PIK) was synthesized via palladium catalyzed polycondensation reaction.
以二溴化芳香酮和芳香二胺为单体,通过钯催化的胺化缩聚反应合成了新型聚合物——聚亚胺酮,其结构经1HNMR,IR和元素分析确认。
2.
1,4-Bis-(4-bromobenzoyl)benzene as the monomer of poly(imino ketone) was synthesized by Friedel-Crafts benzoylation reaction.
通过傅-克酰基化反应合成了1,4-双-(4′-溴苯酰基)苯,以1,4-双-(4′-溴苯酰基)苯和4′4-二氨基二苯醚为单体,通过钯催化的胺基化缩聚反应合成了高性能聚合物——聚亚胺酮-Ⅱ(PIK-Ⅱ)。
3.
Novel poly(imino ketone) s (PIKs) as high performance polymers were obtained by the condensation polymerization of 1,4-bis-(4-bromobenzoyl)benzene and aromatic diamines as the monomers via palladium-catalyzed amination reaction.
以1,4-双-(4′-溴苯酰基)苯和芳香二胺为单体,通过钯催化的胺基化反应缩聚合成了新型高性能聚合物——聚亚胺酮(PIKs)。
4) poly(imino ketone)s
聚亚胺酮
1.
Synthesis and properties of Poly(imino ketone)sas high-performance polymers;
新型高性能材料-聚亚胺酮(PIKs)的合成与性能
5) α-iminoketone
α-亚胺酮
1.
Asymmetric transfer hydrogenation of α-iminoketone methyl 5-[(1,1-dimethylethyl)- imino]acetyl-2-hydroxybenzoate (2) using chiral (S,S)-Ru-TsDPEN as catalyst, gave the optical pure β-amino-1-arylethanol derivative methyl 5-[2-[1,1-dimethylethyl]amino]-1-hydroxyethyl]-2-hydroxyben- zoate (3), which was reduced to afford (R)-(-)-salbutamol.
用手性(S,S)-Ru-TsDPEN催化剂不对称转移氢化α-亚胺酮化合物5-[(1,1-二甲基乙基)亚胺基]乙酰基-2-羟基苯甲酸甲酯(2)得光学纯β-氨基芳基乙醇类化合物(R)-5-[2-[(1,1-二甲基乙基)氨基]-1-羟乙基]-2-羟基苯甲酸甲酯(3),再经一步还原反应即得(R)-(-)-沙丁胺醇。
6) uretoinime
脲酮亚胺
1.
A series liquefied MDI (carbodiimide modified MDI) containing different amount of carbodiimide and uretoinime were synthesized by controlling carbodiimide conversion, samples were analysized by gel chromatogram, by the same time, all peaks in GPC spectrum were detected and determined their corresponding component by infrared spectrum.
液化MDI是MDI类异氰酸酯的重要品种之一 ,通过控制碳化二亚胺转化率可合成具有不同含量碳化二亚胺、脲酮亚胺等官能团的碳化二亚胺改性MDI,采用凝胶色谱法 (GPC)分析产品 ,同时辅以红外光谱 (IR)检测确定凝胶色谱谱图中各个峰对应组
补充资料：酮亚胺
分子式：
CAS号：
性质：酮和氨(或伯胺)缩合生成的化合物。最简单的酮亚胺为丙酮亚胺(CH3)2C＝NH。可发生水解反应生成原来的酮和胺。还可与氰氢酸，格利雅试剂反应。尚可发生还原反应。可用酮与伯胺反应制取。常见的酮亚胺有：N-苯基丙酮亚胺(CH3)2C＝N—C6H5，熔点23.5℃，沸点86℃(2.3kPa)；N-苯基环己酮亚胺，沸点206℃(3.199kPa)；二乙基酮亚胺(C2H5)2C=NH，沸点86.5℃(97.30kPa)，折射率1.4626。用作有机合成试剂和液晶材料。
CAS号：
性质：酮和氨(或伯胺)缩合生成的化合物。最简单的酮亚胺为丙酮亚胺(CH3)2C＝NH。可发生水解反应生成原来的酮和胺。还可与氰氢酸，格利雅试剂反应。尚可发生还原反应。可用酮与伯胺反应制取。常见的酮亚胺有：N-苯基丙酮亚胺(CH3)2C＝N—C6H5，熔点23.5℃，沸点86℃(2.3kPa)；N-苯基环己酮亚胺，沸点206℃(3.199kPa)；二乙基酮亚胺(C2H5)2C=NH，沸点86.5℃(97.30kPa)，折射率1.4626。用作有机合成试剂和液晶材料。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条