1) ferritic stainless steel SUS430
SUS430型铁素体不锈钢
1.
Production process technology development of cold-rolled sheet of ferritic stainless steel SUS430 with good ridging resistance;
具有良好抗皱性能的SUS430型铁素体不锈钢冷板生产工艺技术的开发
2) SUS430 Stainless Steel
SUS430不锈钢
3) 00Cr12 ferrite stainless steel
00Cr12型铁素体不锈钢
1.
00Cr12 ferrite stainless steel is widely used in industries due to its high strength and ductility,good corrosion and wear resistance,and low cost.
00Cr12型铁素体不锈钢是一种价格低廉、耐大气腐蚀及磨损性能优良、强度与塑性可与常用耐侯钢媲美的经济型不锈钢。
4) Cr11 Ferritic Stainless Steels
Cr11铁素体不锈钢
5) ferritic stainless steel
铁素体不锈钢
1.
Analysis of the welding methods of TCS ferritic stainless steel used on railway vehicle;
铁路货车车体用TCS铁素体不锈钢焊接方法分析
2.
Influence of rare earth element on the mechanical properties and microstructure of ferritic stainless steel;
稀土对低铬铁素体不锈钢组织与力学性能的影响
3.
Electrolytic dissolving ferritic stainless steel by layers and determination of chromium and silicon in the surface and the matrix of the stainless steel;
电解法逐层溶解铁素体不锈钢并测定表层和基体中铬和硅的含量
6) ferrite stainless steel
铁素体不锈钢
1.
Appearance of weld and impact toughness for the joints of ferrite stainless steel by laser-MAG hybrid welding
铁素体不锈钢激光-MAG复合热源焊缝成形及接头冲击韧性分析
2.
The effect of welding heat input on the microstructure and mechanical property of HAZ of 00Cr12NiTi ferrite stainless steel,which is used in manufacture of rail trucks,welded by MAG welding was investigated.
研究了铁道车辆用铁素体不锈钢00Cr12NiTi在MAG焊时,焊接热输入对HAZ的组织及性能的影响。
3.
RE effect and mechanism in ferrite stainless steel have been studied by metallographic analysis,SEM and EDAX.
采用金相、扫描电镜和能谱仪等手段,研究了稀土在430铁素体不锈钢的作用及作用机理,研究结果表明,稀土通过缩小柱状晶区域及细化柱状晶,扩大中心等轴晶区域及细化中心等轴晶,可提高冷轧板薄板成型性能;稀土改善夹杂物形貌、变性夹杂物组分,提高了430铁素体不锈钢冲击性能;稀土促进Cr和Mn元素在氧化层的富集,使氧化层致密,氧化层与基体的粘附性增强,大幅度提高了430铁素体不锈钢抗高温氧化性能。
补充资料：Ferroxon 430
分子式：
分子量：
CAS号：1332-37-2
性质：
分子量：
CAS号：1332-37-2
性质：
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条