1) melt spinning
熔纺
1.
The development on the research of melt spinning polymer of elastic fiber;
弹性纤维熔纺聚合物研究的进展
2.
The quenching equipment,quenching technique of melt spinning and the progress on the research of computer simulation of melt spinning quenching process are introduced.
介绍了熔融纺丝的吹风冷却装置、吹风技术及熔纺冷却过程的计算机模拟研究的新进展。
3.
The domestic and external current situations of research,pro duction and development of the melt spinning polyurethane fiber an d the thermal plastic polyurethane c hip are reviewed.
综述了国内外熔纺氨纶及其热塑性聚氨酯切片的研究、生产及其发展的情况,分析了熔纺氨纶的优点和不足,并对熔纺氨纶开发研究及生产的发展趋势作了展望。
2) melt-spinning
熔纺
1.
Research and development of melt-spinning spandex equipment;
熔纺氨纶设备的研究及开发
2.
Effect of addition agent quantity on the melt-spinning polyether type polyurethane fiber;
添加剂用量对醚型熔纺聚氨酯纤维性能的影响
3.
The effects of melt-spinning temperature,spinning channel temperature and spinning-stretch ratio on the orientation and drawability of as-spun fibers were investigated.
选用国产ＰＥＥＫ树脂，系统研究了熔纺温度、热甬道温度及初始拉伸比对初生丝取向和拉伸性能的影响。
3) melt direct spinning
熔体直纺
1.
Effect of unstable factors in PET production on melt direct spinning;
聚酯生产过程不稳定因素对熔体直纺的影响
2.
The development of melt direct spinning 84 dtex/36 f flat FDY;
熔体直纺84 dtex/36f扁平丝开发
3.
The development of melt direct spinning of 167dtex/144f polyester FDY;
熔体直纺167dtex/144fFDY长丝的开发
4) melt spinning
熔融纺丝
1.
Review on the precursors of PAN based carbon fibers obtained from melt spinning;
熔融纺丝工艺制备碳纤维原丝
2.
Analysis of the frequency converting speed regulating system on melt spinning machine;
浅析熔融纺丝机变频调速系统
3.
Preparation of poly(ether sulfone)fiber via melt spinning process;
熔融纺丝法制备聚醚砜纤维
5) melt-spinning
熔融纺丝
1.
Synthesis and Melt-spinning of Polyferrocarbosilane as a Functional Silicon Carbide Precursor;
功能性碳化硅先驱体聚铁碳硅烷的合成及熔融纺丝
2.
Development of Preparing Hollow Fiber Membrane by Melt-spinning;
熔融纺丝制备中空纤维膜研究进展
3.
PP is through melt-spinning process then antibacterial and antistatic fibers are produced by melt spinning the blends of polypropylene and the antimicrobial agents and the antistatic agents.
选用钛酸酯偶联剂对纳米抗菌和抗静电混合粒子进行了表面修饰,并用透射电镜、接触角和红外光谱三种方法进行了表征,将经修饰的粒子与聚丙烯共混并熔融纺丝,考察了其纺丝及拉伸性能。
6) melt-spinning
熔体纺丝
1.
The hollow fiber membranes were prepared by melt-spinning.
经熔体纺丝制得聚氨酯系中空纤维膜,对纤维膜的微孔结构及其压力响应性能进行了研究,并分析了影响纤维膜压力记忆效应的因素。
2.
Based on the principle of polymer blend phase separation and the way of washing-out additive to form the micro-voids,PEG as additive,PU/PVDF hollow fiber membrane was produced with the method of melt-spinning.
本文利用聚合物共混界面相分离原理,结合添加剂洗出成孔,以PU为共混基质、PVDF为分散相、PEG为添加剂,采用熔体纺丝技术,制备得PU/PVDF中空纤维膜;在此基础上,适当添加稀释剂,以PU为共混基质,以CaCO_3无机粒子为分散相,以PEG为添加剂,经较低的纺丝温度制得PU/CaCO_3中空纤维膜。
补充资料：半熔体纺丝
分子式：
分子量：
CAS号：
性质：见凝胶纺丝法。
分子量：
CAS号：
性质：见凝胶纺丝法。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条