1) industrial gear oil
工业齿轮油
1.
Study on Friction Property of Special Industrial Gear Oil;
特种工业齿轮油的摩擦学性能研究
2.
The results indicated that medium or heavy load industrial gear oils prepared with KH150BS hydrotreated oil have good anti-emulsification property and receptivity to extreme-pressure anti-wear additive.
结果表明:用KH150BS加氢油调制中、重负荷工业齿轮油具有抗乳化性好、对极压抗磨添加剂的感受性好等优点,经过滤后,其清洁度可达到NAS 6级。
3.
Effects of different additives such as sulfurized olefin,mixtures of amine phosphates,ester thiophosphates,N-containing agents and ashless rust-resistant agents on the emulsion stability,EP/AW properties and rust-resistance of industrial gear oil were studied.
研究了硫化烯烃、磷酸酯胺盐、硫磷酸酯极压抗磨剂,含氮杂环衍生物多功能添加剂和防锈剂等,对工业齿轮油抗乳化性能、极压抗磨性能、防锈性能的影响;以及硫化烯烃、磷酸酯盐极压抗磨剂与含氮杂环衍生物多功能添加剂之间的协和效应。
2) heavy-load industrial gear oil
重负荷工业齿轮油
1.
The heavy-load industrial gear oil with excellent capabilities of EP/AW,oxidation stability,anti-rust & anti-corrosion,anti-emulsification,anti-foam was prepared by blending a mass of synthetic oil,partial solvent refining oil and a small quantity of S-P complex additives as well as other function additives.
以合成油为主要组分油,混兑部分溶剂精制油,选用性能优良的硫磷型复合添加剂及其他功能添加剂,研制出具有优良的极压抗磨性、氧化安定性、防锈防腐性、抗乳化性、抗泡性半合成型重负荷工业齿轮油。
3) middle-duty industrial gear oil
中负荷工业齿轮油
1.
The preparation and application of RHY4022 additive package for middle-duty industrial gear oils were studied at laboratory.
实验室进行RHY4022中负荷工业齿轮油复合剂的调配工艺研究和应用研究,结果表明使用硫化烯烃、硫磷氮化合物、LAN312、硫化脂肪酰胺等添加剂调配的RHY4022中负荷工业齿轮油,以1。
4) N100 EP industory gear oil
N100极压工业齿轮油
5) gear oil
齿轮油
1.
Application of complex additive in super industrial gear oil;
复合添加剂在超级工业齿轮油中的应用
2.
The wear and friction properties of nanoparticles added to gear oils were compared.
研究了纳米Cu、纳米TiO2和纳米LaF3润滑油添加剂在85W/90基础油中的油溶性,比较了三种纳米润滑油添加剂在齿轮油中的应用效果,结果表明:纳米铜添加剂能够显著提高基础油的极压性能,同时具有良好的抗磨性能。
3.
According to the research and investigation for cement production equipments,such as cement rotary kiln and all kinds of deceleration machines,which being widely used in domestic large and medium cement manufactories,KG series heavy-duty industrial gear oil,KG/S synthetic gear oil,open gear oil,DW oil and No.
通过对国内大、中型水泥企业的生产设备运行情况进行研究后,根据研究调查结果,就水泥企业回转窑、各类减速机等大型设备,有针对性地进行了昆仑KG系列重负荷工业齿轮油、KG/S合成齿轮油、开式齿轮油、大瓦油、1000号重负荷工业齿轮油的开发和实际使用,通过现场应用表明昆仑特种工业齿轮油对水泥企业重点设备有着良好的润滑保障效果。
6) gear oil pump
齿轮油泵
1.
The three-dimensional dynamic simulation of gear oil pump based on virtual design;
基于虚拟设计的齿轮油泵三维动态仿真
2.
The struture feature of the circle arc cycloidal gear oil pump is described.
分析了圆弧摆线齿轮油泵的结构特点 ,提出了以体积最小为目标函数的优化设计方法 ,研制出了该齿轮油泵的齿廓曲线参数优化设计软件包。
3.
Based on the theory analysis,the reason was discovered of oil- blocking during the operation of a gear oil pump,which resulted in power loss,vibration and noise.
通过分析 ,找出了齿轮油泵在运转过程中造成困油容积而形成功率损失、振动和噪声的原因 ,为设计和维修齿轮油泵提供了消除困油现象的方法和结构措施。
补充资料：齿轮油
| 齿轮油 gear oil 以石油润滑油基础油或合成润滑油为主，加入极压抗磨剂和油性剂调制而成的一种重要的润滑油。用于各种齿轮传动装置，以防止齿面磨损、擦伤、烧结等，延长其使用寿命，提高传递功率效率。齿轮油应具有良好的抗磨、耐负荷性能和合适的粘度。此外，还应具有良好的热氧化安定性、抗泡性、水分离性能和防锈性能。由于齿轮负荷一般都在490兆帕（MPa)以上，而双曲线齿面负荷更高达2942MPa，为防止油膜破裂造成齿面磨损和擦伤，在齿轮油中常加入极压抗磨剂，普遍采用硫- 磷或硫-磷-氮型添加剂。 |
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条