1) Dg75 Throttle Valve
Dg75闸阀
2) gate valve
闸阀
1.
Study on leakage reasons of gate valve in ammonium phosphate solution;
磷酸铵溶液中闸阀泄漏问题的研究
2.
Strength analysis and structural optimization of large-calibred gate valve body;
大口径闸阀阀体强度分析与结构优化
3.
Spray welding techology for sealing surface of gate valve on gas production wellhead;
采气闸阀密封面喷焊工艺及性能
3) valve
[英][vælv] [美][vælv]
闸阀
1.
Finite Element Analysis of PFFA35/65C88 Valve of Well Head;
井口装置PFFA35/65-C88闸阀的有限元分析
2.
1 master control valve in the Christmas tree of a high-pressure gas well leaks or cannot be switched on/off, the normal production and maintenance of the gas well will be affected and potential safety hazards may occur, which severely endangers the safety of gas production.
高压气井采气井口的1号主控闸阀若产生泄漏、开关不动等问题,将影响气井的正常生产和维护保养,并存在安全隐患,这给气井的安全生产带来了严重危害。
4) Sluice valve
闸阀
1.
Numerical simulation of vibration performance for nuclear safety-related parallel sluice valve;
核岛双闸板闸阀振动特性的数值模拟
2.
For the nuclear safety-related parallel sluice valve,vibration performance computation and analysis is obligatory during its safety evaluation.
同时,以PZ62Y-50/150型核岛平行式双闸板闸阀为例,讨论了采用三维有限元分析软件进行核安全级阀门振动特性分析的基本思想和过程。
5) sluice
[英][slu:s] [美][slus]
水闸闸阀
6) sluice
[英][slu:s] [美][slus]
闸阀闸门
补充资料：闸阀标准汇总
标准编号 | 标准中文名称 | 标准英文名称 |
DL/T531-1994(2005复审) | 电站高温高压截止阀、闸阀技术条件 | |
GB/T12234-1989 | 通用阀门法兰和对焊连接钢制闸阀 | General purpose industrial valves—Flanged and butt-weld steel gate valves |
JB/T5298-1991 | 管线用钢制平板闸阀 | |
JB/T8691-1998 | 对夹式刀形闸阀 | |
JB/T2001.28-1999 | 水系统 手动闸阀(PN=20MPa) | |
JB/T2001.26-1999 | 水系统 手动闸阀芯(PN=20、31.5MPa) | |
JB/T2001.30-1999 | 水系统 液压闸阀(PN=31.5MPa) | |
JB/T2001.27-1999 | 水系统 手动闸阀(PN=31.5MPa) | |
JB/T2001.31-1999 | 水系统 液压闸阀(PN=20MPa) | |
JB/T2001.49-1999 | 水系统 泵站用气闸阀(PN=20MPa) | |
JB/T2001.29-1999 | 水系统 液压闸阀芯(PN=20、31.5MPa) | |
JB/T2001.48-1999 | 水系统 泵站用气闸阀(PN=31.5MPa) | |
JB/T2001.47-1999 | 水系统 泵站用气闸阀芯(PN=20、31.5MPa) | |
JB/T5211-1991(2005复审) | 闸阀阀座 | |
JB/T53200-1999 | 对夹式刀形闸阀 产品质量分等 | |
JB/T53162-1999 | 闸阀 产品质量分等 | |
JB/T53242-1999 | 管线用钢制平板闸阀 产品质量分等 | |
NF E29-334-2003 | 工业用阀门.铜合金闸阀 | (Industrial valves - Copper alloy gate valves.) |
NF E29-383-1981 | 工业阀门.闸阀.旁路装置 | (Industrial valves. Gate valve. By-pass.) |
NF E29-332-2003 | 工业用阀.铸铁闸阀 | (Industrial valves - Cast iron gate valves.) |
NF E29-335-2003 | 石油和天然气工业用尺寸为DN 100及更小的钢闸阀、球阀和止回阀 | (Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries.) |
ANSI/AWWA C 509-2001 | 给水用弹性带座闸阀 | (Resilient-Seated Gate Valves for Water Supply Service) |
BS EN 12288-2003 | 工业用阀.铜合金闸阀 | (Industrial valves - Copper alloy gate valves) |
BS EN ISO 15761-2003 | 石油和天然气工业用尺寸为DN 100及更小的钢闸阀、球阀和止回阀 | (Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries) |
BS EN 1171-2002 | 工业阀门.铸铁闸阀 | (Industrial valves - Cast iron gate valves) |
prEN ISO 16139-2000 | 工业用阀门 热塑性材料制闸阀 | Industrial valves - Gate valves for thermoplastic materials (ISO/DIS 16139:2000) |
EN 12288-2003 | 工业用阀 铜合金闸阀 | Industrial valves - Copper alloy gate valves |
EN ISO 15761-2002 | 石油及天然气工业用DN100及较小的钢闸阀 、球阀和防逆阀 | Steel gate, glob and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries (ISO 15761:2002) |
prEN ISO 10434-2002 | 石油和天然气工业用螺栓帽状钢闸阀 | Bolted bonnet steel gate valves for petroleum and natural gas industries (ISO/DIS 10434:2002) |
BS 5163-1986 | 水厂用双法兰铸铁楔形闸阀规范 | (Specification for predominantly key-operated cast iron gate valves for waterworks purposes) |
BS 5433-1976 | 供水用地下闸阀规范 | (Specification for underground stopvalves for water services) |
BS 1414-1975 | 石油、石化和类似工业用钢楔式闸阀(带法兰和对焊端)规范 | (Specification for steel wedge gate valves (flanged and butt-welding ends) for the petroleum, petrochemical and allied industries) |
DIN 11832-1-1990 | 农场和牲畜饲养设备.输送液态粪肥的管道用阀门管件.最大到1巴的静压力闸阀 | (Farm and livestock husbandry equipment; shut-off valves for slurry pipes; gate valves for static pressure of max. 1 bar) |
DIN 42568-1982 | 变压器.取油样和放油用公称内径15和32的闸阀 | (Transformers; outlet valve DN 15 and DN 32 for sampling and discharge) |
DIN 86500-1968 | 船用螺纹连接的截止阀和闸阀等概述 | (Valves and Gate Valves with Screwed Connections; Survey of Types for Shipbuilding) |
DIN EN 1171-2003 | 工业用阀.铸铁闸阀 | (Industrial valves - Cast iron gate valves; German version EN 1171:2002) |
DIN 86259-2000 | 船只及造船技术.超轻型法兰闸阀DN32-DN125(PN10) | (Ships and marine technology - Flanged gate valves extra light duty DN 32 to DN 125, PN 10) |
DIN EN ISO 15761-2003 | 石油和天然气工业用规格为DN100及更小的钢闸阀、球阀和止回阀 | (Steel gate, glob and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries (ISO 15761:2002); German version EN ISO 15761:2002 (German and English text)) |
JB/T8858-2004 | 闸阀 静压寿命试验规程 | |
UL 262-2004 | 防火用闸阀 | (Gate valves for fire-protection service ) |
JIS F3019-1996 | 自闭闸阀式短测深管头 | (Self-closing gate valve heads for short sounding pipe) |
JIS F7369-1996 | 造船.铸铁16K闸阀 | (Shipbuilding -- Cast iron 16K gate valves) |
JIS F7363-1996 | 造船.铸铁5K闸阀 | (Shipbuilding -- Cast iron 5K gate valves) |
JIS B2062-1994 | 水管用闸阀 | (Sluice valves for water works) |
JIS F7367-1996 | 造船.青铜5K提杆式闸阀 | (Shipbuilding -- Bronze 5K rising stem type gate valves) |
JIS F7364-1996 | 造船.铸铁10K闸阀 | (Shipbuilding -- Cast iron 10K gate valves) |
JIS F7368-1996 | 造船.青铜10K提杆式闸阀 | (Shipbuilding -- Bronze 10K rising stem type gate valves) |
JIS F7360-1996 | 造船.船体铸钢闸阀 | (Shipbuilding -- Hull cast steel gate valves) |
JIS F7366-1996 | 造船.铸钢10K闸阀 | (Shipbuilding -- Cast steel 10K gate valves) |
ISO 15761-2002 | 石油和天然气工业用尺寸为DN 100及更小的钢闸阀、球阀和止回阀 | (Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries) |
ISO 10434-1998 | 石油和天然气工业用螺栓帽状钢闸阀 | (Bolted bonnet steel gate valves for petroleum and natural gas industries) |
ISO 5996-1984 | 铸铁闸阀 | (Cast iron gate valves) |
ISO 7259-1988 | 地下用的按钮操纵的铸铁闸阀 | (Predominantly key-operated cast iron gate valves for underground use) |
GB/T12232-2005 | 通用阀门 法兰连接铁制闸阀 |
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条