1) pure torque
纯扭矩
1.
It still exists the problems of low precision,big error and impure torque in calibration of the precise sensor.
针对现有精密小扭矩传感器扭矩标定中存在的精度低、误差大、所加载的扭矩非纯扭矩等问题,研制出可以加载纯扭矩的加载器(加载范围为0~16。
2) calculation of cutting torque
纯切削扭矩推导计算
3) Pure torsion
纯扭
1.
Experimental research on the reinforced steel fiber high-strength concrete pure torsional thin-walled box girder;
配筋钢纤维高强混凝土薄壁箱梁纯扭试验研究
2.
On the basis of the research of finite element theory,including the method of building model and the stress-strain relations of materials of prestressed concrete in pure torsion.
在对预应力混凝土受扭构件材料的本构关系和建模方法等有限元分析理论的研究基础上,利用ANSYS有限元程序对三根不同条件下的预应力混凝土纯扭梁进行了全过程非线性分析,有限元分析的结果表明,配置与纵轴有夹角的折线式螺旋形预应力钢筋可以在不增加预应力钢筋截面积的情况下,更加有效地提高预应力混凝土构件的抗扭强度。
3.
In order to study the torsional behavior of composite steelconcrete beams,experiments were conducted on four specimens with varied stirrup ratios subjected to pure torsion.
为了研究钢-混凝土组合梁的抗扭性能,完成了4根不同配箍率的组合梁纯扭试验,借助结构分析软件,采用三维8结点实体单元的有限元模型,对组合梁纯扭试件在弹性阶段的变形、截面应力分布情况进行了分析。
4) torsion
[英]['tɔ:ʃn] [美]['tɔrʃən]
纯扭
1.
FEM analysis that took into consideration the interaction between the reinforcement and concrete and that between the steel and concrete simulated the behavior of the damage and torsion well of composite beams and reinforced Concrete beam.
基于5根新型外包钢-T形截面混凝土组合梁受纯扭作用的试验成果,采用ANYSY参数化程序设计语言(APDL)编制了命令流,对纯扭作用下组合梁的受扭性能进行了非线性有限元分析(FEM)。
2.
In torsion members made of normal concrete or high strength concrete, if reinforcementratio is too lower, the bars will yield and enter the stage of strain hardening, as soon as the concretecracking, that will lead to a brittle failure, that is dangerous in engineering structures.
在钢筋混凝土和高强混凝土纯扭构件中，如果配筋量过少，混凝土一开裂立即卸载给钢筋，使钢筋屈服而且进入强化阶段，产生少筋破坏。
3.
in pure torsion members with high strength concrete and over reinforcement, the bars willnot yeld, the surplus bar will be extravagant.
在钢筋混凝土和高强混凝土超配筋纯扭构件中，由于配筋量过高使钢筋不能屈服，引起钢筋用量过多而产生材料的浪费。
5) torque
[英][tɔ:k] [美][tɔrk]
扭矩
1.
Influence of Twin-screw Extruder Screw Element Type on the Torque and Pressures during Extrusion;
双螺杆挤压机螺杆元件类型对扭矩和压力的影响
2.
The design of the explosion-proof torque recorder based on snap-in chip;
基于嵌入式芯片的防爆扭矩记录仪的设计
3.
New model for forecasting drag and torque in Extended Reach Well.;
大位移井摩阻/扭矩预测计算新模型
6) torque moment
扭矩
1.
Analysis of torque moment in friction stir welding;
搅拌摩擦焊中的扭矩分析
2.
Tests of measuring torque moment verified that circuits with four strain gauges could get rid of the influence exerted by the bending moment.
介绍了三种测应变的线路,通过实验证实,在测扭矩时,用4片电阻应变片构成的线路,可以排除弯矩的影响。
3.
It is a widely existent phenomenon that the working torque moment of theConform machine main shaft undulates periodically.
CONFORM机主轴工作扭矩周期性波动是一种普遍存在的现象。
补充资料：纯纯
1.诚挚貌。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条