1) loading rate
加载率
1.
Results show that,with loading rates increasing,the relative bulk of hole lessens and the boundary pressure of the hole increases.
得到在载荷作用下孔隙边界的压力变化;随着加载率的增大,同一时刻,孔隙相对体积变小;当加至最大载荷,再持续施加恒载荷,孔隙的边界压力和相对体积变化非常缓慢;研究了在载荷作用下孔隙的形变过程。
2.
The result shows that the dynamic fracture toughness is affected by both the loading rate and the specimen size.
测试结果表明,岩石的动态断裂韧度同时受到加载率效应和尺寸效应的影响。
2) loading rate
加载速率
1.
Molecular-dynamics simulation of influence of loading rate and defects on crack growth;
加载速率和点缺陷对裂纹扩展影响的原子级模拟
2.
Effect of loading rate on fracture toughn ess of a ship-building steel;
加载速率对船用钢断裂韧性的影响
3.
Influence of loading rate on stress and strain distribution a notchs in front of in notched specimen;
加载速率对缺口前应力、应变分布的影响
3) loading rates
加载速率
1.
Experimental analysis on mechanical effects of loading rates on limestone;
加载速率对石灰岩力学效应的试验研究
2.
Both stress-strain relation curve and rupture condition of the rubber were attained under different temperatures and different loading rates.
得到了不同温度和不同加载速率条件下材料的应力-应变关系曲线和材料的破坏条件,由此分析了高温和低温的温度变化条件及加载速率对材料力学性能的影响,得出天然橡胶材料在大变形条件下的温度和加载速率敏感特性。
3.
The compressive tests of 63 concrete specimens under four lateral stress levels and four loading rates were completed using the static-dynamic triaxial test system for concrete in Dalian University of Technology.
本文利用大连理工大学的大型混凝土静、动三轴试验系统，完成了4种侧应力等级和4个数量级加载速率的混凝土受压试验试件共63个。
4) Loading velocity
加载速率
1.
Study on the best loading velocity in small punch test for P91 steel;
P91钢微型杯突试验法最佳加载速率的研究
2.
The linearity of the pressure-resistivity regressive curve was improved when loading velocity has been increased from 0.
主要讨论了不同轴向加载速率对复合体系电阻机械效应的影响。
5) loading speed
加载速率
1.
The effects of different factors,such as the loading direction,the size,the loading speed,the water content and geometry shape,on the chestnut shelled force were investigated in this manuscript.
用准静态压缩试验,对影响板栗破壳力的不同因素——加载方向、板栗大小、加载速率、板栗含水率以及板栗的几何形状进行了分析。
2.
Objective:To investigate the effects of varied loading speeds in three-point bending experiments using rat femoral samples.
目的:探讨在大鼠股骨标本的3点弯曲实验中,加载速率变化对实验结果的影响。
3.
Loading speed is a key factor affecting the fracture splitting quality,and proper loading speed can increase the brittleness of material.
加载速率是影响裂解质量的重要因素,合理的加载速率可以提高材料的脆性。
6) loading frequency
加载频率
1.
Experiments on strain pseudoelastic property of shape memory alloy(SMA) were carried out and the Influence of temperature,cyclic number and loading frequency on pseudoelastic property of SMA were investigated.
对形状记忆合金(Shape Memory Alloy,简称SMA)的超弹性特性进行了试验研究,得到了SMA的超弹性特性随环境温度、循环加载圈数以及加载频率等因素的变化规律,为进一步开发SMA被动阻尼器奠定了基础。
2.
The frequency of strain burst, the amplitude of strain bursts, B, and the shear stress drop, D, were discussed in terms of the applied strain amplitude and cyclic loading frequency.
研究了应变幅和加载频率对［123］Cu－16％Al单晶在循环形变中的应变突发行为的影响。
3.
Fatigue crack growth behavior of DZ17G at room temperature is studied at different testing conditions of loading direction and loading frequency.
研究了定向凝固高温合金ＤＺ１７Ｇ在不同加载取向及加载频率条件下的室温疲劳裂纹扩展行为。
补充资料：自动加载下载的*.dmt材质方法
自动加载下载的*.dmt材质方法一
1、建立如下路径的文件夹：
E:\graphiclib\graphic-library\
然后把你下载的adv_materials文件夹（里面材质了）放到刚才建立的路径里，变成如下路径
E:\graphiclib\graphic-library\adv_materials
2、如图配制搜索路径
3、这样调用！点PHOTOLUX材质库
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条