1) shielding gas
保护气体
1.
Effects of shielding gas in CO_2 laser-MAG hybrid welding;
CO_2激光-MAG电弧复合焊接保护气体的影响规律
2.
Effects of different shielding gases on slag detachability of type 347L flux-cored wire for stainless steels containing Nb;
保护气体对含铌不锈钢药芯焊丝347L脱渣性的影响
3.
A detailed experiment of CO_2 laser-TIG hybrid welding with different shielding gas methods is carried out on the 316L stainless steel plate.
保护气体组成及其保护方式是决定CO2激光-钨极氩弧焊(TIG)电弧复合焊接工艺稳定性和激光、电弧两种热源能否有效耦合并取得增强的焊接熔深的关键原因。
2) protective gas
保护气体
1.
The results show that HFC134a is suitable to be the protective gas of magnesium alloys and N_2 is a good carrier gas f.
研究结果表明,HFC134a适合充当镁合金在密封熔炼炉中保护气体,氮气是一种好的载气。
2.
Technology development of ribbon steels hot galvanizing were introduced,and then stress on its protective gas were reviewed and discussed.
介绍了带钢热镀锌技术的发展,同时对其保护气体的技术作了重点的阐述。
3.
In this paper, the advancement of computer simulation in glass ribbon, protective gas and molte.
本文就计算机模拟技术在玻璃带模拟、保护气体模拟、锡液流动模拟等方面的应用进展进行综述,并对其今后的发展进行了展望。
3) shield gas
保护气体
1.
This paper describes the shield gas required by MAG High Performance welding.
介绍了高速 MAG焊所要求的保护气体 ,采用这种保护气体可使电弧稳定 ,提高焊接质量并降低成本。
4) Gas Protection
气体保护
1.
Based on the analysis of technology specialties and requirement, a set of melting and holding system for magnesium diecasting has been developed, and the composition, working principle and characteristics of its mechanical structure, gas protection, temperature control subsystem and human interface subsystem are described.
在分析镁合金压铸机配套用熔化保温系统工作特点的基础上,自主设计开发并制造了镁合金熔化保温系统,介绍了该系统中机械结构、气体保护、温度控制以及人机界面等子系统的组成、工作原理和特点。
2.
A gas protection seal for powder was designed to solve the problem that powder into seal makes seal surface wore,which results in seal failure.
设计的一种气体保护填料迷宫组合密封结构可以解决粉体介质密封因粉体颗粒进入密封装置引起密封表面磨损导致密封失效问题。
3.
The gas protection method is relatively better o.
在现有的各种阻燃方法中气体保护法相对较好,而在其中效果最好的是SF_6混合气体保护法。
5) gas shielded arc welding
气体保护焊
1.
To reveal the influence of forced convection on gas shielded arc welding temperature field,the infrared camera was used to investigate the temperature field of the base metal in CO2 arc welding.
为了研究强制对流对气体保护焊温度场的影响,通过红外热像仪检测了CO2气体保护焊的温度场,发现在熔池及其邻近区域温度呈圆锥型分布。
2.
According to the welding technological requirement of West-to-East Gas Transportation Project,an experimental research was performed in this paper on gas shielded arc welding of 10.
3mm X70管线钢进行了气体保护焊试验。
6) gas metal arc welding
气体保护焊
1.
Development of gas metal arc welding wire for X80 pipeline steel;
X80管线钢气体保护焊用焊丝的研制
2.
Modeling and analysis of droplet forming in gas metal arc welding short circuiting transfer;
气体保护焊短路过渡熔滴成形的建模分析
3.
A novel digital waveform control scheme for CO_2 gas metal arc welding
CO_2气体保护焊的新型全数字化波形控制技术
补充资料:保护气体
分子式:
CAS号:
性质:是电子用特种气体中的一类。高纯Ar,He,H2常用作晶体生长时的保护气体。其他工业如化学工业和金属加工所用的惰性保护气体纯度上要求可低些。
CAS号:
性质:是电子用特种气体中的一类。高纯Ar,He,H2常用作晶体生长时的保护气体。其他工业如化学工业和金属加工所用的惰性保护气体纯度上要求可低些。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条