1) spherical activated carbon
球状活性炭
1.
Effect of preparing process on structure and property of spherical activated carbon;
制备工艺对球状活性炭结构与性能的影响
2.
Study on adsorptive properties of spherical activated carbon on several kinds of active ingredient from Chinese materia medica;
球状活性炭对几类中药有效成分的吸附性能研究
3.
The catalytic performance of pitch based spherical activated carbon with different specific surface area was investigated for the removal of SO 2 at room temperature,using a simulated flue gas.
研究了不同比表面积的沥青基球状活性炭（ＰＳＡＣ）在Ｏ２和Ｈ２Ｏ存在下脱除ＳＯ２的能力。
2) spherical active carbon
球状活性炭
1.
Study on preparation of spherical active carbon as adsorbent of traditional Chinese medicine;
中药球状活性炭吸附剂的制备
3) spherical activated carbon fiber
球状活性炭纤维
4) pitch-based spherical activated carbon
沥青基球状活性炭
1.
Adsorption performance study of pitch-based spherical activated carbon for several zymo-moleculars
沥青基球状活性炭对若干酶类分子的吸附性能研究
2.
In this study,the adsorption properties to creatinine and VB 12 of pitch-based spherical activated carbon with different pore structures were investigated.
主要研究了 3种具有不同孔结构的沥青基球状活性炭对肌酐及VB12 的吸附性能 ,并与BET比表面积及孔结构进行了关联。
3.
A highly effective desulphurization agent(PSAC-I) was prepared by impregnating sodium carbonate on pitch-based spherical activated carbon(PSAC).
将沥青基球状活性炭(PSAC)浸渍一定浓度的Na2CO3,制备了一种高性能脱硫剂(PSAC-I)。
5) Study of Spherical Active Carbon
球状活性炭的研制
6) spherical activated carbon
球形活性炭
1.
Influence of transition metals on the pore structure and adsorption properties of spherical activated carbon;
过渡族金属对球形活性炭孔结构与吸附性能的影响
2.
Petroleum pitch-based spherical activated carbon (PSAC) , being used in ventilate antigas clothing, was prepared in experimental condition.
在实验室条件下研制了透气防毒服用石油沥青基球形活性炭(PSAC),采用扫描电子显微镜(SEM)对其形貌进行了观察,通过BET测定对PSAC的孔结构进行了表征,同时以苯和四氯化碳为吸附质研究了PSAC静态吸附性能,并与普通粒状活性炭(GAC)进行对比,比较了PSAC和GAC的二次吸、脱附性能。
3.
Morphology and pore structure of petroleum pitch-based spherical activated carbon(PSAC)were studied respectively by SEM and BET.
采用扫描电子显微镜(SEM)对实验室自制的石油沥青基球形活性炭(PSAC)的形貌进行了观察,通过BET测定对PSAC的孔结构进行了表征,并探讨了PSAC孔的形成机理。
补充资料：球状活性炭纤维
分子式：
CAS号：
性质：指活性炭纤维的球形块状物。吸附能力高，吸脱附速度快，处理性和形状保持性优良，流体通过的阻力极低。制法是将软化点约230℃的精制沥青熔纺后在300℃空气中不熔化，切成长度约0.6mm后用粉碎机碎成粉状，在水悬浮液中用平均粒长为8μm、软化点为94℃的沥青黏合剂，制成平均粒径约3.1mm的球状碳纤维，用33%水蒸气在900℃活化，制得比表面积为1500m2/g的产品。用途与普通沥青系活性炭纤维相仿。
CAS号：
性质：指活性炭纤维的球形块状物。吸附能力高，吸脱附速度快，处理性和形状保持性优良，流体通过的阻力极低。制法是将软化点约230℃的精制沥青熔纺后在300℃空气中不熔化，切成长度约0.6mm后用粉碎机碎成粉状，在水悬浮液中用平均粒长为8μm、软化点为94℃的沥青黏合剂，制成平均粒径约3.1mm的球状碳纤维，用33%水蒸气在900℃活化，制得比表面积为1500m2/g的产品。用途与普通沥青系活性炭纤维相仿。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条