1) delamination
[英][di:,læmi'neiʃən] [美][di,læmə'neʃən]
脱层
1.
Testing Study for Buckling of Composite Cylindrical Shell with Delaminations;
脱层复合材料圆柱壳屈曲的实验研究
2.
Buckling and initial post-buckling of delamination bridged by nonlinear fibers in 3D composites;
3D复合材料中非线性纤维搭桥下脱层的屈曲和初始后屈曲
3.
Effects of fiber bridge on delamination buckling in 3D composites;
3D复合材料纤维搭桥对椭圆脱层屈曲的影响
2) delaminating
[英][di:'læməneit] [美][di'læmə,net]
脱层
1.
The bimetal cementation,the compound material and the metal cementation,the compound material and the compound material cementation three types of lamination boards delaminates on its natural frequency had been separately studied and delaminating with the natural frequency relations diagram of curves had been drawn up.
用有限元软件MARC建立了具有脱层和无脱层的两端固支层合板模型,并进行了模态分析。
3) delamination
[英][di:,læmi'neiʃən] [美][di,læmə'neʃən]
分层，脱层
4) Decarburized Layer
脱碳层
1.
Decarburized layer appears in the two sides of the crack.
裂纹两侧出现了一定宽度的脱碳层,脱碳层内部出现了二次氧化产物。
2.
In order to require of the decarburized layer depth of T11A～T13A carbon tool steel wire rod up to the GB/T1298-1986 standard,the correspond heating processes for roughing soaking pit,pusher-type furnace for structural steel and rail and step-by-step furnace for wire were established based on the feature of T11A～T13A carbon tool and process technology in Pan Steel Co.
为使攀钢T11A～T13A碳素工具钢盘条的脱碳层深度满足GB/T12 98 1986标准的要求 ,根据T11A～T13A碳素工具钢的特点及攀钢的生产工艺 ,对初轧均热坑、轨梁推钢式加热炉及线材的步进式加热炉制定了相应的加热工艺 ,生产出的T11A～T13A碳素工具钢盘条的脱碳层全部满足GB/T12 98 1986标准的要求。
3.
A new method for characterization of softening in a decarburized layer is proposed.
提出一种表征脱碳层软化的新方法，该方法借助Ｘ射线应力分析技术测量屈服强度在脱碳层深度方向上的分布。
5) release layer
脱模层
1.
A resin lamina of glue "502" with ethyl a-cyanoacrylate was first coated on the flat slide of glass substrates as release layer.
先在玻璃基片上涂覆一层α-氰基丙烯酸乙酯为主体的"502胶"作为脱模层,再以溶胶-凝胶涂膜法在其表面涂覆TiO_2薄膜,经丙酮浸泡溶解脱模层后得到片状粉末。
6) Zinc Scaling
锌层脱落
补充资料：脱层
分子式：
CAS号：
性质：层压制品中,胶黏剂、被粘物或它们之间的界面发生破坏,产生层间分离的现象。
CAS号：
性质：层压制品中,胶黏剂、被粘物或它们之间的界面发生破坏,产生层间分离的现象。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条