1) pore-expanding agent
扩孔剂
1.
Special-shaped extrusions were prepared using commercial high and lowsilicon large-pore pseudoboehmite as the raw material,pore-expanding agents, lubricating agents,and acid or organic substance as the adhesive.
利用工业高硅、低硅大孔拟薄水铝石为骨料,添加扩孔剂和助挤剂,分别以酸和有机物为胶粘剂,将干胶粉混捏后挤条成形。
2.
BET was used to study the influence of pore-expanding agents(polyethylene glycal with different molecular on properties of β-zeolite.
采用BET法研究了不同聚合度的聚乙二醇(PEG)扩孔剂对沸石性能的影响,并通过苯与丙烯的烷基化反应对扩孔后的催化剂进行了活性测试。
2) swelling agent
扩孔剂
1.
MCM-41 was synthesized using the ionic liquid as novel template,TEOS as silica source,and the effect of swelling agents,including decane,1,3,5-tri-methybenzene(TMB),the mixture of decane and TMB under the ratio of 1.
以离子液体为模板剂,正硅酸乙酯为硅源,研究了扩孔剂三甲苯,癸烷,以及三甲苯与癸烷1∶1的混合物对介孔分子筛MCM-41结构的影响,采用XRD以及氮吸附-脱附分析技术对合成的介孔分子筛MCM-41进行了表征。
3) pore creating method
扩孔剂法
1.
This paper investigated the pore creating method to increase the NaY content in the in situ crystallized microspheres.
对扩孔剂法提高原位晶化微球的NaY分子筛含量进行了研究。
4) Amine solution reaming type catalyst
胺水扩孔型催化剂
5) reaming
[英][ri:m] [美][rim]
扩孔
1.
Water jet soil reaming technology and its influencing factors;
水射流土层扩孔技术及影响因素
2.
Dynamic hip screw triple reaming for clearence of femoral head and neck cystic lesion
动力髋螺钉三联绞刀大转子下扩孔病灶清除植骨治疗股骨头颈部囊性变1例
3.
Research and improvement of complexity treatment techniques for sidetracked hole reaming
侧钻井扩孔复杂情况处理技术探讨与完善
6) cavity expansion
扩孔
1.
Analytical solution to cavity expansion in strain-softening soils with Tesca yield criterion and its applications;
应变软化Tresca材料中扩孔问题解答及其应用
2.
In order to analyze the mechanical mechanism of fracture grouting during the early phase by using the theory of large-deformation and plastic mechanics,the early phase of fracture grouting is regarded as the question of cavity expansion in infinite soil.
根据应力平衡方程以及应力和应变连续的边界条件,推导出劈裂灌浆初始阶段的最终扩孔压力和最终扩孔半径的理论解答。
3.
In order to analyze the mechanical mechanism of compression grouting and give the analytical solution of the ultimate grouting pressure,the process of compaction grouting is considered as the question of cavity expansion in infinite soil mass.
为了能够从能量的角度分析压密注浆的力学机理,并给出注浆压力的理论解,将整个注浆过程视为无限土体中的圆孔扩张问题,根据注浆过程中能耗区土体在注浆压力和静止土压力作用下的应力、应变和体变关系以及注浆扩孔过程中的能量和体变守恒原理,推导出压密注浆极限注浆压力的理论解答。
补充资料：钻孔（扩孔与铰孔）
各种零件的孔加工，除去一部分由车、镗、铣等机床完成外，很大一部分是由钳工利用钻床和钻孔工具（钻头、扩孔钻、铰刀等）完成的。钳工加工孔的方法一般指钻孔、扩孔和铰孔。
用钻头在实体材料上加工孔叫钻孔。在钻床上钻孔时，一般情况下，钻头应同时完成两个运动；主运动，即钻头绕轴线的旋转运动（切削运动）；辅助运动，即钻头沿着轴线方向对着工件的直线运动（进给运动），钻孔时，主要由于钻头结构上存在的缺点，影响加工质量，加工精度一般在IT10级以下，表面粗糙度为Ra12.5μm左右、属粗加工。
一、钻床
常用的钻床有台式钻床、立式钻床和摇臂钻床三种，手电钻也是常用的钻孔工具。
1.台式钻床
简称台钻，是一种在工作台上作用的小型钻床，其钻孔直径一般在13mm以下。
台钻型号示例：Z 4 0 1 2
主 参 数：最大钻孔直径
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条