1) spreader
[英]['spredə] [美]['sprɛdɚ]
吊具
1.
Analysis of collision between spreader and container in quayside container crane training simulator system;
岸边集装箱桥式起重机仿真训练器吊具碰撞分析
2.
The cause of the accident of a container spreader clipping in the cabin when the quayside container crane is working is analyzed in this paper.
分析岸桥在装卸作业过程中出现吊具卡槽滞舱事故的原因,在此基础上提出相应的预防思路及其应急处理方法。
2) hanger
[英]['hæŋə(r)] [美]['hæŋɚ]
吊具
1.
Dynamic Simulation of Hanger of H Section Steel in ADAMS;
基于ADAMS的H型钢吊具的动力学仿真
2.
This paper analyzes on the possibility of adopting the anchor line suspended monorail hoist runway, and designs and develops the hanger of the anchor line suspended monorail hoist runway, which solves the problem of the erection of the monorail hoist runway in the transportation adopting the monorail hoist in the ground coal road stage with the total bolt support.
分析了用锚索悬吊单轨吊道的可行性,设计并制作了用锚索悬吊单轨吊道的吊具,解决了全锚支护底煤巷顺槽采用单轨吊进行运输时单轨吊道的安装问题。
3) Sling
[英][slɪŋ] [美][slɪŋ]
吊具
1.
Manufacturing of sling for large electric furnace body;
大电炉炉壳吊具制作工艺
2.
Improvement of sling of structural component coating line;
结构件涂装线吊具的改进
3.
Parametric design and finite element analysis of special sling used in large equipment installation
大型设备专用吊具的参数化设计与有限元分析
4) lifting tool
吊具
1.
Combining with practice,it introduces such manufacturing process as arch rib connecting,dismounting bracket designing,lifting tool designing and integral lifting.
结合工程实践,阐述了拱肋合拢、可拆装支架设计、吊具设计、浮吊架设等施工技术,对今后类似工程的修建有一定的指导意义。
2.
The lifting tool is placed a very important role when a core is inserted into the frame during assembly of Ex motor.
针对原吊具存在的绕组与机座中心线易偏斜,加压后绕组绝缘易破坏,甚至使机座撑裂、失去防爆性能的缺点,介绍了一种用于中型防爆电机带绕组定子铁心内撑式吊具,有效地克服了轴线不易对中、键槽不易对正的缺陷。
5) slings for lifting loads
吊具
1.
Some problems about EQ1030 light truck slings for lifting loads in the painting production line are analysed in this paper.
分析了原东风EQ1030轻型卡车车身底漆线吊具存在的问题,介绍了新吊具设计思路和结构特点。
6) four point suspension spreader
四点吊吊具
补充资料：吊具
起重机械中吊取重物的装置。吊取成件物品最常用的吊具是吊钩，其他还有吊环、起重吸盘、夹钳和货叉(见图)等。起重吸盘、夹钳和货叉等可在起重机上作为专用吊具长久使用，也可作为可更换的辅助吊具挂在吊钩上临时使用，常用于多货种仓库和堆场，以提高作业效率。抓取散状物料的吊具一般为颚板可开闭的抓斗，也可用电磁吸盘吸取如金属切屑等导磁性物料。吊取流动性物料的吊具常用的有盛桶和吊罐、一般通过倾侧或抽底塞等方式卸出钢水或化学溶液，通过打开吊罐底门卸出混凝土等流动性物料。吊运集装箱也有专门的吊具（见跨车）。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条