1) nickel foil
镍箔
1.
The titanium alloy TA17 and stainless steel 0Cr18Ni9Ti were bonded by using impact pressuring diffusion bonding(IPDB) with pure nickel foil as an interlayer, and the tensile strength of bonding joint was tested.
采用纯镍箔作中间过渡层,在脉冲加压扩散连接工艺下,对TA17钛合金与0Cr18Ni9Ti不锈钢进行了连接试验,并测定了接头的拉伸强度。
2.
The process conditions in the electrodeposition of nickel foil were studied.
研究了电沉积法制取镍箔的实验条件,并对不同条件下得到的镍箔表面、断面SEM形貌以及抗拉强度进行了分析。
3.
The technology of industrial nickel foils production is researched in the present paper.
实践表明：工艺稳定，设备结构合理，产出的宽幅薄镍箔厚度均匀、纯度高、机械性能和表面性能良
2) comprehensive dehydrogenation
镍箔脱氢
3) Ni-B foil
镍硼箔膜
1.
In this paper, electroless technology had been used to coating Cu,Ni-B on the surface of plastic matrix first, and then to dissolve matrix plastics in solvent to get Ni-B foil.
本课题利用化学镀技术在塑料基体上镀铜、镀镍硼,然后将基体塑料溶解得到镍硼箔膜。
4) iron-nickel alloy foil
铁-镍合金箔
5) foil
[英][fɔɪl] [美][fɔɪl]
箔
1.
FE Simulation of Laser Micro Bending of Titanium Foil
钛箔材激光微弯曲成形过程有限元模拟
2.
Study on electrodeposition process of invar alloy foil in a fluoroborate electrolyte
氟硼酸盐体系电沉积因瓦合金箔的工艺研究
3.
Bright Ni-Fe soft-magnetic alloy foil was prepared from sulphate-chloride bath solution by electroplating.
在硫酸盐-氯化物溶液体系中采用电沉积法制得了光亮Ni-Fe软磁合金箔,研究了n(Ni2+)/n(Fe2+)摩尔比,电流密度,镀液pH,镀液温度对电沉积Ni-Fe合金箔的铁含量的影响规律,确定了最佳工艺条件。
6) Ni
镍
1.
Research on Jet Electrodepositing Ni Dendritic Crystal;
喷射电沉积镍枝晶基础工艺研究
2.
A Repid Graphit Furnace Atomic Absorption Spcetrometric Method for the Determination of Aluminum an Nie in Food;
石墨炉原子吸收法快速测定食品中铝和镍
3.
Determination of Co,Cr,Fe,Mn,Mo,Ni,Ti in PTA by DUO-ICP-AES;
DUO-ICP-AES测定精对苯二甲酸中的钴、铬、铁、锰、钼、镍、钛
补充资料：箔条干扰火箭(见箔条投放装置)
箔条干扰火箭(见箔条投放装置)
chaff jamming rocket
botiao gQnrao huolian箔条干扰火箭(eha拜Jamming:ocket)见箔条投放装置。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条