1) oil temperature
油温
1.
Reason and solution of excessive oil temperature in the sliding gate hydraulic system;
在线滑动水口液压站油温过高原因分析和处理
2.
Investigation of the influence between the oil temperature and hydraulic system;
基于液压油油温对液压系统性能影响的研究
3.
Radiation system design for tamping trucks via automatic hydraulic oil temperature control
捣固车液压油温度自动控制散热系统设计
2) oil return temperature
回油温度
1.
Defining the limit value of oil temperature and automatically controlling the oil return temperature are effective measures for reducing gas and energy consumption.
精确界定油井温度界限值,对回油温度进行自动控制是降低气耗、能耗的有效措施。
3) low-temperature light oil
低温轻油
5) high temperature reservoir
高温油藏
1.
A new profile/displacement control system adequate to high temperature reservoir is introduced.
介绍了一种应用于高温油藏调驱的新型调驱剂体系。
2.
A weak gel profile control system for high temperature reservoir was prepared with partially hydrolyzed polyacrylamide(HPAM) as main agent,a phenolic aldehyde material as high temperature crosslinking agent.
以部分水解聚丙烯酰胺(HPAM)为主剂,酚醛类物质为高温交联剂,制备了适用于高温油藏的弱凝胶调驱体系,确定其最佳配方为:HPAM浓度1 800 mg/L、酚醛类高温交联剂加量1。
6) Wenmi oilfield
温米油田
1.
Cause analysis and preventive measures of casing failure in Wenmi Oilfield;
温米油田套管损坏原因分析及预防措施
2.
The study results of several remaining oil saturation logging techniques used in Wenmi oilfield indicate RMT logging,with accuracy of 100% and 75% in producing layers' logging and potential layers' logging,is able to effectively reflect remaining oil distribution and producing water;whi.
针对温米油田几种剩余油测井技术研究结果表明,精准剩余油饱和度解释的准确性值得怀疑。
3.
The reservoir of Wenmi Oilfield in Tuha area is characterized by low porosity, low permeability and low productivity, as well as high wax and high asphalt in crude oil.
吐哈温米油田属于低孔、低渗、低产能油藏,原油含蜡量、沥青质较高,油井的近井地带结垢严重。
补充资料：皂化溶解油、肥皂油和调水油
分子式：
CAS号：
性质：又称皂化溶解油、肥皂油和调水油。金属切削油的一类。一般是淡褐色至深褐以液体或半固体。由在矿物油中加入适量的皂类乳化剂（如钠皂、钾皂、松香钠皂、松香皂或环烷酸钠皂）和少量稳定剂（如乙醇或甲醇）而成。使用时与软水掺合成稳定的白色乳化液。作用以冷却为主，润滑为次。用于车制、锯断、钻孔、磨制等金属粗加工。
CAS号：
性质：又称皂化溶解油、肥皂油和调水油。金属切削油的一类。一般是淡褐色至深褐以液体或半固体。由在矿物油中加入适量的皂类乳化剂（如钠皂、钾皂、松香钠皂、松香皂或环烷酸钠皂）和少量稳定剂（如乙醇或甲醇）而成。使用时与软水掺合成稳定的白色乳化液。作用以冷却为主，润滑为次。用于车制、锯断、钻孔、磨制等金属粗加工。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条