1) second residual stresses
二次残余应力
1.
A hybrid experiment method combined numerical modeling and experiment is developed,the second residual stresses in the inside of the tube were measured.
采用非线性有限元法模拟了冷拔钢管的成型过程,得到了钢管脱模以后的残余应力,通过释放切口处单元的刚度模拟了含有残余应力钢管的切割过程,研究了切割方法对残余应力的影响,数值计算和实验结果表明切割方法对二次残余应力有很大影响。
2) residual stresses
残余应力
1.
Effect of simulated welding parameters on pipe girth weld residual stresses;
数值计算模拟工艺参数对管道环焊缝残余应力的影响
2.
Finite element analysis of butt-welding residual stresses;
对接焊残余应力的有限元分析
3.
Simulation Experiment Study of Influence Factors on Residual Stresses of Injection-molded Parts;
注塑件残余应力影响因素的模拟实验研究
3) residual stress
残余应力
1.
Analysis of the effects of residual stress in reinforcing cords on the finite element simulation of radial tire;
残余应力对子午线轮胎有限元模拟结果影响的分析
2.
Study of residual stress in pipe drawing process with fixed mandrel;
固定短芯棒拔管残余应力分布规律研究
3.
Study on residual stress of ZrO_2 thermal barrier coating;
ZrO_2热障涂层残余应力分析
4) remaining stress
残余应力
1.
Analyzes and discusses the processed surface remaining stress mainly from three aspects.
主要从3个方面对加工表面的残余应力进行分析和探讨:冷塑性变形的影响,热塑性变形的影响和金相组织变化的影响。
2.
Its remaining stress and temperature environment have been analyzed using ANSYS.
本文根据激光焊接的特点与实际加工环境建立了激光焊接的热力学模型,利用有限元分析软件ANSYS对焊接结构的温度场及残余应力进行分析,可实现焊接结构的质量和使用性能的预测,便于工程应用。
3.
The implementation method of test for remaining stresses of cold bending thin walled steel sections by the electrochemical corrosion method is discussed mainly.
主要探讨了用电化学腐蚀测试冷弯薄壁型钢残余应力的实施方法 ,并对冷弯卷边角钢的残余应力用这种方法进行了测试 得到了冷弯薄壁型钢残余应力分布的基本规
5) residue stress
残余应力
1.
The experiments under laboratory and production conditions have shown that process bars significantly affect the magnitude and distribution of casting residue stress through the mechanical resistance stress during the solidifying and cooling process.
在实验室与生产条件下进行的判断性试验验证,工艺筋对铸件在凝固及冷却过程中的机械阻碍作用,使铸件的铸造残余应力的大小、分布发生显著的变化。
2.
The causes of the cracking failure and crack development mechanisms of oil well conduit are analyzed through macro observation and SEM analysis as well as residue stress testing.
对B油井套管通过宏观观察和电镜扫描分析,借助于自制电解平面加工仪进行残余应力测试,分析了引起油井套管开裂的原因和裂纹形成的机理。
3.
A DC-contact series radio frequency(RF) micro electromechanical system(MEMS) switch with slanting beams was developed to eliminate warping of the cantilever beam due to residue stresses.
为解决悬臂梁结构的射频微机电系统开关在残余应力的作用下会发生翘曲的问题,提出在悬臂梁的顶端引入斜拉梁的方法。
6) welding residual stress
残余应力
1.
The successful application of explosion treatment on relieving welding residual stress in S belt of hot-blast stove in WIS(G)CO is introduced.
介绍了消除焊接残余应力爆炸处理技术在武钢高炉热风炉上的成功应用。
2.
The welding residual stress decreases the strength and stability of the SiC-metal joining structure.
焊接残余应力降低连接强度和结构的稳定性。
3.
Welding residual stresses in the integrative linking part of Yangzi river bridge were investigated by using the hole-drilling strain-gage method.
采用盲孔法来研究焊接整体节点的残余应力。
补充资料：轧辊残余应力(见轧辊应力)
轧辊残余应力(见轧辊应力)
residual stresses in roll
zhagun eanyu yingli轧辊残余应力(residual stresses in roll)见礼辐应力。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条