1) welding machine
焊接机
1.
Application in the roll welding machine welds part combination change of position control of frequency converter;
变频器在轧辊焊接机焊件组合变位控制中的应用
2.
The structure,performance and welding technology of a mobile welding machine for drilling tool hard banding on site were intro- duced.
介绍了一种可在钻井现场对钻具耐磨带进行堆焊的可移动焊接机的结构、性能指标及焊接工艺流程,并采用安科100XT药芯焊丝进行试验,优选出了堆焊工艺参数。
3.
The technological process and the basic construction of a welding machine for pipes are described.
介绍了圆管自动焊接机的基本组成和工艺过程 ,设计了基于PLC的电气控制系统 ,介绍一种全新的手动程序和自动程序统一编写的编程技
2) welded casing
焊接机壳
1.
Dynamic characteristics analysis on the welded casing of large scaled axial flow compressor
大型轴流压缩机焊接机壳的动态特性分析
2.
On the basis of the established welded casing finite element model of large scaled axial flow compressor, contact problems between step surface of linking bolt and flange surface of upper casing and between upper and lower casing flange surfaces and pre-tightening problem of bolt have been processed.
在建立大型轴流压缩机焊接机壳有限元模型的基础上,对联接螺栓台阶面与上机壳法兰面和上下机壳法兰面之间的接触问题,以及螺栓的预紧问题进行了处理,应用有限元分析软件对模型进行了分析计算。
3.
Based on the finite element(FE) model of welded casing for large axial compressor,the problem of surface-contact between bolted flange & the top casing flange and the top casing flange & bottom casing flange as well as the problem of pre-load of bolts were dealt with in this paper.
在建立大型轴流压缩机焊接机壳有限元模型的基础上,对联接螺栓台阶面与上机壳法兰面之间、上下机壳法兰面之间的接触问题以及螺栓的预紧问题进行了处理,并应用有限元分析软件对模型进行了分析计算。
3) welder interface
焊机接口
4) special welding machine
焊接专机
1.
Design of special welding machine of automobile coanecting-cod;
汽车连杆类焊接专机的研制
2.
This article elaborated the design of special welding machine of automobile linking-bar,mainly included the mechanism design and the electricity control design.
本文论述了汽车连杆类焊接专机的设计,主要包括机械结构设计和电气控制设计。
5) welding casing
焊接机壳
1.
Welding casings are made of 09MnNiDR low temperature steel material, which is applied in welding casing of compressor produced by our company for the first time.
介绍了09MnNiDR低温钢材料在压缩机焊接机壳上的使用情况。
2.
With the quick development of diversity and small batch of products, the substitute of traditional cast casing by the welding casing for large compressors is the requirement due to shortening the period of making, reducing production cost and winning the market.
大型压缩机的生产企业,为了缩短制造周期,降低生产成本,赢得市场,用焊接机壳替代传统的铸造机壳已势在必行。
6) welded machine frame
焊接机架
1.
Based on the welding knowledge and frame structure,the category rule of components is establishecl,according to which the welded machine frame is decomposed into a series of component parts,main support members and individual members.
根据焊接的基本知识和焊接机架的结构,建立焊接机架部件划分规则,将焊接机架分解成部件、支撑杆件和独立杆件等组成部分。
2.
In order to support the whole process of design activities, a hierarchical model to represent the functional and geometrical information of welded machine frame is presented.
通过建立一个基于层次数据结构的焊接机架表示模型 ,表示焊接机架的功能信息和几何信息 ,以支持焊接机架全过程的设计活动 。
3.
A welded machine frame′s computer model is proposed based on the oriented-object technology.
采用面向对象的编程方法建立焊接机架的计算机表示模型,利用该模型的数据结构自动获取有限元分析所需要的空间拓扑信息和几何信息。
补充资料：CJ-2计算机控制陶瓷材料高温蠕变试验机
CJ-2计算机控制陶瓷材料高温蠕变试验机
鲡 C」一2计算机控制陶瓷材料高温蠕变试验机 中国科学院上海硅酸生研完所供稿
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条