1) emulsion method
乳液法
1.
The structures and properties of rectorite/NR composites prepared by emulsion method and melt method respectively were investigated.
研究乳液法和熔体法制备的累托石/NR纳米复合材料的结构与性能。
2.
The results show that the temperature from ZnS to ZnO was 610℃, and ZnS made by emulsion method has smaller grain size.
利用化学沉淀法、均匀沉淀法和乳液法合成了不同晶粒尺寸的纳米ZnS。
3.
Nanometer ZnS with different particle size were prepared by chemical precipitation,precipitation from homogeneous solution and emulsion method respectively.
利用化学沉淀法、均匀沉淀法、乳液法合成了不同晶粒尺寸的纳米ZnS。
2) emulsion
[英][ɪ'mʌlʃn] [美][ɪ'mʌlʃən]
乳液法
1.
The preparation of ZrO_2 spherical nanometer powders via emulsion processing route;
用乳液法制备ZrO_2纳米球形颗粒
2.
Reasearch of preparation of aminopolysiloxane by emulsion;
乳液法合成氨基聚硅氧烷的研究
3.
The spherical LiCoO2 used in lithium-ion-batteries was synthesized by a special emulsion method.
采用一种特殊乳液法,制备了锂离子电池正极材料球形LiCoO2。
3) microemulsion
微乳液法
1.
The preparation of nano Fe_2O_3 powder via W/O microemulsion method and its gas sensitivity;
Fe_2O_3基纳米粉体的微乳液法制备及其气敏性
2.
Synthesis of Calcium Fluoride Nanoparticles from Microemulsion;
微乳液法制备CaF_2纳米颗粒
3.
Preparation of Pt/C electrocatalyst used in PEMFC by microemulsion method;
微乳液法制备PEMFC用Pt/C电催化剂
4) microemulsion method
微乳液法
1.
Preparation of nano-sized SiO_2 particles by microemulsion method;
微乳液法制备纳米二氧化硅粉末
2.
The gas sensing property of nano-CuO materials made by microemulsion method;
微乳液法合成的CuO纳米材料的气敏性
3.
Synthesis of acrylic fiber with grafting polyaniline by microemulsion method and its properties;
微乳液法腈纶接枝聚苯胺及其性能研究
5) emulsion method
乳浊液法
1.
7H_2O by the emulsion method.
FeSo_4·7H_2O为原料，用乳浊液法制备了平均粒径在12－18nm的超细球形Fe_2o)_3粉体，运用X射线衍射、电感耦合等离子体光谱、透射电镜等分析手段对粉体进行了表征。
2.
Ultrafine Y2O3 stabilized ZrO2 powder with average crystalline size of 13～14um and irregular oreven spherical secondary particle shape has been prepared by the emulsion method.
用乳浊液法制备了平均晶粒尺寸为１３～１４ｎｍ，二次颗粒呈多边形或球形的３ｍｏｌ％Ｙ２Ｏ３－ＺｒＯ２粉体。
6) emulsion ABS resin
乳液法ABS
1.
Two mass ABS resins and two emulsion ABS resins glass-fiber compositions were prepared in two screw extruder.
利用双螺杆挤出机共混挤出法分别制备了两种玻纤增强本体法(丙烯腈/丁二烯/苯乙烯)共聚物(ABS)复合材料和两种玻纤增强乳液法ABS复合材料,从熔体流动速率、力学性能、耐热性能等方面比较了它们的差别,并研究了(苯乙烯/马来酸酐)共聚物(SMAH)对玻纤增强ABS复合材料性能的影响。
补充资料：乳液法聚氯乙烯树脂
分子式：
CAS号：
性质：指用乳液聚合法制备的一种聚氯乙烯树脂。1%二氯乙烷溶液20℃是绝对黏度为（1.6～2.4）×10-3Pa·s。与苯二甲酸二辛酯以1:1配成之糊，搁置24h后黏度为3～10Pa·s。由氯乙烯在水，乳化剂，氧化-还原引发剂存在和搅拌下进行聚合，形成胶乳，再经喷雾干燥而得。还可分为一般乳液聚合、种子乳液聚合、连续乳液聚合等工艺。大部分产品用于配制聚氯乙烯糊，进行各种糊加工成型。另外可用烧结法制蓄电隔水层微孔隔板。
CAS号：
性质：指用乳液聚合法制备的一种聚氯乙烯树脂。1%二氯乙烷溶液20℃是绝对黏度为（1.6～2.4）×10-3Pa·s。与苯二甲酸二辛酯以1:1配成之糊，搁置24h后黏度为3～10Pa·s。由氯乙烯在水，乳化剂，氧化-还原引发剂存在和搅拌下进行聚合，形成胶乳，再经喷雾干燥而得。还可分为一般乳液聚合、种子乳液聚合、连续乳液聚合等工艺。大部分产品用于配制聚氯乙烯糊，进行各种糊加工成型。另外可用烧结法制蓄电隔水层微孔隔板。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条