|
|
|
说明：双击或选中下面任意单词，将显示该词的音标、读音、翻译等；选中中文或多个词，将显示翻译。
|
|
|
1) effect of reservoir development
油藏开发效果
2) reservoir exploitation
油藏开发
3) reservoir development
油藏开发
1.
An evaluation method of reservoir development effectiveness by using individual well deliverability sequence;
基于单井产能序列的油藏开发效果评价方法
2.
Both oil and gas forming and reservoir development are based on the energy difference.
油气成藏与油藏开发得以实现的基础是存在能量差,流体(烃类流体或油气水)作为能量传递的载体,在地质体中建立动态的能量平衡。
3.
The existing casing pipe protection problems in reservoir development is to be solved with these log information,so as to determine the position of casing damage with optimized log information.
针对注水开发的油田高含水时期油藏开发套管防护的实际情况,综合地分析了方位井径、电视成像、动态监测等测井资料的应用情况,依据并利用这些生产测井资料来解决油田开发过程中套管防护的实际问题,力求以优化的测井资料为油藏开发提供亟待了解的井下套管防护所必须的信息,阐述生产测井资料在油田高含水时期开发过程中对套管防护所起的作用,为高含水时期油田开发提供最佳的动态监测技术支持,并对套管防护工作提出建议。
4) development effect
开发效果
1.
Analyses of the horizontal well development effect in Jiangsu complex small fault block;
江苏复杂小断块水平井开发效果分析
2.
A new discussion on comprehensive evaluation system of development effect in complex fault-block reservoirs;
复杂断块油藏开发效果综合评判体系新探讨
3.
Reservoir wettability change of the 8~3 stratum of Es_2 in Block No.2 of Shengtuo Oilfield and its influence on development effect;
胜坨油田二区沙二段8~3层储层润湿性变化及对开发效果的影响
5) development response
开发效果
1.
Good development response has been ach.
针对油藏特点,在油藏精细描述的基础上,综合应用多功能解释测井、饱和度测井、吸水剖面测井、动态资料分析以及油藏数值模拟等方法,研究该断块剩余油的分布规律,提高了研究的准确性,取得了较好的开发效果。
2.
As a result,oil recovery factor is enhanced,both composite and natural decline are reduced,and efficient development response.
通过现场应用,提高了区块采收率,减缓了综合递减和自然递减,获得了高效开发效果。
3.
The geological influence factors and development response of waterflooding have been evaluated by grey comprehensive evaluation technology according to current development performance.
针对油田开发现状,应用灰色综合评价技术对油田水驱开发潜力地质影响因素和开发效果进行评价,在油藏剩余油、加密调整潜力分析基础上,基于数值模拟技术,有针对性地转变油藏开发模式,调整层系井网,充分动用挖潜油藏剩余油。
6) development effectiveness
开发效果
1.
Influence of reservoir heterogeneity on oilfield development effectiveness;
储层非均质对油田开发效果的影响
2.
Simulation of improving development effectiveness of Daqing oil field Chao 45 tract;
模拟改善大庆油田朝45区块的开发效果
3.
The development effectiveness of this reservoir was poor,because of low water-drive efficiency and low yielding capacity compared with resource extent.
克拉玛依八区下乌尔禾组油藏是一个低孔隙、特低渗透、带裂缝的厚层块状砾岩油藏,采用一套井网开发,开发效果不理想。
补充资料：Pro/E二次开发使用toolkit开发trigger的程序
使用toolkit开发trigger的程序时,往往需要能够连续通过trigger来触发dll中的函数.
我碰到的问题:
1.配置trigger:
Name: CimDll
Event: Create PIV
Time: POST
RequireNO
DLL:Cim.dll
Function:PDMTPIVCreatePostOperation
2.源代码:
int PDMDLLInit()
{
PTCERROR pdm_status;
FILE *g_pfileLog;
g_pfileLog =fopen("test.dat","w");
setbuf(g_pfileLog,NULL);
fprintf(g_pfileLog,"begin test\n");
pdm_status = PDMTriggerRegister("PDMTPIVCreatePostOperation", PDMTPIVCreatePostOperation);
if (pdm_status != PDM_SUCCESS)
{
printf("Failed to Register Trigger PIV Create Post.\n");
}
return (pdm_status);
} int PDMTPIVCreatePostOperation(int argc, void **argv)
{
fprintf(g_pfileLog,"test\n");
.....
fprintf(g_pfileLog,"end test\n");
fclose(g_pfileLog); } 结果:以上代码存在的问题:如果我们在第一次checkin到C/S中后,删除test.dat文件,然后再进行checkin时,发现没有再生成test.dat,在函数PDMTPIVCreatePostOperation()中所进行的对文件的操作都无效.
原因:我们使用trigger触发时,真正起作用的是函数:PDMTPIVCreatePostOperation(),而PDMDLLInit()只是在第一次checkin时起作用,所以在第一次调用PDMTPIVCreatePostOperation()后,我就fclose(g_pfileLog),所以出现了上面的情况.所以注意的是:不要把一些重要的东西放在函数PDMDLLInit()中.
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条
|