1) thermal analysis
热分析法
1.
Study on phase behavior of cationic silico dioxide/polyurethane (SiO_2/PU) nanocomposites by thermal analysis;
热分析法对阳离子型二氧化硅/聚氨酯纳米复合材料相行为的研究
2.
Methods Thermal analysis,HPLC/MS,HPLC with terminal wavelength,HPLC with fluorescence derivation and with ultraviolet derivation,TLC and nonaqueous titration methods were applied to determine the content of cyclovirobuxine D control.
结果热分析法不能用于环维黄杨星D纯度分析,HPLC/MS、紫外衍生HPLC、荧光衍生HPLC及末端检测HPLC四法测定的环维黄杨星D纯度一致。
3.
The methods concerned include X-ray diffraction,thermal analysis,dilatometry,acoustic emission and electrical resistance,of which the last one is widely used in that,in addition to the fact that the testing process can hardly affect the samples,it has high precision,simple electro-circuits,and high speed as well.
讨论了形状记忆合金相变温度的常用测量方法的现状、优缺点及发展趋势,包括变温X射线法、热分析法、膨胀法、声发射法及电阻法。
2) Thermal Analysis Method
热分析法
1.
The principle of thermal analysis method and the procedure were introduced in detail.
基于在连续冷却过程中,材料发生相变时,有一定的相变潜热释放的原理,建立了热分析法测定材料相变点的分析方法。
2.
At the same time, the advantages and disadvantages of each method are separately analyzed, and the development trend of thermal analysis method for evaluating the thermal hazard of energetic materials is discussed.
从自加速分解温度(SADT)评价含能物质的热危险性出发,分析了联合国危险物运输专家委员会推荐的几种方法对含能材料热危险性评价的局限性,简述了与热分析法相关的测定含能材料自加速分解温度的方法,主要有加速量热仪法、TG-DTA、DSC、微量热法、动力学模拟法、绝热自点火实验法等。
3.
The paper reviews the various techniques commonly used in the kinetic measurement for metal hydrides,including volumetric method and thermal analysis method.
本文概述了测定金属氢化物反应动力学常用的各种实验技术,包括定容法和热分析法等,分析了不同实验系统测量误差的产生和消除,总结了各种技术的特点和不足,并对新技术的发展趋势进行了展望。
3) thermal analytical method
热分析法
1.
Ultrafine Sb 2O 3 powders were prepared by three different wet chemical methods; and its retarding mechanism was discussed; and the retarding characteristics were studied by thermal analytical method and vertical burn metho
用三种不同的湿化学方法制备了 Ｓｂ２Ｏ３ 阻燃微粉， 对其阻燃机理进行了探讨， 并采用热分析法及垂直燃烧法对其阻燃特性进行研究 。
4) thermal analysis technique
热分析法
1.
Identification on medical material and extracts of Radix Salviae Miltiorrhizae by thermal analysis technique;
热分析法鉴别丹参药材及其提取物
5) thermogravimetry
[,θə:məuɡrə'vimitri]
热重分析法
1.
The thermal lifetime and degradation kinetics of styrene-diene-styrene triblock copolymers(SIS,SBS and SI/BS) were investigated by thermogravimetry.
用热重分析法研究苯乙烯-二烯烃-苯乙烯三嵌段共聚物(SIS,SBS和SI/BS)的热降解动力学及热寿命。
2.
The dewatering temperatures of the low level hydrated zinc borate prepared with tWo different methods have been measured by thermogravimetry.
用热重分析法测定了用两种合成方法制备的低水合硼酸锌的脱水温度，其脱水温度均达到３４０℃。
3.
The residual of EPS30R were measured by thermogravimetry,the values of 1# and 2# EPS30R were 1.
采用热重分析法测试1#和2#EPS30R的残存量分别为1。
6) thermogravimetric analysis
热重分析法
1.
The pyrolysis characteristics of four kinds of waste plastics in municipal solid waste—waste polyethylene(PE), waste polystyrene(PS),waste polypropylene(PP),waste polyethylene glycol terephthalate(PET) and the coal powder for blast furnace were studied by thermogravimetric analysis(TGA),and the parameters of pyrolysis dynamics were calculated.
采用热重分析法(TGA)研究了城市固体垃圾中的4种常见废弃塑料———废弃聚乙烯农膜(PE)、废弃聚苯乙烯泡沫塑料(PS)、废弃聚丙烯编织袋(PP)、丢弃的聚对苯二甲酸乙二醇酯饮料瓶(PET)和高炉喷吹用煤粉的热解特性,并计算出它们各自的热解动力学参数。
2.
The corrosion behaviors of Fe-base engineering materials with different Cr contents beneath KCI salt film were examined at 750～80℃ in air by thermogravimetric analysis.
利用热重分析法对几种工程材料在KCl盐膜下于 75 0～ 80 0℃空气中的腐蚀进行了研究。
补充资料：差热分析法
分子式：
分子量：
CAS号：
性质：在程序控制温度下，测量物质和一惰性参比物（如氧化铝、碳化硅或玻璃珠）的温度差和温度关系的一种技术。将不发生相变化的惰性物质和待测样品放在一个易导热的金属块中，在相同的条件下升温或降温，利用热电偶记录两者的温度差别。当样品不发生相变时，两者温度是一致的；当样品发生相变时，伴随有热效应，两者的温度则不同而产生温差。当相变过程结束后，两者的温度则不则不同而产生温差。根据物质的相变和化学反应所产生的特征吸热或放热来鉴别天然产物和人工制品（如硅酸盐、铁氧体、粘土、陶瓷、水泥等）的组成。可用以测定物质的比热容、相转变、磁性转变和绘制相图。也可用于对聚合物混合物的定性分析。
分子量：
CAS号：
性质：在程序控制温度下，测量物质和一惰性参比物（如氧化铝、碳化硅或玻璃珠）的温度差和温度关系的一种技术。将不发生相变化的惰性物质和待测样品放在一个易导热的金属块中，在相同的条件下升温或降温，利用热电偶记录两者的温度差别。当样品不发生相变时，两者温度是一致的；当样品发生相变时，伴随有热效应，两者的温度则不同而产生温差。当相变过程结束后，两者的温度则不则不同而产生温差。根据物质的相变和化学反应所产生的特征吸热或放热来鉴别天然产物和人工制品（如硅酸盐、铁氧体、粘土、陶瓷、水泥等）的组成。可用以测定物质的比热容、相转变、磁性转变和绘制相图。也可用于对聚合物混合物的定性分析。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条