1) Tube/tubesheet
管/板
2) TubeSheet
管板
1.
Reasons for the tubesheet deformation of heat exchanger and the antideformation process;
列管式换热器管板变形的原因及防止变形的工艺
2.
Heat Exchanger Strength Calculation Formula Deduction Considering Shell-tubesheet Temperature Difference;
考虑壳体-管板温差的换热器强度公式推导
3.
A Study of the Stiffness Analysis on Corrugated Tube and Its Effects on the Strength of Tubesheet;
波纹换热管刚度分析及对管板强度的影响
3) tube sheet
管板
1.
Models of the Finite Element Analysis of Tube Sheets and Their Comparison;
管板有限元分析模型与对比
2.
Research on optimization of digitally controlled hole drilling route of tube sheet;
管板数控钻孔路线优化研究
3.
Welding Between the Tube Sheets and the Head of a Water Cooler;
水冷却器管板与封头焊接的控制
4) tube plate
管板
1.
Research for Melting Process of 1000MW Nuclear Evaporator Tube Plate Steel;
1000MW核电蒸发器管板炼钢工艺研究
2.
This paper summarized the better practical treatment from analysis the sulfur condenser tube plate crack and dealed wit.
硫冷凝器是硫磺回收装置的核心设备之一,硫冷凝器泄漏是硫磺回收装置中普遍存在的问题,严重制约了硫磺回收装置的长周期运行,泄漏的原因多种多样,管板产生裂纹是导致泄漏的主要原因之一,解决该问题能有效提高硫磺回收装置的运行周期,本文将实践中总结的效果较好的硫冷凝器管板裂纹处理方法从原理分析、处理方案到处理效果作了详细介绍,并提出了改进建议。
3.
The welding of the tubes to the tube plate is a key process during the manufacturing of the heat exchanger.
管子-管板焊接是换热器生产的关键工序,通过对缩进式管子-管板焊接技术进行的试验和分析,确定了最佳的焊接参数,供换热器制造厂有关技术人员参考。
5) tube-plate
管板
1.
Reasons analysis and treating measures for tube-plate inner wall corrosion of re-boiler
再沸器管板内管壁腐蚀原因分析及处理措施
2.
The reason for the deformation of the slipping tube-plate and the failure of the joint between tube and heat tube-plate of the Ethylbenzene/steam super-heater in use was analysed.
针对乙苯蒸汽过热器在使用过程中出现的滑动管板变形、换热管与热端管板连接接头泄漏等问题 ,文章从结构和制造两方面分析了它们产生的原因。
3.
Failure analysis of the middle support tube-plate was made in material quality,operating and stress-analysis with metallurgical analyzing,energy spectrum analyzing and electron microscopic analyzing.
对余热锅炉内部元件过热器中间支撑管板的断裂进行了电镜、金相及能谱分析,其结果可为类似工况石化设备的修复或更换工作提供一定的借鉴。
6) tube-sheet
管板
1.
Technology analysis on tubes and tube-sheetexpand-junction of heat exchanger;
换热器管子与管板胀接工艺分析
2.
The Numerical Simulation for the Expansion Course in Tube and Tube-sheet of Steam Generator;
蒸汽发生器中传热管和管板胀接过程的数值模拟
3.
Based on the homogenization theory and finite element method,factors influencing the performance of heat exchanger's tube-sheet structure were discussed.
根据复合材料力学中的均匀化理论并借助有限元方法,针对管板设计中存在的问题,对影响管板结构性能的因素进行探讨。
补充资料：薄管板废热锅炉
分子式：
CAS号：
性质：是一种双层薄管板型锅炉，其结构特点是上管板用普通厚度板作为固定点，下管板为柔性结构。为增加薄管板的强度，可用一特殊结构的栅板支承薄管板。壳程水进口处有遮板，使水进入后先向下流，然后经下管板再向上流动。下封头内裂解气进口处设有气体分布器，由两层不同角度的折流板组成。用于乙烯装置高温裂解气的热回收。
CAS号：
性质：是一种双层薄管板型锅炉，其结构特点是上管板用普通厚度板作为固定点，下管板为柔性结构。为增加薄管板的强度，可用一特殊结构的栅板支承薄管板。壳程水进口处有遮板，使水进入后先向下流，然后经下管板再向上流动。下封头内裂解气进口处设有气体分布器，由两层不同角度的折流板组成。用于乙烯装置高温裂解气的热回收。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条