1) blank
[英][blæŋk] [美][blæŋk]
坯料
1.
Finite element analysis and optimization of blank for fender groupware;
翼子板裙板成形有限元分析及坯料优化
2.
The effect of blank quality on the property of cold rolling ribbed steel bars;
坯料质量对冷轧带肋钢筋性能的影响
3.
Using rolling pressure on sawmill slabs of Chinese fir (Cunninghamia lanceolata) to form a combing processing blank;
杉木制材板皮辊压制备梳解加工坯料的研究
2) billet
[英]['bɪlɪt] [美]['bɪlɪt]
坯料
1.
This paper introduced the forming process of semi-solid metal, production methods of billets, numerical simulation, and the study and application situation at home and abroad.
介绍了半固态金属成形工艺、坯料制备工艺、数值模拟状况、国内外研究应用情况,发展中存在的问题及研究重点。
2.
And the optimization principle of billet material included selecting maximum slab.
为最大限度地发挥设备的能力 ,结合济钢中厚板厂目前的工艺装备水平 ,从轧辊辊型、加热能力、冷床能力、品种板的生产、热送热装五个方面分析了生产计划的优化以及其对中厚板生产的影响 ,并提出了选用设备允许的最大料型、宽板用宽料型、窄板用窄料型及优先选用多倍尺生产的坯料优化原则。
3.
The results shows that the section size of billet with the specification of 130 mm×240 mm can be used for the production of channel No20 #.
通过对孔型修改后 2 0 #槽钢的生产实践表明 ,基本上解决了涟钢用 1 3 0 mm× 2 4 0 mm连铸坯生产 2 0 #槽钢时 ,坯料断面尺寸过小的问题 ;较之原来金属流动更趋合理 ,轧制稳定 ,负偏差轧制也较修改前好 ,收到了良好的经济效
3) body
[英]['bɔdi] [美]['bɑdɪ]
坯料
1.
Application of basic rock in ceramic body and glaze was studied.
介绍了基性岩的矿物组成、化学组成及于热处理时的相变 ,研究了基性岩于陶瓷坯料和釉料中的应用可行性。
2.
The process of developing high-grade domestic porcelain is narrated with local raw material-Xiaohe kaolin' The batch formulas of body and glaze are given.
叙述了利用当地原料──硝河土研制高档日用瓷的过程，并列出了坯料配方和釉料配方。
3.
The tests on sexpansion of clay after moisture absorption and its performance have been discussed, The cause of body moisture shatter and shed shatter has been analyzed through test on expansion of clay and body after moisture absorption.
讨论了粘土和坯料吸湿膨胀试验方法,并通过对粘土、坯料吸湿膨胀试验,分析了坯体水分炸裂、掉伞的原因。
4) Stuff
[英][stʌf] [美][stʌf]
坯料
1.
This paper gives a new and accurate and reasonable analyzing and spreading out method for the stuff of the cold drawing helical vane, and explores the precise adjusting coefficient in experiment for the inner hole of the helical vane.
提出了一种新的、更趋精确合理的关于冷拉螺旋叶片坯料的展开与放样计算方法 ,并从实践中探索出叶片在展开与放样时其内径的精确修正系数k之值。
5) foil stock
坯料
1.
The influence of foil stock for process harden during foil rolling;
坯料对箔轧加工硬化的影响
2.
Hazelett continuous casting followed by in-line hot rolling with tandem mills is recommended for producing good quality foil stock of aluminum.
推荐使用美国哈兹列特连铸连轧工艺生产铝箔坯料所需的热轧带。
6) stock
[英][stɔk] [美][stɑk]
毛坯,坯料
补充资料：坯料
1.已具有所要求的形体，但还需要加工的制造品;半成品。 2.在机器制造中，材料经过初步加工，需要进一步加工才能制成零件的半成品，通常多指铸件或锻件。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条