1) composite
[英]['kɔmpəzɪt] [美][kəm'pɑzət]
复相材料
1.
The Sintering and Properties of the TZP-Glass Composite Materials;
增韧氧化锆－玻璃复相材料的烧结及其性能
2.
MgO/AlN composite fabricated by directed metal nitridation;
定向金属氮化法制备MgO/AlN复相材料
3.
MgO/AlN Composite Fabricated by Directed Metal Nitridation;
定向金属氮化法制备氧化镁—氮化铝复相材料
2) composites
[英]['kəmpəzit] [美][kəm'pɑzɪt]
复相材料
1.
Optimization of Sintering Process and Composition of the Mullite/SiC Composites;
莫来石/SiC复相材料的烧结工艺和成分优化
2.
A two-steps procedure was adopted to synthesize the γ-AlON-TiN composites by hot pressure sintering technique.
本文采用二步法热压合成了γ AlON TiN新复相材料 ,对纯γ AlON及复相材料进行了热分析(Thermalanalysis) ,发现纯γ AlON在 819 7℃时发生分解 ,而γ AlON TiN复相材料的分解温度有所推迟 ,TiN质量百分含量为 5 %的复相材料分解温度 874 5℃ ,TiN质量百分含量为 10 %的复相材料在本实验温度范围内 (～10 0 0℃ )没有发现分解现象 ,对热分析后的样品进行XRD分析 ,结果表明分解后的相组成不变 ,证明吸热峰是由分解所致。
3.
The relationship between mechanical property and microstructure in AlON-TiN composites was studied systematically.
系统研究了AlON TiN复相材料力学性能和显微结构的关系。
3) composite materials
复相材料
1.
Secondly, the author would like to introduce homogenization method and multi-scale asymptotic analysis methods proposed and developed by Professor CUI Junzhi (member of CAE),the author and many scientists in the world for the crucial problems on the structures and engineering of composite materials.
然后介绍我与崔俊芝院士及国内外其他学者针对复相材料结构与工程中重要问题 ,建立和发展的均匀化方法和多尺度渐近分析方法 ,重点介绍其基本思想、主要结果、存在的问题以及在材料与工程中的应用。
2.
Ba2LaBiO6/ZnO composite materials are prepared by a traditional solid sintering method.
采用固相烧结法制备了Ba2LaBiO6/ZnO复相材料,研究了Ba2LaBiO6/ZnO复相材料的组成和显微组织对材料电性能的影响:实验样品在较宽的温度范围内均显示了良好的NTC特性;烧结体中的相主要由六方结构的ZnO、立方结构的Ba2LaBiO6及含量很少的未知相组成,样品的平均晶粒尺寸随着材料中ZnO含量的增加有减小的趋势。
3.
Mullite / cordierite composite materials, a new kind of kiln refractory, is applied to various kinds of porcelain products extensively.
本研究是以铝型材厂工业污泥为主原料,一次性合成莫来石/堇青石复相材料,再以合成料研制窑具。
4) multiphase material
复相材料
1.
ZrO_2-Al_2TiO_5 multiphase materials with high strength and low expansion were prepared by partially stabilized zirconia (PSZ)powder with different particle sizes coated with nanosized Al_2TiO_5 by co-precipitation method and then sintered at high tem- perature.
以不同粒径的部分稳定ZrO_2(partially stabilized zirconia,PSZ)粉体为原料,采用共沉淀法包覆Al_2TiO_5纳米颗粒层,经高温烧结制备了高强度低膨胀的ZrO_2-Al_2TiO_5复相材料。
5) Multiphase materials
复相材料
1.
Study on Synthesis and Preparation of Corundum/Mullite/Gahnite-based Multiphase Materials;
刚玉—莫来石—锌铝尖晶石复相材料的合成与制备
6) composite phase change material
复合相变材料
1.
Preparation of paraffin/expanded perlite composite phase change materials
石蜡/膨胀珍珠岩复合相变材料的制备
2.
Preparation of SiO_2/fatty acid composite phase change materials via sol-gel method
溶胶-凝胶法制备SiO_2/脂肪酸复合相变材料
3.
And then the composite phase change material was applied onto the fabric by coating with the .
采用涂层法将复合相变材料用于调温纺织品的研发。
补充资料：赝复材料
分子式：
CAS号：
性质：见颌面整形植入物
CAS号：
性质：见颌面整形植入物
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条