1) spray-dried emulsion
喷雾干燥乳剂
1.
Formulation study of spray-dried emulsion of ZLR-8:a nitric oxide-releasing anti-inflammatory drug;
非甾体抗炎药ZLR-8喷雾干燥乳剂的处方研究
2.
Preparation and content determination of ZLR-8 spray-dried emulsion;
ZLR-8喷雾干燥乳剂的制备及高效液相色谱法含量测定
3.
Enhancement of in situ intestinal absorption of an insoluble NO-donating drug ZLR-8 in rats by spray-dried emulsion
喷雾干燥乳剂提高一氧化氮供体药物ZLR-8大鼠在体肠吸收的研究
2) emulsion-spray drying
乳化喷雾干燥
1.
Emulsion-spray drying and beta-cyclodextrin(β-CD) are two kinds of technology of flavormicroencapsulation, and the emulsion-spray drying is a traditional method, β-CD is a newlymethod.
乳化喷雾干燥法和β-环糊精(β-CD)法是风味物质微胶囊化的两种方法,前者为传统技术,后者是近年来新兴的微胶囊化手段,本文比较了两种方法所制备产品的贮存性能和耐高温特性,为今后继续开发耐高温型微胶囊化香精进行探索。
3) Spray-drying
喷雾干燥
1.
Study on microencapsulation of jade perch oil by spray-drying technique (I);
喷雾干燥法制取宝石鱼油微胶囊技术研究(Ⅰ)
2.
Preparation of Esters-catechin Microcapsule by Spray-drying;
喷雾干燥制备酯型儿茶素微胶囊
3.
Studies on Spray-drying Process of Qingfei zhichuan Capsule;
清肺止喘胶囊剂的喷雾干燥工艺研究
4) spray drying
喷雾干燥
1.
Novel sintering process for alumina in rotary kiln based on spray drying tower;
基于喷雾干燥塔的氧化铝熟料回转窑烧结新工艺
2.
Preparation of tiotropium bromide ultrafine powders by spray drying;
喷雾干燥方法制备噻托溴铵超细粉末
5) spray dryer
喷雾干燥
1.
Three Dimensional Numerical Simulation on Single Atomizer Blend Flow Pressure Spray Dryer;
单喷嘴混流压力式喷雾干燥塔三维数值模拟
2.
For optimizing the flue gas cleaning systems, a model was developed by computational fluid dynamics to simulate the flue gas cleaning by the spray dryer of a waste incineration power plant.
根据垃圾烟气脱酸系统优化的需要,使用计算流体力学的方法建立了垃圾焚烧电厂喷雾干燥脱酸系统的数值计算模型,通过联合求解烟气动量、能量、湍流和组分方程,浆滴运动方程,浆滴蒸发和脱酸模型,得到了脱硫效率和脱氯效率模型。
3.
In this paper, the principle and speciality of the spray dryer in ceramics mill were introduced, then its energysaving method was also discussed in briefly.
简要介绍了陶瓷生产中喷雾干燥设备的工作原理和使用特点及其节能方法 。
6) spray drying method
喷雾干燥
1.
In this work, the mechanisms of airflow and centrifugal spray drying methods were introduced, then the AMT microspheres having different morphologies were prepared by using these two kinds of spray drying methods, and the morphology and size of the micro.
今介绍了气流式和离心式两种喷雾干燥法的工作原理,通过两种不同喷雾方式成功制备了不同形貌的AMT微球,并研究了微球的形貌和粒度。
2.
Inspirable large hollow nanoparticulate aggregates can be prepared by spray drying method and Peclet number was introduced to explain the formation mechanism.
喷雾干燥法可制备供吸入的大粒径中空纳米聚集体,其形成机制可通过扩散特性参数Peclet数来解释。
3.
The spray drying method was used to prepare the Volatile oil microencapsules,such as oil of Herba Agastachis.
本文采用喷雾干燥法制备藿香油等挥发油微囊，考察了油、水、胶三者比例对挥发油保留率的影响。
补充资料：喷雾干燥器
分子式：
CAS号：
性质：连续式常压干燥器的一种。用特殊设备将液料喷成雾状，使其与热空气接触而被干燥。用于干燥有些热敏性的液体、悬浮液和黏滞液体，如牛奶、蛋、单宁和药物等。也用于干燥染料、中间体、肥皂粉和无机盐等。主要优点是：（1）干燥进行迅速（一般不超过30s），虽然干燥介质的温度相当高，但物料还不致发生过热现象；（2）干物料已经呈粉末状态，可以直接包装为成品。主要缺点是：（1）容积干燥强度小，干燥室所需的尺寸大；（2）要将液料喷成雾状，消耗动力较大。根据液料喷雾的方法有离心喷雾（式）干燥器、机械喷雾（式）干燥器和气流喷雾（式）干燥器三种。
CAS号：
性质：连续式常压干燥器的一种。用特殊设备将液料喷成雾状，使其与热空气接触而被干燥。用于干燥有些热敏性的液体、悬浮液和黏滞液体，如牛奶、蛋、单宁和药物等。也用于干燥染料、中间体、肥皂粉和无机盐等。主要优点是：（1）干燥进行迅速（一般不超过30s），虽然干燥介质的温度相当高，但物料还不致发生过热现象；（2）干物料已经呈粉末状态，可以直接包装为成品。主要缺点是：（1）容积干燥强度小，干燥室所需的尺寸大；（2）要将液料喷成雾状，消耗动力较大。根据液料喷雾的方法有离心喷雾（式）干燥器、机械喷雾（式）干燥器和气流喷雾（式）干燥器三种。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条