1) gel-casting
凝胶浇注
1.
The green bodies of carbon nanotubes/hydroxyapatite(CNTs/HA) composite were prepared by gel-casting process.
采用凝胶浇注成型工艺制备了纳米碳管/羟基磷灰石复合材料坯体。
2.
9)(DCO) powders were prepared by a modified gel-casting process withorganism aided.
以硝酸盐为原料,采用有机物辅助的水基凝胶浇注(Gel-casting)工艺合成出了Gd_(0。
2) gelcasting
凝胶浇注
1.
The forming processes of gelcasting,the microstructure of green bodies and the properties of zirconia ceramics were studied.
主要研究了氧化锆陶瓷的凝胶浇注成型工艺,以及坯体的微观结构和烧成后陶瓷的力学性能,并讨论获得高性能的原因。
2.
2)O_(2-y),TSDC)powders doped with 0～15% mol percents of TiO_2 were prepared by the gelcasting process.
通过凝胶浇注法制备了 TiO_2掺杂量为0～15% (摩尔分数)的 TiO_2-Ce_(0。
3) gel-casting
凝胶浇注法
1.
Sm and Gd co-doped CeO2 (SGC) powders were prepared by the gel-casting method.
通过凝胶浇注法制备了Sm,Gd共同掺杂的CeO2(SGC)粉末,将制得的粉末经1400℃高温烧结4h得到相应的SGC电解质烧结体,并对SGC粉末及相应的烧结体的性能进行了表征。
2.
9(TiO2-SDC) powder was prepared from the corresponding nitrates and oxides by a gel-casting method.
以硝酸盐和氧化物为原料,通过凝胶浇注法制得了摩尔分数为10%TiO2-Ce0。
3.
5xSmxTiO3 powders were prepared by gel-casting process.
采用凝胶浇注法制得了Sr1-1。
4) gel-casting
凝胶浇注成型
5) gelcasting
凝胶浇注成型
1.
Concentrated SiC slurry with Y2O3 and Al2O3 as sintering assistants was prepared, by using the medium of gelcasting premix solution and pH adjusting reagent of TMAH (tetramethylammonium hydroxide).
采用一种凝胶浇注成型预配液作为陶瓷粉体的分散介质,将亚微米级SiC粉体和烧结助剂Y2O3、Al2O3直接混合,制得了固含量>50vol％的凝胶浇注浆料,在100s-1的剪切速率下,浆料粘度<1Pa·s,可以顺利实现凝胶浇注成型;对得到的SiC素坯进行了无压烧结。
2.
Water soluble epoxy resin was used as gel former in the zirconia gelcasting process.
研究了氧化锆凝胶浇注成型工艺中,水溶性环氧树脂凝胶剂对浆料的流变性和固化过程的影响。
6) gelcasting
凝胶浇注成形
1.
Preparing and gelcasting of high concentrated titanium carbide suspension;
高固相含量碳化钛悬浮体的制备和凝胶浇注成形
补充资料：Sds-聚丙烯酰胺凝胶电泳凝胶电泳
sds-聚丙烯酰胺凝胶电泳（sds-page，sodium dodecyl sulfate-polyacrylamide gel electrohoresis）
在有去污剂十二烷基硫酸钠存在下的聚丙烯酰胺凝胶电泳。sds-page只是按照分子大小分离的，而不是根据分子所带的电荷和大小分离的。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条