1) the surface patterns
表面粗糙花纹
1.
Several film were prepared by varying the raw polyethylene(PE) and the content of PE,then the surface patterns and coarse morphology of these film were view by optical microscopy(OM) and atomic force microscopy(AFM) and the average roughness R_a and the profile peak density D were obtained.
在固定加工条件和聚丙烯(PP)牌号不变情况下吹塑制备不同配比的聚乙烯/聚丙烯(PE/PP)共混薄膜,使用光学显微镜(OM)和原子力显微镜(AFM)观察膜的表面粗糙花纹和粗糙形态并得到表面粗糙度Ra和峰密度D;由此比较共混体系和单组分体系薄膜的表面粗糙花纹及消光效果,研究PE树脂的熔体指数、支化、共聚组分及PE用量对共混薄膜表面粗糙花纹的影响,并确定聚烯烃薄膜消光性能与表面粗糙花纹的关系。
2) mat surface
粗糙表面,布纹面
3) raised grain
粗糙表面;波纹纹理
4) rough surface
粗糙表面
1.
The lubrication mechanism of floating-rig journal bearings under rough surface;
粗糙表面下牙轮钻头浮动套轴承润滑机理研究
2.
Study of measurement system for rough surface accuracy;
粗糙表面精度测量系统的研究
3.
High-order kirchhoff approximation for gaussian dielectric rough surface electromagnetic scattering;
高斯介质粗糙表面电磁散射的高阶基尔霍夫法
5) surface roughness
表面粗糙
1.
In the article,the surface roughness of Oriented Strand Board has been researched from the air forming,applying the surface fine material to improve the board-surface smooth.
本文对定向结构刨花板表面粗糙问题从工艺和设备上进行深入的研究 ,通过气流铺装施加表面细化材料以提高板面平整度。
2.
Simulation of Surface Roughness and Processing Fault Effects on Microchannel Flows;
本文在前人的基础上,对微槽道表面粗糙度和加工缺陷对流动的影响作了数值模拟。
6) rough surfaces
粗糙表面
1.
Some researchers studied normal contact stiffness between rough surfaces in theory, their researches, however, are all based on the statistically describing results of the micro profile of rough surfaces.
指出了以往有关粗糙表面法向接触刚度理论研究工作的缺陷与不足 ,并在一定的前提假设下 ,基于球体与平面的接触理论和粗糙表面的分形接触理论 ,从理论上给出了具有尺度独立性的粗糙表面法向接触刚度分形模型 ,并进行了数字仿真研究。
2.
Scattering from 1 dimensional random rough surfaces with varying roughness was investigated by numerical integration based on Kirchhoff approximation.
本文在Kirchhof近似基础上,利用数值积分方法分析了一维随机粗糙表面的散射特征。
3.
In order to study the PIM power level as a function of the tightness of the junction, the roughness of the waveguide surface, the thickness of the oxide layer on the metal surface and the input carrier power, firstly developed an equivalent ciurcuit model based on the rough surfaces contact model and then calculated the third order PIM power level using power series method.
基于粗糙表面接触模型建立了MIM结构的等效电路模型,然后采用幂级数法计算三阶PIM功率,研究了波导连接的紧固度、波导表面的粗糙度、波导金属表面的氧化层厚度及输入载波的功率对PIM功率的影响。
补充资料:菊花纹
菊花纹 菊花,古代又名节华、更生、朱赢、金蕊、周盈、延年、阴成等别名。菊花是我国的传统花卉之一。《山海经·中山经》:“岷山之首曰女儿之山,其草多鹅”。菊花是“长寿”之花,据传在G县以北河岸上芳菊丛生,其水颇秀,有个叫胡广的人得了病,常饮此水,后大病痊愈,竟长命百岁。还传说朱孺子常饮用甘菊花和梧桐子泡的茶,后成了神仙。古人认为菊花能轻身益气,令人长寿有征。菊花还被看作花群之中的“隐逸者”,并赞它风劲斋逾远,霜寒色更鲜。故常喻为君子。菊和兰都是文人极喜爱的花,将菊花纹样赋予多种多样的含意。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条