1) 20# steel
20#钢
1.
Taking 20# steel commonly used in heat exchanges as a study object,its anticorrosion of hot-dip aluminizing was researched.
选取换热器中较为常用的材质20#钢作为研究对象,研究了20#钢热浸镀铝的抗腐蚀性能,使用便携式瞬时腐蚀速率测量仪对20#钢热浸镀铝前、后的试样在酸性腐蚀介质和碱性腐蚀介质中的年腐蚀速率进行了测试。
2.
In recent years, thinking of working safe, 20# steel is applied to significant construction project in the homeland more and more, especially to burying field facilities, therefore, The study on 20# steel’s corroding law and forecasts has very strong theory significance and gigantic realistic value.
近年来,出于对安全运行的考虑,20#钢正越来越多的被应用于国内重大建设项目的工程实践中,尤其是被应用于埋地设施中,所以对20#钢在土壤中的腐蚀规律及预测的研究具有很强的理论意义和巨大的实际应用价值。
3.
The tribological properties of GCr15 steel ball against 20# steel disc under unlubricated condition and lubrication of plant oil containing nano calcium carbonate particles were investigated on the Universal Micro-Tribometer.
利用微观摩擦学试验机测定了干摩擦、基础油润滑、添加纳米CaCO3的基础油润滑状态下GCr15钢／20#钢摩擦副的摩擦系数-时间关系曲线,比较分析了三种摩擦条件下曲线的变化规律及影响摩擦系数的因素。
2) 20 steel
20钢
1.
Effect of tensile strain rate on spall fracture in 20 steel;
拉伸应变率对20钢层裂特性的影响
2.
TiC penetration and depositing on 20 steel surface by double-glow plasma alloying;
20钢表面双辉渗镀TiC陶瓷
3.
Flashing butt welding between ferrite spheroidal graphite cast iron and 20 steel;
铁素体球墨铸铁与20钢的闪光对焊
3) steel 20
20钢
1.
Production practice on casting the round tube blank of steel 20 with round tube blank continuous caster
圆坯连铸机浇铸20钢铸坯的生产实践
2.
The morphology and formation mechanism of the microstructure of the composite ion-nitrided plus chromized layers obtained at various chromization temperatures in a plain low-carbon steel (steel 20) were investigated using metallography, X-ray diffraction and microanalysis.
应用金相、X射线衍射和微区成分分析研究了20钢经离子氮化后在不同温度渗铬(复合渗铬)所得渗铬层的显微组织及其生成机制。
3.
The microstructure and fracture morpholo gy of steel 20 were studied using scanning electron microscope (SEM) and X-ray diffractometer (XRD).
利用光学显微镜、扫描电子显微镜及X射线能谱仪对20钢火药筒失效样品的断口形貌和显微组织进行了分析。
4) 20 dual-phase steel
20双相钢
1.
The effects of high temperature deformation quenching and deformation magnitude on grain size and martensite shape of 20 dual-phase steel are discussed by microstructure observation and analysis.
通过组织观察分析,探讨高温形变淬火及形变量对20双相钢晶粒大小及马氏体形态的影响,实验表明当形变量超过50％时,双相组织明显细化,随着晶粒的细化,板条马氏体的尺寸减小,片状马氏体片长明显减小,片宽变化不大。
5) 20 Steel bend
20钢弯头
6) 20# tube bloom
20管钢
1.
Macro defect control of 20# tube bloom;
20管钢铸坯低倍缺陷控制
补充资料：A3钢试片在济南埋20年后的腐蚀情况
A3钢试片在济南埋20年后的腐蚀情况
A3钢试片在济南埋20年(1 964～1 983芷)后的黯蚀情况\;/俘{“少_，喃IJ扮川竺广{「从、抽人’、1一、洲一比、一了J」一.; 川「乙勺{一尸一L一」.{’l卜朽「列
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条