1)  Ni-Cr
Ni-Cr
1.
Discuss On the Sintering Process of Ni-Cr/BN;
Ni-Cr/BN烧结工艺过程探讨
2.
Study of Ni-Cr High Temperature Solid Self-lubricating Materials Added with Ni Coated MoSi Powders;
添加Ni包覆MoS_2的Ni-Cr高温固体自润滑材料的研究
3.
Studies on Technology and Basic Mechanism of Plating Ni-Fe、Ni-Fe-Cr Alloy Foil and Ni-Cr Alloy;
Ni-Fe、Ni-Fe-Cr合金箔及Ni-Cr合金电沉积工艺和基础理论研究
2)  Ni-Cr-Al
Ni-Cr-Al
1.
Atomic scale computer simulation for Ni-Cr-Al alloy during re-ageing process;
Ni-Cr-Al合金分级时效过程的原子尺度的模拟
2.
Microscopic Phase-Field Simulation for Ni-Cr-Al Alloy during Middle Heat Treatment;
Ni-Cr-Al合金中间处理过程的微观相场模拟
3)  Cu-Ni-Cr Alloy
Cu-Ni-Cr合金
1.
Influence of Heat Treatment Specification on Microstructure and Properties of Cu-Ni-Cr Alloy;
热处理制度对Cu-Ni-Cr合金组织和性能的影响
2.
The Cu-Ni-Cr alloy strip was made using medium frequency smelting-iron mould cast-hot rolling-solution-cold rolling-aging treatment.
采用中频熔炼-铁模铸造-热轧-固溶-冷轧-时效处理工艺,制备了Cu-Ni-Cr合金板材。
4)  Fe-Ni-Cr alloy
Fe-Ni-Cr合金
1.
Electrochemical behaviors of electrodepositing Fe2+,Ni2+,Cr3+ solely and Fe-Ni-Cr alloy have been studied by linear potential scan and cyclic voltammetry and the alloy plating were characterized by means of SEM and XRD in this study.
利用线性电势扫描法和循环伏安法分别讨论了配位剂对Fe2+、Ni2+、Cr3+单独电沉积和Fe-Ni-Cr合金共沉积电化学行为的影响,并采用SEM和XRD技术对合金镀层表面形貌和结构进行了表征。
2.
Fe-Ni-Cr alloy electrodepositing experiment on iron substrate in chlorid-sulfate solution by barrel plating was performed.
在氯化物-硫酸盐混合体系中,在铁基上进行滚镀Fe-Ni-Cr合金实验,结果表明:滚镀所得的Fe-Ni-Cr合金镀层铬的含量只有2%左右,难以提高,且镀层表面质量不佳,常出现滚桶眼子印现象。
3.
The progress of Fe-Ni-Cr alloy plating is summarized.
概述电镀Fe-Ni-Cr合金的发展进程,从电沉积Fe-Ni-Cr合金的基本条件、镀液体系、电镀的类型以及镀层晶体结构类型等几个方面对电镀Fe-Ni-Cr合金的特点进行阐述。
5)  Zn-Ni-Cr-ferrite
Zn-Ni-Cr-铁氧体
6)  Ni-Cr alloy
Ni-Cr合金
1.
Interface microstructure and mechanical properties of Ni-Cr alloy porcelain materials;
Ni-Cr合金烤瓷材料界面组织结构和力学性能
2.
Influences of firing parameters on properties and microstructure of Ni-Cr alloy and porcelain interface;
工艺参数对Ni-Cr合金与陶瓷界面组织性能的影响
3.
Process of pulse electrodeposition of nanocrystalline Ni-Cr alloy from trivalent chromium bath;
三价铬脉冲电沉积纳米晶Ni-Cr合金工艺
参考词条
补充资料：Pt-W-Re-Ni-Cr-Y alloy
分子式：
CAS号：

性质：是铂基含钨、铼、镍、铬和钇的多元合金。钇能细化晶粒，提高硬度和再结晶温度。PtWReNiCrY8-4-2-l-0.5合金的电阻系数73×10-2Ω·mm2/m，电阻温度系数160×10-6/℃，应变灵敏度系数3.2。生产方法同铂钨铼镍铬合金。高温应变材料。800℃时零点漂移(△R/R，％)为负值。经30h后，△R/R值约为-0.1％。

说明：补充资料仅用于学习参考，请勿用于其它任何用途。