1) induction cladding
感应熔覆
1.
Microstructure and forming mechanism of TiC/Ni composite coating in situ synthesized by induction cladding;
感应熔覆原位自生TiC/Ni基复合涂层组织和形成机理
2.
Ni-based composite coating reinforced by TiC particle was fabricated on a substrate of 16Mn steel by induction cladding of the Ni60A,Ti and C alloy powders.
以Ni60A、钛粉和石墨粉为原料,采用高频感应熔覆技术,在16Mn钢表面原位合成了TiC颗粒增强镍基复合材料涂层。
3.
TiC particle reinforced metal matrix composite coating was fabricated on the substrate of 16Mn steel by induction cladding using Ni60A,titanium and carbon powder blends.
以N i60A、Ti粉和石墨粉为原料,利用感应熔覆技术在16Mn钢基材表面制备出原位自生TiC颗粒增强金属基复合涂层,分析了涂层的显微组织,在常温干滑动摩擦条件下评价了涂层的耐磨性能。
2) induction heating
感应熔覆
1.
Various methods were used to analyze the properties of nickel-matrix alloy coating by induction heating.
采用不同的方法分析了感应熔覆镍基合金粉末涂层的性能以及感应涡流在涂层中的分布规律;由GP100高频感应设备和中频感应设备KGPS-M试验了不同截面形状感应器和不同工艺参数下的熔覆过程;通过电子显微镜和X射线扫描研究了高频和中频下涂层元素分布和基体热影响的差别;测量了高频感应和氧-乙炔喷焊N i60的极化曲线;采用GCr15与高频感应、激光熔覆和氧-乙炔喷焊GN i-WC25涂层干磨进行了磨损试验。
3) high frequency induction cladding
高频感应熔覆
1.
Wear resistance properties of micron-WC reinforced Ni60 coating by high frequency induction cladding;
微米WC增强Ni60合金高频感应熔覆涂层耐磨性能
2.
Properties of WC reinforced Ni60 coating prepared by high frequency induction cladding;
高频感应熔覆WC增强Ni60合金涂层性能研究
3.
The micro-nanostructured tungsten carbide (WC) reinforced Ni60A alloy composite coatings were produced on Q235 mild steel by high frequency induction cladding.
采用高频感应熔覆的方法在Q235低碳钢基体上制备了厚度为0。
4) laser induction hybrid rapid cladding(LIHRC)
激光感应复合快速熔覆
6) laser induction hybrid cladding
激光-感应复合熔覆
1.
To solve the problem of the cracking of cladding layer and low cladding efficiency,to choose the reasonable processing parameters,laser induction hybrid cladding experiment was carried out to prepare Ni-based WC composite coatings.
为解决熔覆层易开裂、熔覆效率低的问题以及合理地选择工艺参数,进行了激光-感应复合熔覆Ni基WC涂层的实验,定义了激光高速扫描下的极限熔覆状态,研究了激光比能与粉末面密度对熔覆层宏观形貌的影响规律。
补充资料：熔盐电解法生产铌粉(见熔盐电解法生产钽粉)
熔盐电解法生产铌粉(见熔盐电解法生产钽粉)
production of niobium powder by molten salt electrolysis
rongyand+onjlefa ShengChan n.fen熔盐电解法生产妮粉(produetion。fn;obi-um powder by molten salt eleetrolysls)见熔盐电解法生产担粉。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条