1) ternary carbide
![点击朗读](/dictall/images/read.gif)
三元碳化合物
1.
The ternary carbide Ti_3AlC_2 ceramic powders with high content have been successfully fabricated by mechanical alloying using Ti,Al and C as starting powders.
采用Ti,Al和C元素粉末为反应物原料,通过机械合金化法成功地制备出高含量三元碳化合物Ti_3AlC_2陶瓷粉体。
2.
The singe phase ternary carbide of Ti2AlC1 x was first successfully synthesized through a combustion synthesis process by using Ti, Al and C powders as raw materials.
采用Ti,Al和C元素粉末为反应物原料,通过燃烧合成法首次成功地制备出了单相三元碳化合物Ti2AlC1-x。
2) ternary compound
![点击朗读](/dictall/images/read.gif)
三元化合物
1.
The structure,composition range and phase equilibrium of a ternary compound T_1 at the low Nd side in the Mg-Zn-Nd system have been investigated by SEM,EPMA,XRD and TEM.
利用扫描电镜,电子探针、X射线衍射仪和透射电镜对Mg-Zn-Nd系低Nd三元化合物T_1相的成分、结构及其相平衡关系进行了研究。
2.
It has been shown that the ternary compounds T2 and T3 exist in the Mg-rich corner of the Mg-Zn-Nd system.
3%的三元化合物T2相,和成分范围为Mg:25。
3) ternary compounds
![点击朗读](/dictall/images/read.gif)
三元化合物
1.
Ternary compounds MeI AgI (Me:K,Rb,Cs) thin films were grown by vacuum evaporation.
![点击朗读](/dictall/images/read.gif)
介绍了用真空蒸发技术制备三元化合物体系MeI AgI(Me :K ,Rb ,Cs)中各种材料薄膜的工艺过程 ,为实现不同温度下的光谱测量 ,设计了真空低温测量装置 ,测定并初步分析了薄膜在液氮温度下的激子谱及其规
4) multiple carbide alloy
![点击朗读](/dictall/images/read.gif)
多元碳化物合金
5) ternary compound T'
![点击朗读](/dictall/images/read.gif)
三元化合物T'
1.
The ternary compound T' alloy that is stable single phase from room temperature to 400 has been obtained according to the stoichiometrical composition gained by thermodynamic calculation.
按热力学计算得到的Al5Cu4Zn的化学计量比成分,可以获得由室温至400℃均为稳态单相的三元化合物T'相合金。
6) three mixed complex
![点击朗读](/dictall/images/read.gif)
三元混配化合物
补充资料:聚丙烯/乙烯-丙烯-二烯三元共聚物共混物
分子式:
CAS号:
性质: 为改善聚丙烯的抗冲击性能,尤其是低温冲击性能,常在其中混入一定量的乙丙共聚物。共混物是一种介于橡胶和塑料之间的两相聚合物材料,它在室温下有良好的橡胶弹性和物理机械性能,而高温下又呈熔融流动等塑料加工特性。有良好的耐候性、耐臭氧性,广泛应用于汽车零部件、电器制品。所用橡胶以丙烯含量约50%的具有无定形结构的乙丙橡胶为好。PP/EPDM共混料分三类:热塑性弹性体,其中PP不多于30%;增韧PP,PP含量不低于65%;中间性能产品,作专门用途或其他材料的改性剂。可使用挤出机、密炼机等设备共混,用于注塑、挤塑等成型。
CAS号:
性质: 为改善聚丙烯的抗冲击性能,尤其是低温冲击性能,常在其中混入一定量的乙丙共聚物。共混物是一种介于橡胶和塑料之间的两相聚合物材料,它在室温下有良好的橡胶弹性和物理机械性能,而高温下又呈熔融流动等塑料加工特性。有良好的耐候性、耐臭氧性,广泛应用于汽车零部件、电器制品。所用橡胶以丙烯含量约50%的具有无定形结构的乙丙橡胶为好。PP/EPDM共混料分三类:热塑性弹性体,其中PP不多于30%;增韧PP,PP含量不低于65%;中间性能产品,作专门用途或其他材料的改性剂。可使用挤出机、密炼机等设备共混,用于注塑、挤塑等成型。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条