1) containing-Ti prealloyed powder
含Ti预合金粉末
1.
A containing-Ti prealloyed powder was designed to be used as an adhesion matrix to increase the diamond retention,and then made from the Cu and Mn by gas atomization.
设计并用气雾化法试制以CuMn为基的含Ti预合金粉末,以此为粘结胎体在粗真空钎焊条件下制备金刚石复合材料,考察预合金与金刚石之间的界面结合状况。
2) W-Ti prealloyed powders
W-Ti预合金粉末
3) Ti-17 powder alloy
Ti-17粉末合金
1.
Ti-17 powder alloy was prepared by the method of sintering + isothermal forging,and the densities and transformation of microstructure in the process of preparing powder alloy were investigated.
采用烧结+等温锻造的方法制备Ti-17粉末合金,对粉末合金制备过程中各工序的密度、显微组织变化规律等进行了试验研究。
4) Fe C Ti alloy powder
Fe-C-Ti合金粉末
5) prealloyed powder
预合金粉末
1.
Application of prealloyed powders used in production of diamond saw blade cutting granite;
预合金粉末在切割花岗岩锯片生产中的应用研究
2.
Follow prealloyed powder was manufactured by high-pressure water atomization.
采用高压水雾化快冷技术,将熔融的金属液流注入上部设有漏包坩埚的水雾化喷嘴,当熔融的金属液流通过倒流嘴流经喷嘴时,被喷嘴射出的高速水流击碎成小液滴,随后合金液滴落在水中凝固成粉末的方法制取Follow系列预合金胎体粉末;利用SEM,差热分析等手段研究了粉末的特性,结果表明预合金粉末呈不规则状,压制性能好,成分均匀,烧结温度低;用Follow系列预合金粉末制成金刚石工具,切割性能优异,可切中硬花岗岩品板500m~2以上,中硬花岗岩荒料250m~2以上,具有寿命长切割效率高,成本低等特点。
3.
Atomization is used to prepare prealloyed powder.
常用的制备预合金粉末的方法是雾化法，虽然该法生产的预合金粉末具有烧结温度低，合金化程度高等优点。
6) pre-alloyed powder
预合金粉末
1.
Study on pre-alloyed powder used as backing powder in laser welding diamond tools;
一种激光焊接金刚石锯片过渡层用预合金粉末的性能研究
2.
Preparation of pre-alloyed powder and it′s application in diamond tools;
金刚石工具胎体预合金粉末制取与应用
3.
The characteristics and preparation method of superfine pre-alloyed powders are summarized,with a focus on application of superfine pre-alloyed powders for diamond tools.
本文简要综述了超细预合金粉末的特性及其制备方法。
补充资料：Ti_(3)Al基合金(金属间化合物)涡轮导风板
Ti_(3)Al基合金(金属间化合物)涡轮导风板
TiaA，基合金(金属间化合物)涡、、风*。利;:，
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条