1) unconsolidated abrasive
散体磨料
1.
The abrasion resistance of coal mining machine bit tooth,was adopted self-regulating test bed of unconsolidated abrasive vibratory wear and ordinary fixed abrasive wear,abrasion resistance of bit from different factory was analysed.
采煤机截齿齿体耐磨性直接影响截齿使用寿命,采用自制的散体磨料振动磨损试验机与普遍使用的固定磨料磨损试验机,对国内外几个厂家截齿齿体耐磨性进行对比分析。
2.
For researching the sample of drawing temper,adopt self-regulating unconsolidated abrasive wear testing machine,experimentized unconsolidated abrasive wear with different frequency,found the wear law about 42CrMo steel of unconsolidated abrasive wear.
针对截齿齿体常用材料42CrMo钢的低温、中温、高温回火试样,采用自制的散体磨料振动磨损试验机,进行不同振动频率的散体磨料磨损试验研究,发现了在本试验条件下散体磨料振动磨损对42CrMo钢的磨损规律。
2) loose abrasive abrading
散磨料磨蚀
3) abrasive suspension
磨料浆体
1.
Velocity profile of abrasive suspension swirling jet and influence of additive polyacrylamide;
磨料浆体旋转射流的速度分布及其受聚丙烯酰胺添加剂的影响
2.
Research on Abrasive Suspension Jet Technology and Its Mechanism;
磨料浆体射流技术及其机理研究
5) three-body abrasion
三体磨料磨损
1.
In order to study the influence of diameter distribution of abrasive particles on the wear of materials in three-body abrasion,through experiment combined normal distribution coordinate analysis,the distribution of abrasive diameter was precisely measured.
为探讨三体磨料磨损中磨料颗粒粒径的分布对材料磨损性能的影响, 通过试验结合正态概率分布坐标分析的方法, 比较准确地得到磨料粒径的分布情况。
2.
The movement patterns of abrasive particles are of important influence on the wear of materials in three-body abrasion.
在三体磨料磨损中,磨粒的运动方式对金属的磨损有重要影响。
6) three-body abrasive wear
三体磨料磨损
1.
Under heavily drawn plastic deformation, we made nano-structured high strength pearlitic steel reinforced polymer urethanes composites, and investigated the composites' three-body abrasive wear mechanism.
用强烈拉伸塑性变形法制备纳米结构高强度珠光体钢丝,将其与聚氨酯复合制备复合材料,并研究了该复合材料的三体磨料磨损性能。
2.
And the influences of true strain on three-body abrasive wear property under the conditions of abrasive wear using quartz and glass sand were researched.
用深度塑性变形法制备高强度珠光体钢丝,并研究了在石英砂和玻璃砂两种磨料下真应变对三体磨料磨损性能的影响。
3.
The three-body abrasive wear experiment was performed at the room temperature.
通过常温三体磨料磨损实验研究了复合材料的磨损性能。
补充资料：非水分散体涂料
分子式：
分子量：
CAS号：
性质：简称NAD涂料。溶剂分散型涂料的一种。高分子量的涂料成膜物质以胶态质点（粒径0.1-0.8微米之间）分散在非极性有机溶剂中而组成。目前实用的为非水分散丙烯酸涂料，为丙烯酸聚合物分散在烃类溶剂中的涂料，固体份含量高而粘度低，使用低污染溶剂。涂料流变性能好，可厚涂施工，不易出现流挂。主要用作工业品装饰面漆，如汽车用金属闪光漆；也用作卷材涂料。但非水分散体树脂制备较困难。
分子量：
CAS号：
性质：简称NAD涂料。溶剂分散型涂料的一种。高分子量的涂料成膜物质以胶态质点（粒径0.1-0.8微米之间）分散在非极性有机溶剂中而组成。目前实用的为非水分散丙烯酸涂料，为丙烯酸聚合物分散在烃类溶剂中的涂料，固体份含量高而粘度低，使用低污染溶剂。涂料流变性能好，可厚涂施工，不易出现流挂。主要用作工业品装饰面漆，如汽车用金属闪光漆；也用作卷材涂料。但非水分散体树脂制备较困难。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条