1) lamellar phase
层状相
1.
The tranisition from a lamellar phase formed from a nonionic surfactant mixture system LA070/C8H17OH/H2O to a viscoelastic vesicle-phase occured by adding a little amount of ionic surfactant due to the formation of the charged bilayers which led to the change of the curvature of the bilayers.
向一种非离子表面活性剂LA070(英文名AlcoholC12-C16Poly(1-6)Ethoxylate)复配体系LA070/C8H17OH/H2O形成的层状相中加入离子型表面活性剂使其电荷化,在电荷诱导下,双分子层的曲率发生变化,闭合形成具有黏弹性的囊泡相。
2) laminar dispersed phase
层状分散相
3) laminar morphology
层状分散相态
1.
Study on Submicro-morphology, Reological Properties and Compatibility of HDPE/UHMWPA Blends with Laminar Morphology;
本文研究了HDPE/UHMWPA共混体系的相容性及各组分的流变性能,据此选取了制备层状分散合金的工艺参数,获得了具有各种层状分散相态的共混物。
4) layered
[英]['leiə] [美]['leɚ]
层状
1.
Synthesis and electrochemical properties of layered LiNi_(1/2-x)Co_(2x)Mn_(1/2-x)O_2 cathode material;
层状LiNi_(1/2-x)Co_(2x)Mn_(1/2-x)O_2正极材料的合成与电化学性能研究
2.
Study of oxidative manganese lithium layered structure material of the lithium ion battery;
锂离子电池层状氧化锂锰的合成及掺杂改性研究进展
3.
In this paper,the structure of layered birnessite manganese oxide was introduced.
本文概述了锰氧化物中层状Birnessite锰氧化物的结构特点,介绍了其合成方法、应用现状等,总结了层状Birnessite型锰氧化物的优点,并对其研究发展趋势作了展望。
5) lamellar
[英][lə'melə] [美][lə'mɛlɚ]
层状
1.
Platinum nanowires were electrodeposited in a lamellar lyotropic liquid crystal,composed of nonionic surfactant tetraethylene glycol monododecyl ether and H2PtCl6 aqueous solution.
以非离子表面活性剂四氧乙烯基正十二烷基醚与氯铂酸水溶液构建层状溶致液晶,通过电沉积技术制备了金属铂纳米线。
2.
The mesoporous molecular sieve has vesicle-like particle texture and lamellar framework, as confirmed by Scanning elec.
1998年,Pinnavaia等[6,7]用gem ini型N 烷基亚乙基二胺(CnH2n+1NH(CH2)2NH2)中性表面活性剂,通过正硅酸乙酯(TEOS)水解,用氢键组装路线合成出了囊泡状粒子形态、层状骨架的中孔分子筛(MSU G)。
6) multilayer
[英]['mʌlti,leiə] [美]['mʌltɪ,leɚ]
层状
1.
The synthesis of MoS2/Ti3SiC2 multilayer composite materials that the content of MoS2 is 2% was studied by hot press sintering with different sintered temperature.
采用热压烧结方法制备MoS2/Ti3SiC(2MoS2质量分数为2%)的层状复合材料。
2.
The MoS2/Ti3SiC2 multilayer materials were prepared by multistep that pre-synthesized Ti3SiC2 powders are used to prepare multilayer materials.
研究了采用分步法制备MoS_2/Ti_3SiC_2层状复合材料的工艺,其制备过程分2步进行。
补充资料：层状结构催化剂
分子式：
CAS号：
性质：在层状结构物中层与层之间引进有机或无机的基因，从而具有催化作用的催化剂。其优点是可通过控制层间距(如0.5～4.0nm)，使反应物定向，以达到独特的反应物和产物选择性。层状结构材料可以用天然层状黏土或水滑石等改性，也可以用K2La2Ti3O10等起始层板材料分步交换制得。提高柱层状结构物的热稳定性和水热稳定性，目前还比较困难。
CAS号：
性质：在层状结构物中层与层之间引进有机或无机的基因，从而具有催化作用的催化剂。其优点是可通过控制层间距(如0.5～4.0nm)，使反应物定向，以达到独特的反应物和产物选择性。层状结构材料可以用天然层状黏土或水滑石等改性，也可以用K2La2Ti3O10等起始层板材料分步交换制得。提高柱层状结构物的热稳定性和水热稳定性，目前还比较困难。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条