Pluronic P123,Pluronic P123,在线英语词典,英文翻译,专业英语

1) Pluronic P123

Pluronic P123

2) P123

P123

The block copolymer of ethylene oxide with propylene oxide (EO20PO70EO20,P123) was used as template agent, Titanium(IV) isopropoxide (TTIP) as the inorganic precursor and no any diffsor was used in the study.

本论文以三嵌段高分子表面活性剂EO20PO70EO2(0P123)为模板剂,异丙醇钛(TTIP)为无机母体源,在不加任何稳定剂的条件下采用模板法制得稳定透明的TiO_2凝胶,经煅烧后得到局部结晶有序的纯TiO_2介孔材料。

3) pluronic

pluronic

Preparation,characterization of paclitaxel-loaded Pluronic P105 polymeric micelles and in vitro reversal of multidrug resistant tumor;

紫杉醇Pluronic P105聚合物胶束的制备、表征与逆转肿瘤多药耐药性的体外研究

4) Pluronic

普朗尼克

The inhibitory effect of Pluronic on P-glycoprotein drug pump;

普朗尼克抑制P-糖蛋白药泵的作用

5) P123 template

P123模板剂

6) surfactant P123

P123表面活性剂

Zinc sulfide microspheres are synthesized via a hydrothermal method, using surfactant P123 as template, and a possible mechanism of P123 as template for fabricating zinc sulfide microspheres was pro- posed.

以醋酸锌、硫代乙酰胺为原料,P123表面活性剂为模板,采用水热法,成功合成ZnS微球,并提出其可能的形成机理。

One-dimensional cerium phosphate nanomaterials have been synthesized by the resource of so-dium phosphate and cerium nitrate,via a hydrothermal method,using surfactant P123 as template,as the pH value of solution is 1,the temperature is 140 ℃,the time is 24 h,and a possible mechanism for fabricating the one-dimensional cerium phosphate nanomaterials was proposed.

以磷酸钠、硝酸铈为原料,利用P123表面活性剂的水溶液形成的胶束为反应模板,采用水热法合成工艺,在反应溶液的pH=1,反应温度为140℃,反应时间为24h的条件下成功合成了六方相的CePO4一维纳米发光材料,并提出其可能的形成机理。

参考词条

Pluronic F-68 Pluronic~ F127 Pluronic F68 pluronic F-68 Pluronic F-68 pluronic F-68 Pluronic copolymer Pluronic F68 Pluronic F68 Pluronic~ F127 triblock copolymer P123 pluronic block copolymer pluronic block copolymers pluronic block copolymer Pluronic grid representation Pluronic type non ionic surfactant 复合碱式氯化铝教育家

补充资料：HCFC-123

分子式：CHCl₂CF₃
CAS号：

性质：又称氟里昂-123。无色液体。沸点28.7℃,凝固点-107℃。液体密度p_L151.475g/cm3。临界温度185.0℃,临界压力37.4×105Pa。低毒、难燃。化学性质稳定。工业合成方法还在开发中,可由四氯乙烯(或三氯乙烯)与氟化氢在催化剂作用下制得,或由甲基氟仿(HFC-143a)光氯化制得。与不锈钢、铜、铝的接触性能优于CFC-11,是CFC-11的主要替代物,应用于制冷系统或作发泡剂(主要是聚氨酯发泡剂)以及清洗剂。

说明：补充资料仅用于学习参考，请勿用于其它任何用途。

首页 \| 翻译 \| 影视 \| 论坛 \| 索引 Pluronic F127 pluronic micelle

1) Pluronic P123 Pluronic P123 2) P123 P123 1. The block copolymer of ethylene oxide with propylene oxide (EO20PO70EO20,P123) was used as template agent, Titanium(IV) isopropoxide (TTIP) as the inorganic precursor and no any diffsor was used in the study. 本论文以三嵌段高分子表面活性剂EO20PO70EO2(0P123)为模板剂,异丙醇钛(TTIP)为无机母体源,在不加任何稳定剂的条件下采用模板法制得稳定透明的TiO_2凝胶,经煅烧后得到局部结晶有序的纯TiO_2介孔材料。 3) pluronic pluronic 1. Preparation,characterization of paclitaxel-loaded Pluronic P105 polymeric micelles and in vitro reversal of multidrug resistant tumor; 紫杉醇Pluronic P105聚合物胶束的制备、表征与逆转肿瘤多药耐药性的体外研究 4) Pluronic 普朗尼克 1. The inhibitory effect of Pluronic on P-glycoprotein drug pump; 普朗尼克抑制P-糖蛋白药泵的作用 5) P123 template P123模板剂 6) surfactant P123 P123表面活性剂 1. Zinc sulfide microspheres are synthesized via a hydrothermal method, using surfactant P123 as template, and a possible mechanism of P123 as template for fabricating zinc sulfide microspheres was pro- posed. 以醋酸锌、硫代乙酰胺为原料,P123表面活性剂为模板,采用水热法,成功合成ZnS微球,并提出其可能的形成机理。 2. One-dimensional cerium phosphate nanomaterials have been synthesized by the resource of so-dium phosphate and cerium nitrate,via a hydrothermal method,using surfactant P123 as template,as the pH value of solution is 1,the temperature is 140 ℃,the time is 24 h,and a possible mechanism for fabricating the one-dimensional cerium phosphate nanomaterials was proposed. 以磷酸钠、硝酸铈为原料,利用P123表面活性剂的水溶液形成的胶束为反应模板,采用水热法合成工艺,在反应溶液的pH=1,反应温度为140℃,反应时间为24h的条件下成功合成了六方相的CePO4一维纳米发光材料,并提出其可能的形成机理。参考词条 Pluronic F-68 Pluronic~ F127 Pluronic F68 pluronic F-68 Pluronic F-68 pluronic F-68 Pluronic copolymer Pluronic F68 Pluronic F68 Pluronic~ F127 triblock copolymer P123 pluronic block copolymer pluronic block copolymers pluronic block copolymer Pluronic grid representation Pluronic type non ionic surfactant 复合碱式氯化铝教育家补充资料：HCFC-123 分子式：CHCl₂CF₃ CAS号：性质：又称氟里昂-123。无色液体。沸点28.7℃,凝固点-107℃。液体密度p_L151.475g/cm3。临界温度185.0℃,临界压力37.4×105Pa。低毒、难燃。化学性质稳定。工业合成方法还在开发中,可由四氯乙烯(或三氯乙烯)与氟化氢在催化剂作用下制得,或由甲基氟仿(HFC-143a)光氯化制得。与不锈钢、铜、铝的接触性能优于CFC-11,是CFC-11的主要替代物,应用于制冷系统或作发泡剂(主要是聚氨酯发泡剂)以及清洗剂。说明：补充资料仅用于学习参考，请勿用于其它任何用途。
©2008 dictall.com