1) laser-arc hybrid welding
激光电弧复合焊接
1.
Laser-arc hybrid welding is a new developing welding technology, which combines the high power density of lasers with the cheapness and high efficiency of the arc welding to achieve deeper welding penetration and good adaptability.
激光电弧复合焊接是一项新兴的焊接技术,它是将高能量密度的激光与廉价高效的电弧复合在一起进行焊接,从而提高了激光焊接的焊接熔深和适应性。
2.
Laser-arc hybrid welding is a new developing welding technology, which has been well developed abroad, however it is still under the stage of fundamental research in our country.
激光电弧复合焊接是一项新兴的焊接技术,在国外已经发展得相当成熟,而我国在基础研究方面都还存在着许多不足,本文正是在这种背景下,对激光电弧复合焊接进行基础研究。
2) laser-arc hybrid welding
激光-电弧复合焊接
1.
Elimination of high frequency interference during the laser-arc hybrid welding;
激光-电弧复合焊接过程中高频干扰的消除
2.
Application of laser-arc hybrid welding in industry;
激光-电弧复合焊接的应用
3.
The laser-arc hybrid welding technology for LF6 aluminum alloy was introduced.
对LF6铝合金的激光-电弧复合焊接工艺进行了初步研究。
3) YAG laser-arc hybrid welding
YAG激光-电弧复合焊接
4) laser-arc hybrid welding
激光-电弧复合焊
1.
New welding technology of aluminium alloy which is newly researched throughout the world is summarized in the paper,such as laser welding,laser-arc hybrid welding and friction stir welding.
详细介绍了近年来国内外出现的铝合金焊接新技术(激光焊、激光-电弧复合焊以及摩擦搅拌焊)的原理、工艺特点以及在汽车制造中的应用。
2.
Several advanced welding techniques of magnesium alloy were introduced: A-TIG welding, electron beam welding, laser welding, laser-arc hybrid welding and friction stir welding.
介绍了镁合金先进焊接工艺,包括A-TIG焊、电子束焊、激光焊、激光-电弧复合焊和搅拌摩擦焊。
3.
The laser-arc hybrid welding technique takes a full advantage of the two heat sources.
激光-电弧复合焊技术发挥了两种热源的长处,能在不同方面、不同程度上减少或消除传统焊接中的缺陷,提高了激光能量的利用率,是焊接高强铝合金的首选工艺。
5) laser-arc hybrid welding process
激光电弧复合焊
1.
This article describes the principle, characteristics, types, interaction of laser-arc hybrid welding process, it also gives a picture of its currentsituation of research and development and finally concludes that as a new welding technique , the hybrid welding process has a promising future.
介绍了激光电弧复合焊接方法的原理、工艺特点、复合焊的几种形式、复合焊的机理研究现状及复合焊的应用,指出复合焊作为一种新型的焊接方法具有较为广阔的应用前景。
6) laser-plasma hybrid welding
激光-等离子弧复合焊接
1.
Flow patterns in the weld pool during laser-plasma hybrid welding;
为了研究激光-等离子弧复合焊接熔池流动特性,该文建立了焊接过程中液相区、糊状区和固相区的三维模型,采用体热源来模拟小孔效应,并利用有限控制容积法计算了复合焊接熔池的流场和温度场,重点研究了表面张力和电磁力的作用。
补充资料：电弧焊接
把要焊接的金属作为一极，焊条作为另一极，两极接近时产生电弧，使金属和焊条熔化的焊接方法叫做电弧焊接。通称电焊。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条