1) cold water
冷水
1.
Studies on preparation of cold water dispersible CoQ10 containing microencapsulated bead lets and its stability;
冷水溶性辅酶Q10微粒的制备及其稳定性研究
2.
Heat pump systems and equipment exploiting freezing heat from cold water;
利用冷水凝固热的热泵系统与装置
3.
In the precondition of as far as not replacing original apparatus and increasing investment,researched on great temperature difference technique stepping utilized the cold water.
阐述了在改造工程中,尽量不更换原设备、不增加大投资的前提下,应用冷水大温差技术;分析了因冷水量的减少对各部分装置产生的影响;提出了对现有设备进行适当改造的新方法。
2) chilled water
冷水
1.
Theoretical efficiency analysis of absorption cycle refrigeration system with large temperature difference of chilled water;
吸收循环冷水大温差系统理论效率分析
2.
Presents the maintenance and operation management experience of lithium-bromide absorption-type refrigerating machines in stopping for maintenance,chilled water management,cooling water management,solution management and crystal melting.
介绍了溴化锂吸收式制冷机组停机保养、冷水管理、冷却水管理、溶液管理、溶晶方面的维护和管理经验。
3) cooling by water
水冷冷却
4) Hydro pre-cooling
冷水预冷
5) water cooling
水冷
1.
Failure Research for the Water cooling System of ABB High Voltage Inverter;
ABB高压变频器水冷系统特殊故障的研究
2.
The tests included: water cooling manual arc welding cracking test with oblique Y-groove and water cooling submerged arc welding test using welding wire WQ-1 developed by the Technology Center of WISCO and sintered flux CHF101.
根据杭州湾大桥工程的要求 ,对武钢二热轧厂首批生产的 2 0mm厚管桩用钢Q345C -Hq进行了水冷焊接试验研究。
3.
The results showed that the bainite structure can be obtained by water cooling (90℃/s), its properties, special impact value can be remarkably improved.
对这种不含B的微合金钢 ,经水冷( 90℃ /s)可得到贝氏体组织 ,显著提高钢的力学性能 ,特别是冲击性能。
6) water-cooling
[英]['wɔ:təku:l] [美]['wɔtɚ,kul]
水冷
1.
Discussion on the Special Topics of Water-cooling Hydro-generators and the Selection of Cooling Methods for Three Gorges Hydro-generators;
水冷水轮发电机特殊问题及三峡水轮发电机冷却方式选择
2.
The water-cooling two-stroke gasoline engine oil was developed from base oil made by sour crude,no peculiar smell kerosene,PIB with low molecular weight and some domestic additives including pour point depressant,antirust agent,antioxidant,antiwear agent and ashless dispersant,etc.
以中国石化茂名分公司生产的含硫原油基础油、无异味煤油和PIB为基础油组分,加入国产降凝剂、防锈剂、抗氧剂、抗磨剂和无灰分散剂研制出的水冷二冲程油具有较好的润滑性能和清净性能,达到TC-WⅡ规格要求。
3.
In order to get the different effect on steel ingot inner structure while using ultrasonic vibration under various conditions, the experiments compare with and without ultrasonic vibration on the water-cooling solidified paraffin ingot under different casting temperature and time, and gets a better ingot inner structure under a comparative lower temperature (<62 ℃) while the yield is reduced.
为了探索不同条件下使用超声振动对改善钢坯凝固组织结构的作用,试验对不同浇注温度、时间下有无超声振动的水冷凝固石蜡铸坯进行了对比研究,得到较低温度(62℃以下)时超声冷却对改善铸坯内部结构有很好的效果,但减小了收得率;浇注温度为72℃时,超声作用更多体现在搅拌石蜡液芯上,提高了铸坯的收得率,作用时间长时(20min)可以改善铸坯内部结构。
补充资料:冷水
①凉水:泼~ㄧ~浇头(比喻受到意外的打击或希望突然破灭)。②生水:喝~容易得病。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条