1) organic vapor
有机蒸气
1.
Progress in organic vapor purification and recovery by pressure swing adsorption technology;
变压吸附技术净化分离有机蒸气的研究进展
2.
A scheme that could be used to compute the permeability and separation factor of organic vapor/nitrogen mixture permeation through porous carbon membranes was proposed,which based on non-equilibrium molecular dynamics method and considered the effect of extra force field.
基于考虑渗透过程中外加力场影响的非平衡分子动力学方法,建立了计算有机蒸气/氮气混合物透过多孔C膜的渗透系数和分离因子的方案;并对甲烷/氮气(CH4/N2)和丙酮/氮气(CH3COCH3/N2)两种混合物透过炭膜的渗透过程进行计算。
3.
Vapor permeation is an important process mat belongs to gas membrane separation technology, and it is an effective method to recycle and separate organic vapors.
蒸气渗透过程属于气体膜分离技术,是回收分离有机蒸气很有效的方法。
2) VOCs
有机蒸气
1.
This review focuses on the research and application of gas membrane separation in environmental protection,especially in separation of VOCs and acid gases from air.
着重介绍了气体膜分离技术在环境保护领域的应用研究,包括有机蒸气(VOCs)的分离及酸性气体的分离,同时展望了该技术的发展趋势。
3) VOC recycling
有机蒸气回收
4) organic vapor membrane method
有机蒸气膜法
1.
The technology about organic vapor membrane method for VCM recovery from tail gas in PVC production was introduced, which includes the method's basic principles, process, main control parameters and equipment performance.
介绍了采用有机蒸气膜法回收PVC生产尾气中的氯乙烯单体的工艺技术、基本原理、工艺流程、主要控制指标和设备性能,并讨论了膜法氯乙烯回收系统非正常工况及处理对策。
5) VOC separation
有机蒸气分离
6) extract with water added by residual solvent
有机溶剂-水蒸气蒸馏
1.
Method:The chemical compositions of the volatile constituents of the plant which were obtained by extract with water added by residual solvent were analyzed by GC-MS equipped with a elastic quartz capillary column-HP-5MS 5% Phenyl Methyl Siloxane (30m×0.
方法:利用有机溶剂-水蒸气蒸馏法提取苦石莲挥发油,用GC-MS进行测定,色谱柱为HP-5MS5% Phenyl Methyl Siloxane弹性石英毛细管柱(30m×0。
补充资料：有机覆层:有机覆层
在基体材料表面覆以有机材料的材料保护层。在机械製造中﹐有机覆层的绝大部分是涂装层﹐或称油漆层。此外﹐也有用橡胶或塑料作为覆层的。需要抗酸﹑硷和抗腐蚀性气体和液体的钢铁件﹐常用厚约 3毫米的橡胶(如氯丁橡胶)或塑料(如氯化亚乙烯共聚物)黏在表面﹐可长期保护基体不受腐蚀。这种覆层主要用在大型抗蚀容器或排气系统中。埋在土壤中的金属构件﹐常以聚乙烯带包裹保护。在喷鉬或喷不锈钢的表面上涂覆聚四氟乙烯﹐在150℃温度下摩擦係数很低﹐磨损轻微﹐适於製造低载荷和要求高度清洁的滑动轴承﹐或用在食品﹑精细包装和纺织机械上。各国的Du﹑Dx轴承都是以塑料与金属复合製成的。通过静电喷涂将环氧树脂﹑氯化聚醚﹑聚四氟乙烯以及聚氯乙烯等塑料粉末涂覆在金属表面﹐可获多种抗化学腐蚀性极好的覆层﹐可用於输水﹑污水处理和海洋平台的设备上。有机覆层在辉光放电情况下﹐有机单体可以聚合成无针孔的有机膜﹐用作电容器的介质层。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条