1) stress
筒体应力
2) shell
筒体
1.
Finite element method of calculating reaction forces of large kiln shell with multi-supports;
大型多支承回转窑筒体支承力的有限元解法
2.
Numerical Simulating Calculation and Design of the Automatic Water-filter Shell;
自动滤水器筒体的数值模拟计算与设计
3.
The Development of Super Large Shell Made of 16MnR (HIC) Anti-Hydrogen Steel Used for Cold High Pressure Separator;
冷高压分离器16MnR(HIC)抗氢钢超大型筒体研制
3) drum
筒体
1.
decreased the elevation angle of the drum of the secondary blender and increased the rotating speed of the drum,which decreased the mixing time of materials and enhanced ball making efficiency of the mixing materials.
南钢烧结厂二次混合机通过降低筒体的仰角、提升筒体的转速,增加了混合料的混匀时间,提高了混合料的造球效率,介绍了设计中各种部件的选型和校核计算,该设备投产后大幅度提高了生产能力。
2.
And the paper introduces structure feature and craft flow of KaiYuan CFB,hot stamping pressed to format once is used for head,drum is formatted with pressing or rolling.
本文介绍了国内首台在引进技术的基础上开发的300MW大型循环流化床锅炉-开远循环流化床锅筒,并介绍了开远循环流化床锅筒的结构特点以及简要的工艺制造流程,封头采用一次热压成形,筒体采用压制成形或卷制成形,并解决了下降管接头的加工难题以及总装时的焊接难点,为大型循环流化床锅炉的制造留下了宝贵的经验。
4) Cylinder
筒体
1.
Chemical Explosion Dissection of the Cylinder of a Pyrolysis Gas Washing Tower;
裂解气洗涤塔筒体化学爆炸剖析
2.
Resistant Wear Overlaying of the Cylinder and Stirrer of a Slaker;
石灰消化器筒体与搅拌轴耐磨堆焊
3.
FEM analysis for the vessel existing big fault between head and cylinder;
封头与筒体大错边容器有限元分析
5) Barrel
筒体
1.
Alteration to barrel of10000t/d rotary kiln of Tongling Conch Group;
铜陵海螺10000t/d回转窑筒体改造实施方案
2.
Experimental study on fractional efficiency of cyclone dust collector without barrel;
无筒体旋风除尘器分级效率的实验研究
3.
Analyzed fabrication technology of large-size barrel.
剖析了大型筒体的制作工艺,以及筒节卷制、焊接、机加工到筒节组对等过程的质量控制;介绍了为提高筒体制作质量所采取的一些措施。
6) tube
筒体
1.
Study and Application of Construction Technology Used for Ultra-high Concrete Tube Structure;
超高圆筒体混凝土结构施工工艺技术的研究和应用
2.
Shear Lag Effect Research and Simplified Analysis of the Tube Structures;
筒体结构剪力滞后效应研究及其简化分析
3.
In order to research on the earthquake resistance behavior of the short leg shear wall tube structure system, a 1/20 scale model of this structure was constructed and tested on the shaking table with several earthquake waves.
为研究短肢剪力墙筒体结构体系的抗震性能 ,采用数种地震波形 ,对一栋采用这种结构体系的 3 0层高楼模型 (缩比为 1 2 0 )进行了模拟多种烈度地震振动台试验 。
参考词条
补充资料：轧辊残余应力(见轧辊应力)
轧辊残余应力(见轧辊应力)
residual stresses in roll
zhagun eanyu yingli轧辊残余应力(residual stresses in roll)见礼辐应力。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。