1) two-point method
两点法
1.
On the basis of electric eddy current's characteristic that non-contact measurement,we measure boring cutter's radial move accurately with two-point method,to improve the machining precision.
结合电涡流传感器非接触测量的特点,利用两点法对镗刀的径向位移进行精确测量,以提高加工精度。
2.
Common algorithms include derivation of voltage of each phase,DQ transformation method by delaying single phase voltage by 60° to construct three-phase voltage,DQ decomposition method through derivation to construct three-phase virtual voltage,and two-point method.
常见的检测算法有每相电压量导数算法、单相电压延迟60°构造三相电压dq变换法、求导数法构造三相虚拟电压的dq分解法和两点法。
3.
Through analyzing the imaging character of staring FPA and scanning FPA,the paper proposes that two-point method is the more practical way which solves the problem.
红外焦平面器件的非均匀性已经成为制约红外成像质量的主要问题,通过对凝视型和扫描型FPA器件成像特点的分析,综合几种校正技术,认为两点法是目前最实用的处理方法。
2) two point method
两点法
1.
Compare to Five point method,Two point method is convenient and accurate in the day-to-day test,the error between them is less than 0.
通过大量的试验证明,采用两点法分析既方便又准确,与用五点法分析相比两者相对误差在0。
2.
The two point method of deducing unknown side from known side is widely used in large scale map surveying, esp.
大比例尺地形图在实际工程中有较大的作用 ,而两点法已知边推未知边在大比例尺测图中有很重要的作用 ,特别是在城市房屋和矩形建筑物等地物的测量中有重要的意义。
3) two-dot method
两点法
1.
Path planning for mobile robot based on the two-dot method;
基于两点法的机器人路径规划
2.
This paper introduces a new method improved by two-dot method,consequently the shortage gained improvement,the new method is feasibly improved by the imitated experiment.
BUG理论是解决未知环境下机器人路径规划问题的一种简单而实用的方法,但它的不足之处是冗余度大,用两点法改进BUG理论,从而很好的弥补了BUG理论的不足,仿真实验表明,该方法是可行的,对环境的适用性强、效果好。
3.
The paper discusses the algorithm of path planning of mobile robot in uncertainty environment and presents a new algorithm-a fuzzy control method based on two-dot method.
该文对不确定环境下移动机器人路径算法进行了研究,并提出了一种新算法-基于两点法的模糊控制算法。
4) two points method
两点法
1.
Application of tolerance zone to calculating locating error with two points method through calculation;
公差带在两点法计算定位误差中的应用
5) two-pointed method
两点法
1.
The article introduces two-pointed method application and the merit in bearing outer-enclosure measurement.
介绍了两点法在外圈参数测量中的应用及其优点,在阐述测量原理的基础上,分析了采集系统的组成、传感器的选择和同步采集的实现。
6) two-endpoint method
两端点法
1.
The article describes compactly the method and step of straightness error evaluation by two-endpoint method, least square method and minimum zone method.
本文简要叙述了用两端点法、最小二乘法和最小区域法来评定平面内直线度误差的求解方法和步骤。
补充资料：点对点法
分子式：
CAS号：
性质：发射光谱分析中，将金属试样制成两个锥体状电极，分别作为光源的上下电极，彼此相对以电弧或火花法进行激发摄谱。该法因无辅助电极，所摄光谱中可无其伴存谱线。
CAS号：
性质：发射光谱分析中，将金属试样制成两个锥体状电极，分别作为光源的上下电极，彼此相对以电弧或火花法进行激发摄谱。该法因无辅助电极，所摄光谱中可无其伴存谱线。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条