1) slip-casting
粉浆浇注法
1.
ZrO_2/Ni functionally graded materials was fabricated via slip-casting under a gradient magnetic field(0.
根据不同组分的磁性差异,提出一种在梯度磁场中,采用粉浆浇注法制备铁磁性/非磁性功能梯度材料的方法,并用此方法制备出成分连续变化的ZrO_2/Ni功能梯度材料。
2) slurry casting
粉浆浇注
1.
Experiment study of aluminum electrolysis electrode prepared with slurry casting method;
粉浆浇注法制备较大尺寸金属陶瓷材料的试验研究
2.
Stainless steel filter tube porous materials were prepared by slurry casting using gas-atomized powders of austenitic stainless steel 316L.
以气雾化奥氏体316L不锈钢粉末为原料,采用粉浆浇注法制备不锈钢过滤管多孔材料,分析了烧结工艺对烧结坯过滤性能的影响,对烧结后材料的开孔隙率、孔径及透气度进行了研究。
3) slip-casting
粉浆浇注
1.
Present situation and perspective of slip-casting;
粉浆浇注成形的现状与展望
2.
Fe-WC-Cu composite material was produced by slip-casting and infiltration method.
利用粉浆浇注-熔渗法制备Fe-WC-Cu复合材料,研究球磨时间、pH值和(NaPO3)6含量对粉浆流动性的影响。
4) slip casting
粉浆浇注
1.
The slip casting technique was used to prepare the samples of sintered wick.
采用粉浆浇注工艺和氢气还原烧结工艺研制小型CPL用烧结镍毛细芯,通过优选粉浆液固比、添加剂的种类与数量、浆料pH值等参数制备了符合设计要求的烧结毛细芯。
2.
Fe-WC-Cu composites were produced by slip casting and copper infiltration method.
利用粉浆浇注-熔渗法制备Fe-WC-Cu复合材料。
3.
Fe-WC-Cu composite was produced by slip casting and infiltration.
利用粉浆浇注-熔渗法制备了Fe-WC-Cu复合材料。
5) grain mud casting method
颗粒泥浆浇注法
6) slip casting
泥浆浇注
1.
Slip casting was a molding method of large area occupied and high labor intensity,but it is a good molding method on the forming of corundum ceramics with the high hard brittle,this method has advantages of extensive adaptability and low production cost.
笔者主要讨论泥浆浇注成形刚玉瓷时,在生产工艺中应控制的几个要点问题,并对可能产生的缺陷进行了分析。
补充资料：熔盐电解法生产铌粉(见熔盐电解法生产钽粉)
熔盐电解法生产铌粉(见熔盐电解法生产钽粉)
production of niobium powder by molten salt electrolysis
rongyand+onjlefa ShengChan n.fen熔盐电解法生产妮粉(produetion。fn;obi-um powder by molten salt eleetrolysls)见熔盐电解法生产担粉。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条