1) carbon fiber reinforced
碳纤维增强
1.
The smart properties of carbon fiber reinforced mortar prepared by hydrothermal hot-pressing were investigated and the microstructure was observed by OM and SEM.
采用水热热压技术制备了短切碳纤维增强水泥复合砂浆，讨论了以材料本身作为探头时电阻测量信号的机敏效应，并用ＯＭ，ＳＥＭ观察了材料的显微结构。
2.
Electrical conductivity of carbon fiber reinforced cement composite was measured.
研究了碳纤维增强水泥复合材料的电导性能，用扫描电子显微镜（ＳＥＭ）观察了材料产生电导渗流时的显微结构，讨论了纤维掺量和纤维长度对电导性能的影响以及受载过程中材料电导率的变化规律。
3.
Four types of carbon fiber reinforced paper-based friction materials with different Al2O3 content were prepared using paper-making process.
采用造纸工艺制备出4种不同Al2O3含量的碳纤维增强纸基摩擦材料。
2) short carbon fiber reinforced
短碳纤维增强
1.
The short carbon fiber reinforced nickel based composite and Ni80Cr20 alloy were prepared by the powder metallurgy method for comparison studies.
采用粉末冶金法制备了短碳纤维增强镍基复合材料和N i80Cr20合金,并根据Larson-M iller参数方程对两种材料的高温力学性能进行了模拟对比研究。
3) carbon fiber reinforced cement
碳纤维增强水泥
1.
At first, this paper introduces carbon fiber's properties and structure, then it introduces the preparation of short carbon fiber reinforced cement and continuous carbon fiber reinforced cement.
碳纤维增强水泥是先进增强材料与传统建筑材料的结合体。
4) CFRP
碳纤维增强塑料
1.
Application of CFRP:Problems and Solutions;
碳纤维增强塑料应用中存在的问题与对策
2.
The new moulding technology of CFRP profiled pole was introduced.
介绍了碳纤维增强塑料(CFRP)异形杆的一种新的成型方法,采用了聚全氟乙丙烯(FEP)热收缩管封装技术,使CFRP杆件的外表面光亮圆滑,实现了近似无余量成型,同时通过铺层设计和成型工艺控制,使支撑杆轴向线膨胀系数达到1 2×10-6K-1,满足了设计小于1 5×10-6K-1的要求,大大提高了支撑杆的尺寸稳定性。
3.
The bending properties of cement mortar externally bonded with carbon fiber reinforced plastics(CFRP) sheets at different temperatures were studied by means of three-point bending test.
用三点弯曲试验研究了水泥砂浆外贴碳纤维片材后在不同温度下的抗弯性能,探讨了温度对碳纤维增强塑料(CFRP)-水泥砂浆抗弯性能的影响。
5) CFRW
碳纤维增强木材
1.
For example, crabon fiber reinforced wood compisite(CFRW)is one of new materials of architecture, reparation,and decoration.
碳纤维增强木材复合材料(CFRW)是新一代建筑材料、修补材料和装饰材料之一。
6) carbon fiber reinforced plastics
碳纤维增强塑料
1.
This paper deals with the way to evaluate the adhesion properties of the boundary between fiber and matriz resin in the carbon fiber reinforced plastics.
本文在论述碳纤维增强塑料中纤维与基体树脂界面粘接性能评价方法的同时,介绍几种国外近来所采用的新方法及其特征。
2.
The applications of carbon fiber renforced carbon matrix ( C/C ) composites, carbon fiber reinforced plastics on solid rocket motor ( SRM ) home and abroad is reviewed.
本文简要地论述了国内外碳/碳复合材料 (C/C)、碳纤维增强塑料 (C/P)在固体火箭发动机壳体、喷管上的应用。
3.
The degree of cure and temperature are coupled during the pultrusion of carbon fiber reinforced plastics(CFRP).
碳纤维增强塑料(CFRP)拉挤成型过程中固化度和温度变化为强耦合关系。
补充资料：碳纤维增强聚芳砜
分子式：
CAS号：
性质：在聚芳砜树脂加碳纤维进行混炼而成的一种增强聚芳砜。具有较高的热稳定性，热变形温度210℃，拉伸强度150MPa，弯曲强度210MPa。广泛应用于耐高温的结构材料及复合材料。
CAS号：
性质：在聚芳砜树脂加碳纤维进行混炼而成的一种增强聚芳砜。具有较高的热稳定性，热变形温度210℃，拉伸强度150MPa，弯曲强度210MPa。广泛应用于耐高温的结构材料及复合材料。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条